Tasked with keeping everything properly lubricated, the oiling system is one of the most if not THE most fundamental parts of the engine. Make sure that everything is in good working order and flowing properly to ensure your engine has a long and trouble-free service life.
The M54 engine has well-documented issues caused by harmonics. The extreme vibrations cause the weak oil pump shaft to shear off or the oil pump nut to come loose and fall off, all of which results in an instant loss of oil pressure. Achilles Motorsports decided to develop a solution to fix all of these known issues. Achilles takes their oil pump shafts to the extreme, using only the toughest materials and heat treatment processes to ensure optimum strength. The core of this kit is a hardened Chromoly shaft that is centerless ground to ensure absolute trueness. The shaft is engineered with an exclusive square key lock system that not only prevents the gear from ever spinning on the shaft but also adds strength to the area to which the gear mounts. Achilles Motorsports then replaced the pesky oil pump nut with an extended length bolt that is EDM drilled for safety wire to properly secure it for all conditions. Don't wait for your oil pump to fail and leave you stuck with costly engine repairs! Key Features: Hardened Chromoly centerless ground shaft EDM Drilled Bolt with a piece of safety wire included Grade 8 extended length hardware to secure the gear to the shaft Left hand threaded to prevent it from unexpectedly coming loose Exclusive Square key lock shaft and drive gear 100% serviceable & rebuildable without the need for grinding NOTE: Professional installation required! The shaft requires being pressed into the oil pump's inner rotor.
Show More Show Less
This is the oil level sensor / sender for BMW E9X E53 E65 E70 E71 E82 E83 When this part fails it will illuminate a check light on the dash which indicates it needs to be replaced. Includes o-ring.
This is the oil level sensor / sender for BMW E9X E53 E65 E70 E71 E82 E83 When this part fails it will illuminate a check light on the dash which indicates it needs to be replaced. Includes o-ring and mounting nuts.
Show More Show Less
This oil dipstick guide tube is the updated part designed to reduce the potential for clogging. We recommend replacing this item with the Crankcase oil separator valve repair kit as it is often plugged from oil sludge. This fits E53 X5 3.0i
This item fits the following BMWs: 2000-2006 E53 BMW X5 3.0i Show More Show Less
