Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

E64 Brake Tools

Servicing your own brakes is simple, but can be made impossible without all the proper tools to perform the job yourself. Bleeding tools, fluid extractors, line stopper sets, trusty Ball Peen hammers, and more are all on this page for your confident brake service. Completing the job with everything you need ahead of time makes for a painless brake service or upgrade that can be done from the comfort of your own garage or trackside with our recommended service tools.
You're currently viewing parts for your (E64) 6-Series Convertible 2004-2010. Reset your chassis
For accurate results, specify your model below.
Schwaben Brake Caliper Piston Tool Kit

Schwaben's 11 piece Brake Caliper Piston Tool Set allows you to easily compress your brake calipers. This tool is especially helpful when your car has threaded pistons and a c-clamp simply won't cut it.

Includes:

  • Right-hand thread screw jack
  • Press plate
  • 9 different diameter press disks to fit a wide variety of vehicles
  • Constructed from 100% chromalloy steel
Schwaben
Part #: PBK-11PCS
Price: $39.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben 36oz Dead Blow Hammer The 36 oz dead blow hammer is built with steel shot internals that delivers a stronger force of impact and prevents rebound. The hammer itself is all built from a high-impact poly jacket that encases the head and handle. This hammer allows you to hammer softer metals, such as aluminum, without damaging the surface or the part itself. The handle has a diamond-shaped grip pattern to prevent your hands from slipping and sliding, even with your hands are covered with oil.
Schwaben
Part #: 016805SCH04A
Price: $14.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben 16oz Ball Peen Hammer The 16oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.
Schwaben
Part #: 016805SCH03A
Price: $10.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben 8oz Ball Peen Hammer The 8oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.
Schwaben
Part #: 016805SCH02A
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Mini Tubing Cutter

This great little tubing cutter is a must have in tight work spaces. Large adjusting knob for easier adjustment. This tool only needs 1-1/4" of space around tube.

Features:

  • Handles tubing from 3-16mm (1/8"-5/8") O.D.
  • For copper, aluminum, brass and most thin wall steel.
  • Grooved rollers allow flared tube to be cut directly below the flare.
Schwaben
Part #: 006644SCH01A
Price: $6.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Turner Motorsport Brake Bleeder Bottle The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools. It works great with our Power Brake Bleeder
Turner Motorsport
Part #: TMS1196
Price: $16.49 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Schwaben 3-Liter European Pressure Brake Bleeder

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

 

Features:

  • Holds a full 3-Liters ( 3.17 qts) of brake fluid
  • Easy to read 0-30 lbs pressure gauge built into the tank top
  • Pressure relief valve for safe release of pressure
  • 40" hose with detachable swivel fitting
  • Do not  exceed 20 PSI
  • One-year warranty
Schwaben
Part #: 007237SCH01A
Price: $49.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben 3-Liter Multi-functional Fluid Pump Kit

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

  • Includes 8 special adapters for most transmissions and other fluid filling needs. Adapters all feature quick disconnect with supplied fluid hose. 
  • Comes with popular European M45 screw on master cylinder cap adapter and a universal brake bleeding cap for most other systems.
  • ​This is the most complete kit around for the price and it carries a one-year warranty.
  • Holds a full 3-Liters ( 3.17 qts) of brake fluid
  • Easy to read 0-30 lbs pressure gauge built into the tank top
  • Pressure relief valve for safe release of pressure
  • 40" hose with detachable swivel fitting
  • Do not  exceed 20 PSI

Note: When using for multiple fluids, you must flush tank, hose and pump between use.

Schwaben
Part #: 007311SCH01A
Price: $79.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Metric Bubble Flaring Tool Set

When replacing old corroded brake lines this is a must have tool to get the job done right. Create a bubble flare to match the connection style is an important part of creating the proper seal. Don't forget your tube cutter.

 

Features:

  • Creates the ISO bubble flare found on European, Japanese and some domestic model brake lines.
  • Includes hardened steel bar and adapters for 4.75mm,6mm,8mm and 10mm tubing.
  • Durable blow molded case for easy transport and organization

 

 

Schwaben
Part #: 006394SCH01A
Price: $49.96 (USD) 
$79.95 (Sale - Save 38%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Locking Hose Pinch-Off Pliers Pliers have adequate clamping force to seal large or pressurized cooling system hoses. These pliers are great for clamping shut most hoses. Swivel jaws ensure even clamping force. 
Schwaben
Part #: 009787SCH01A
Price: $18.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Black Mechanics Work Gloves - XXL

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Schwaben
Part #: 010337SCH04A
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Screwdriver Set 6 Pcs.

