BMW Maintenance & Tune-Up Parts for BMW 6 Series E63 (2004-2010)

This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.

Genuine BMW Screw Plug
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16

K&N's drop-in air intake filter is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance drop-in intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase! 

K&N's drop in air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

• Covered by the K&N Million Mile Limited Warranty
• Washable and reusable
• Emissions legal in all 50 states
• Will not void vehicle warranty

This filter fits the RIGHT SIDE intake airbox on all E60 M5 and E63 M6 (and E64 M6 convertible). Be sure to also get the left side filter, part# 33-2352.

K&N's drop-in air intake filter is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance drop-in intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase! 

K&N's drop in air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

• Covered by the K&N Million Mile Limited Warranty
• Washable and reusable
• Emissions legal in all 50 states
• Will not void vehicle warranty

This filter fits the LEFT SIDE intake airbox on all E60 M5 and E63 M6 (and E64 M6 convertible). Be sure to also get the right side filter, part# 33-2350.

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

Features:

• Consistent filtering across entire filter surface
• Superior ASTMF316 filtration performance
• Magnetic Prefiltering
• Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
• Easy inspection of engine contamination
• Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

Watch to learn how to clean a K&P oil filter

This part fits the following BMWs:
2006 - 2010 E60 M5 Sedan
2006 - 2010 E63 M6 Coupe & Convertible
2008 - 2013 E90 M3 Sedan
2008 - 2013 E92 M3 Coupe
2008 - 2013 E93 M3 Convertible

This 0W-40 engine oil is ideal for BMW vehicles, offering swift flow throughout the engine for quick starts and enhanced wear protection. Its ester base lubricates engine components with precision, reducing wear and tear, while its detergents and dispersants effectively cleanse deposits, holding them until the next oil change. Specifically formulated for modern road cars and light trucks, it meets the specifications of most late-model BMW models and is also suitable for VW/Audi 500.00,502.00, 503.01, 505.00. Recommended for API SN/SM/SL/CF and ACEA A3/B3/B4 standards, this oil ensures top-notch performance and longevity for your BMW's engine.

• Swift flow for fast starts and wear protection
• Ester base reduces engine wear
• Cleanses deposits effectively
• Suitable for modern road cars and light trucks
• Meets specifications for late-model BMW models
• Compatible with VW/Audi 500.00,502.00, 503.01, 505.00
• Recommended for API SN/SM/SL/CF and ACEA A3/B3/B4 standards

All sets of 12 now 10% off regular price!

Redline lubricants are designed for modern German gasoline and diesel engines, with high detergency allowing for extended service intervals called out in your vehicle owner's manual. Unlike many other motor oils, it include the proper anti-wear additives and a low ash content, so it's compatible with the emissions equipment of modern diesel engines. It offers great wear protection, superior efficiency, and reduced friction for today's engines. This is ideal for cold weather applications where 5W30 is recommended.

Conforms to BMW LL-01 standards.

Clickhere for SI-1 Tech Info

Keep your BMW's cooling system in top condition with DEI's Radiator Relief™ Cooling System Flush. This concentrated cleansing agent effectively removes rust and mineral deposits from the radiator core and hose lines, restoring efficiency. Additionally, it dissolves oily residue build-up left by old antifreeze and coolant mixtures, ensuring optimal performance. Simple to use and 100% biodegradable, this flush is recommended for use with distilled water to maintain optimum efficiency. Note that it is intended for a complete coolant flush and should not be added to existing coolant.

Benefits:

• Removes rust deposits from radiator core and hose lines
• Dissolves oily residue for improved performance
• Restores cooling system efficiency
• Simple to use
• 100% biodegradable