Griot's Ceramic Headlight Restoration Kit offers an effective solution for restoring severely oxidized and yellowed headlights to pristine clarity. Designed by Griot's Garage, this comprehensive kit is engineered to address foggy, ineffective headlights without the need for power tools. It includes proprietary oxidation removing wipes, a comfortable foam contour grip, and high-quality abrasives to eliminate failed factory coatings. The restoration process is finished with a lifetime ceramic coating from Cerakote Ceramics, ensuring long-lasting protection. The kit contains everything needed: 2 Ceramic Headlight Coating Wipes, a Contour Grip Applicator, foam-backed sanding discs (2x 1000 grit, 1x 2000 grit, 1x 3000 grit), 2 Oxidation Remover Wipes, and 2 protective nitrile gloves.

• Restores Clarity: Removes severe oxidation and yellowing for crystal-clear headlights.
• Easy Application: No power tools required; includes ergonomic foam contour grip.
• High-Quality Abrasives: Foam-backed sanding discs in multiple grits for effective restoration.
• Lifetime Protection: Ceramic coating from Cerakote Ceramics for long-lasting clarity.
• Complete Kit: Includes all necessary components for a successful headlight restoration.

CA residents - WARNING: This product can expose you to chemicals including Methanol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Position auxillary lights cleanly for secure, vibration-free illumination ahead and to the side of the vehicle. Shares existing factory hood hinge mounting location. Lights sold separately.

It's always best to see the road - or lackthereof - ahead. With this in mind, improved illumination is a must-have for safe driving when off-roading, overlanding, or just exploring the road less traveled.

Common points for mounting aux lighting include the front bumper for long-throw lighting, the roof for high clearance/high perspective lighting, and the base of the A-pillar for ditch lighting. These brackets provide a clean, fully reverseable install point for this third lighting need - ditch lights. Fear no ditch, no dark, obstructed, or unknown path through the modern miracle of well positioned auxiliary lighting.

Utilizing factory hood mounting locations (read: strong, movement free mounting) and hardware, these satin black powder coated 5052 aluminum brackets wrap around the top of the hood adjacent to the A-pillar, and offer an ideal base for mounting auxillary lights of your choosing (sold separately). Lights are positioned low and snug against the vehicle, with ample room for light installation, while keeping lights low in your line of sight.

In-house designed by ECS design engineer Tali, the design and install of these brackets are featured in the "Adding Off Road Lights to the X5" Episode of the Built by Mike Overland series (found here: https://www.youtube.com/watch?v=N7RiHu8sDAo&t=642s) starting at 10:42.

Expand your lighting with this stout mounting system for your E53! Direct fit and aesthetic upgrade for your overland build.

Lighting is a necessity when off-roading, not many times can you add a component that looks this good while also carrying out you utility needs. ECS is now offering a light mounting system for the E53 X5 looks so good we thought about leaving the lights off of it! The light bar features factory mounting with rubber end caps to finish off the installation.

The lighting options with ECS's mounting system are basically endless. The lower bar is 33" in overall width to utilize the factory mounting and features an upper section that spans 24" in diameter. A perfectly proportional setup could include a 24" light bar or up to 4 individual light pods. There are 4 welded and reinforced mounting tabs that span 17" across the bar that are situated 5-3/8" apart from each other which leaves plenty or room for individual lights but can also accommodate almost any light bar you could want.

Common points for mounting aux lighting include the front bumper for long-throw lighting, the roof for high clearance/high perspective lighting, and the base of the A-pillar for ditch lighting. This front mount light bar bracket provides a clean, fully reversible install point for your long throw lighting needs. Fear no ditch, no dark, obstructed, or unknown path through the modern miracle of this beefy front light bar mounting system.

This front light bar mounting system doubles as both a utility for lighting and a rugged aesthetic upgrade. If you are looking to upgrade lighting but are not ready yet, fear not. You can start by adding this awesome light bar mounting system and choose your lighting option later! It looks that good.

Featured in the "Built by Mike" YouTube series - CLICK HERE -

Features:

Accommodates 2 large light pods, 4 small light pods, or the light bar of your choosing

Fits Pre-facelift and LCI Models

Optional tow hook attachment (T#20749267)

Design:

Satin black powder coated mild steel tube

Rugged design utilizes factory tow hook mounting locations for sturdy attachment

Exterior coating to match any build

Positioned to allow most lights to clear the hood when opened