Looking for a simple but effective professional grade set of screw drivers? Schwaben has released this "slimmed down" kit that gives your the most commonly used flat head and phillips head screw drivers all in one kit. In addition they are even color coded on their Ergo-Soft grip handles to quickly and easily determine which type you grabbing.

These durable nickel chrome moly screw drivers are built to withstand a long life of abuse and keep going without wearing out  like many cheap alternatives.

This essential kit includes:

  • 5.5x100mm flat head screwdriver

  • 6.5x150mm flat head screwdriver

  • 8x175mm flat head screwdriver

  • #1x75mm Phillips screwdriver

  • #2x100mm Phillips screwdriver

  • #3x150mm Phillips screwdriver

Comes in a injection molder tray for easy organization and portability.

Schwaben
Part #: 023436SCH01A
Price: $19.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben 3-Liter Premium European Brake Bleeder

This Premium European Brake bleeder features a Heavy-Duty aluminum master cylinder cap adapter for extra long life. Complete with the Schwaben quick couple fitting that can be used on most European cars.

Holds a full 3-Liters ( 3.17 qts) of brake fluid. Easy to read 0-30 lbs pressure gauge built into the tank top. The filling cap features a pressure relief valve for safe release of pressure. A full 40" hose with detachable swivel fitting at tank, allowing for complete disassembly and quick easy cleanup.There is a quality chrome quick coupler on master cylinder end of hose that snaps into master cylinder cap. This feature will allow you to disconnect hose from screw on cap without spilling a drop of fluid.  Recommended  working pressure of 10 PSI.

Extra plastic cap also included.

Schwaben
Part #: 007237sch01aktKT
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Motive Power Brake Bleeder Tool (Fits most European Cars) The best way how to bleed the brakes on a BMW for the do it yourself BMW owner!

The Motive Products POWER BLEEDER is the number 1 selling DIY pressure brake bleeder. It operates just like the professional mechanics' tool at a fraction of the price. The bleeder works by attaching to your brake fluid resevoir and pressurzing your brake system as well as supplying more fluid as needed. It essentially simulate the old fashioned "2 man" brake bleeding technique, only without the need for a second person. Not sure how easy it is? Watch the video to the right and see how simple it is!
Video: How To Bleed BMW Brakes


The Motive Brake Bleeder works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche, Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm threaded hydraulic fluid reservoir caps All bleeders come with a full 1 year warranty. 2 Quart Capacity. Don't be fooled by cheap imitations!

Choose from either the standard bleeder or premium Black Label Bleeder.
Standard Bleeder - has a plastic reservoir cap and non-swivel fitting.
Black Label Bleeder - comes with custom machined aluminum cap and deluxe swivel fitting, an extra length of high grade polyurethane tubing that won't cloud or crack with exposure to brake fluid.

This brake bleeder fits the following automobiles:
BMW, Audi, Alfa Romeo, Fiat, Mercedes Benz, Peugeot, Porsche, Renault, Saab, Volkswagon, & Volvo.
Motive
Part #: MOT-0100x
Price: $53.95 (USD) 
Ships in 9 days
Free Shipping Free Shipping
on orders $99 and up
Schwaben Black Mechanics Work Gloves - Large

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Schwaben
Part #: 010337SCH02A
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Low Profile 2 Ton Aluminum Floor Jack With Aluminum 3-Ton Jack Stands

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

  • Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
  • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
  • Wide track front wheels help provide chassis torsion control and durability.
  • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
  • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
  • Side mounted handles for carrying and easy positioning.
  • Overload and bypass safety valve prevents jack overload and over extension.
  • Two piece quick release padded handle for storage or transport.

Details:

  • Jack Capacity 2 Ton
  • Max Lift Height 20"
  • Low Height 3.25"
  • Chassis Length 26.5"
  • Overall Width 13"
  • Saddle Diameter 4.5"
  • Handle Lenght 50"
  • Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Schwaben
Part #: 011362sch01aKT
Price: $355.90 (USD) 
In Stock
Quantity:   
Schwaben Universal Adapter Kit For Brake Bleeding This adapter is for use with the 3-Liter Multi-Functional Fluid Pump Kit  and  3-Liter European Pressure Brake Bleeder  only and allow for fitment on other brake fluid reservoir fitment. 
Schwaben
Part #: 007311SCH04A
Price: $19.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Low Profile 2 Ton Aluminum Floor Jack With 12

 A complete set offered to ensure that the proper lifting techniques are at use. It's never wise to work under a vehicle supported by only a floor jack, with this complete kit you get a complete matching set to get the job done safe and fast.

  • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
  • Wide track front wheels help provide chassis torsion control and durability.
  • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
  • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
  • Side mounted handles for carrying and easy positioning.
  • Overload and bypass safety valve prevents jack overload and over extension.
  • Two piece quick release padded handle for storage or transport.
  • Dual piston's for 5 pump full extension

Details:

  • Jack Capacity 2 Ton
  • Max Lift Height 20"
  • Low Height 3.25"
  • Chassis Length 26.5"
  • Overall Width 13"
  • Saddle Diameter 4.5"
  • Handle Lenght 50"
  • Shipping Weight 50 lbs

Schwaben 12" wheel Stands:

These stands are made from special EPS foam with an anti-skid coating.

Won't scratch or mark your floors!

Lightweight at only 5 lbs each, makes these stands easy to carry and maneuver.

Works on virtually any surface, including sand!

Will not scoot, slip or slide, no matter the surface.

Specs:

12" tall,15.75" long,12" wide.

Works on wheel diameters from 25 to 30 inches.

Schwaben
Part #: 011362sch01aKT1
Price: $390.95 (USD) 
In Stock
Quantity:   
Schwaben 6

Ensure you are getting the most accurate measurements you can with the Schwaben 6" Carbon Fiber Composite Digital Caliper. Machined components and things like shims and bearings all require very exact sizes for proper clearance and fitment. With this caliper, you can check these component's measurements quickly and accurately, down to .0005in/.01mm graduations. 

Specifications:

  • Carbon Fiber Composite Digital Caliper made from a milled carbon fiber / plastic mix
  •  Digital display with inch, metric and fractional read out 
  •  Push button conversion 
  •  4 measurements - inside, outside, depth and step 
  •  Large LCD Panel 
  •  6"/150mm range 
  •  .0005"/.01mm/1/64" resolution 
  • Powered by (1) SR44/357 Battery (included)
Schwaben
Part #: 019711SCH01A
Price: $13.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben 8 Piece Fluid Line Stopper Kit

When pulling brake lines, Vanos, transmission, or lines of a similar type they end up leaking all over the place, Many cases hose clamps may end up weakening the exterior of the rubber hose. The fluid line stoppers are able to put a plug on the end of the line so the work can be done with as little mess as possible.

 

Features:

  • Kit contains 2 of each size Shark type clamps designed to make a temporary seal on the end of an open line
  •  Includes clamps with 5/16",3/8" and 1/2" open slot
  • double seal clamps for banjo style fittings

 

 

Schwaben
Part #: 005939SCH01A
Price: $39.95 (USD) 
Ships on Jun 21, 2018
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Black Mechanics Work Gloves - Medium

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material

 

Schwaben
Part #: 010337SCH01A
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben 11mm Brake Bleeder Wrench Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.
Schwaben
Part #: 000550SCH01A
Price: $19.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Compact European Pressure Brake Bleeder

Need to bleed your brakes in the near future? This Compact European Pressure Brake Bleeder is perfect for the job and has many features that makes the job significantly easier. It has all of the features of the Schwaben full sized brake bleeder kit.

Features:

  • 45 mm euro master cylinder adapter.
  • Hand held pump with 30 psi gauge .
  • 36" long hose on pump to bottle.
  • 22" long hose from bottle to master cylinder cap adapter.
  • Convenient hook on fluid bottle allows bottle to hang above master cylinder, out of the way.
  • Bottle has a pressure relief valve.
  • Includes 12" waste oil tube for bleeder.
  • 400cc Container
Schwaben
Part #: 018222SCH01A
Price: $27.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben 6

Ensure you are getting the most accurate measurements you can with the Schwaben 6" Stainless Steel Digital Caliper. Machined components and things like shims and bearings all require very exact sizes for proper clearance and fitment. With this caliper, you can check these component's measurements quickly and accurately, down to .001in/.01mm graduations. 

Specifications:

  • 0-6" (0-150mm) range, .001" (.01mm) graduations
  • Easy-to-read digital display with SAE/Metric conversion
  • 4 measurements - inside, outside, depth, and step
  • Stainless steel with satin chrome finish
  • Measuring surfaces are precision ground and lapped
  • Powered by (1) SR44/357 battery (Included)
Schwaben
Part #: 019732SCH01A
Price: $26.95 (USD) 
$29.95 (10% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Pocket Brake Fluid Tester

It is necessary to check the moisture content of your brake flluid beacuse brake fluid is hygroscopic, meaning it readily absorbs moisture. Over a period of time moisture will cause brake fluid to degrade. Once brake fluid reaches a certain level the brake fluid is no longer able to function properly in the brake hydraulic systems. 

This Schwaben Brake fluid tester has a green, yellow and red light that represent's moisture content of DOT 4 brake fluid to determine if service is needed.

Features:

  • Green LED, H2O level is <1.5% = OK
  • Yellow LED, H2O level is 1.5 to 3% =Replace soon
  • Red Led, H2O level is >3% Replace Immediately
  • Auto-off function
  • Bright Led Flashlight 
  • One AAA battery operation- not included

 

Schwaben
Part #: 015745SCH01A
Price: $25.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Caliper Piston Compressor Tool

A simple design that makes compressing the caliper piston back in a breeze. The days of balancing the piston while turning a C-clamp are over.

Note: Not designed for use with screw-in type brake pistons.

Schwaben
Part #: scwbk-510
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben 3pc Professional Hammer Set

Every now and then you just need a hammer to get the job done. Ensure that your hammers are high enough quality to stand up to the demands of the job!

Included in this set:

  • 8-oz Ball Peen Hammer 
  • 16-oz Ball Peen Hammer 
  • 36-oz Dead Blow Hammer

The 8 and 16 oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.

The 36 oz dead blow hammer is built with steel shot internals that delivers a stronger force of impact and prevents rebound. The hammer itself is all built from a high-impact poly jacket that encases the head and handle. This hammer allows you to hammer softer metals, such as aluminum, without damaging the surface or the part itself. The handle has a diamond-shaped grip pattern to prevent your hands from slipping and sliding, even with your hands are covered with oil.

Schwaben
Part #: 016805sch01aKT
Price: $29.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben Black Mechanics Work Gloves - XL

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Schwaben
Part #: 010337SCH03A
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Tool - 7mm Hex/Allen Socket Most BMWs have a 7mm female hex bolt for their caliper guide bolt (what the caliper slides in and out on). And most common hex / Allen socket sets include a 7mm. But one problem you may find yourself in is that the rear shock interferes with the rear caliper guide bolts. Most off-the-shelf sockets are too long overall to fit in between the shock body and where the guide bolt is. This 'stubby' 7mm Allen is the perfect solution. It takes a 3/8 drive and stands 32mm tall (a comparable Craftsman is over 45mm). The Allen section itself is 13mm which allows it to fully engage the guide bolt and leave the minimum amount hanging outside for your ratchet.

Since the 7mm caliper guide bolt is used on almost all BMWs built since 1982, this tool will prove to be extremely useful to any DIYer. 7mm caliper socket applies to the following BMW models:
E24, E28, E30, E31, E32, E34, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E70, E71, E82, E83, E85, E86, E89, E90, E91, E92, E93, F01, F02, F07, F10, F12, F13, Z3, MINI R50, MINI R52, MINI R53
Assenmacher Specialty Tools
Part #: TMS24985
Price: $23.00 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Lisle
Part #: LIS24400
Price: $8.09 (USD) 
In Stock
Quantity:   
Turner Motorsport Brake Bleeder Bottle with Check Valve - Simple Bleed This is the new evolution of our popular Brake Bleeder Bottle. The latest design features a one-way check valve inside the bottle that is operated when you pump the brakes. This is a more economical and simpler system than other "1 man bleeding" kits - no modification to your brake system and you only have to buy the one bottle. The newest bottles also include upgraded caps and fittings for a tighter seal.

The one-way check valve is extremely simple to use - attach the bottle and hose, open your bleed screw, and pump your brakes from the pedal. The check valve opens with each pump to let fluid and air out of the system and then seals tight when the pedal is released. The bottle uses a large magnet to conveniently stick to your brake disc while you run the hose to the caliper.

Works on just about all brake systems so no need to have specialized adapters or bleed screws.
Turner Motorsport
Part #: BBMCV
Price: $21.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook