BMW 1 Series E82 (2008-2013)

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

10X Entries Into Our F80 M3 Sweepstakes

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

BMW 50 Years M License Plate Frame

T#:13990874

Part#: 82115A75DA6

In Stock

Sale - Save 8% $ 52.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.90 USD

Add to Wish List

Qty

Sale - Save 8%

$ 52.99

This product was last offered at the strikethrough price on
08-26-2026

$ 48.90 USD

Add to Wish List

This stylish and attractive license plate frame is the perfect addition to your BMW.

18x10.5" ET22 Brushed Clear APEX VS-5RS Forged BMW Wheel

2X Entries Into Our F80 M3 Sweepstakes

T#:4607237

Part#: VS5RS18105ET22BC

Ships in 5 Business Days

Sale - Save 10% $ 799.00

This product was last offered at the strikethrough price on
08-31-2026

$ 719.10 USD

Add to Wish List

Qty

Sale - Save 10%

$ 799.00

This product was last offered at the strikethrough price on
08-31-2026

$ 719.10 USD

Add to Wish List

18x9.5" ET35 Satin Black APEX VS-5RS Forged BMW Wheel

2X Entries Into Our F80 M3 Sweepstakes

T#:4607225

Part#: VS5RS1895ET35SMB

Ships in 5 Business Days

Sale - Save 10% $ 739.00

This product was last offered at the strikethrough price on
08-31-2026

$ 665.10 USD

Add to Wish List

Qty

Sale - Save 10%

$ 739.00

This product was last offered at the strikethrough price on
08-31-2026

$ 665.10 USD

Add to Wish List

E82 135i N55 Build Your Own Maintenance Service Package

10X Entries Into Our F80 M3 Sweepstakes

T#:338794

Part#: TMS213604

In Stock

Sale - Save 9% $ 125.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 114.58 USD

Add to Wish List

Sale - Save 9%

$ 125.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 114.58 USD

Add to Wish List

Don't buy into the hype that your car is maintenace-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service , and unbeatable expertise .

5,000 Mile Oil Service

(click to expand)

engine oil change with filter, using OE BMW 5W30 or Motul
replace drain bolt crush washer
reset oil service/maintenance indicator
inspect and top off any other fluids

Annual Service

(click to expand)

air filter cleaning or replacement
MAF/airflow sensor cleaning
A/C microfilter/cabin filter replacement
brake fluid flush/bleeding
top off power steering fluid (make sure you use the correct Pentosin fluid!)
wiper blade replacement
lubricate door hinges and treat rubber door seals
inspect spare tire or tire repair kit, and tire-changing tools
inspect drive belt for cracking or stretching
inspect intake boots and vacuum lines for cracks
inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
inspect bushing and ball joints for excess play/movement
ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)

40,000 Mile Major Service

(click to expand)

spark plug replacement
ignition coil and coil boot inspection and replacement
inspect spark plug cavity in valve cover for leaking valve cover gasket
engine oil change with filter, using OE BMW 5W30 or Motul
reset oil service/maintenance indicator
air filter replacement or cleaning for aFe/K&N type
fill and bleed cooling system
manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
differential fluid change, using Red Line 75/90 or Motul Gear300
brake fluid flush/bleeding
serpentine belt replacement
inspect belt roller pulleys (drag and rotation) and belt tensioners
complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
complete brake system test and inspection
engine and transmission leak detection and diagnosis
shifter linkage, driveshaft guibo, CV, and center support bearing inspection
exhast system inspection, including hanger replacement

80,000 Mile Major Service

(click to expand)

spark plug replacement
ignition coil and coil boot inspection and replacement
inspect spark plug cavity in valve cover for leaking valve cover gasket
engine oil change with filter, using OE BMW 5W30 or Motul
reset oil service/maintenance indicator
air filter replacement or cleaning for aFe/K&N type
fill and bleed cooling system
manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
differential fluid change, using Red Line 75/90 or Motul Gear300
brake fluid flush/bleeding
fuel filter, pressure regulator replacement
serpentine belt replacement
replace belt roller pulleys and belt tensioners
complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
complete brake system test and inspection
engine and transmission leak detection and diagnosis
shifter linkage, driveshaft guibo, CV, and center support bearing inspection
exhast system inspection, including hanger replacement
water pump and thermostat inspection or replacement. The water pump on this car is electric and will not display warning signs of impending failure. The output of the water pump can be tested however, and your local full-service BMW repair shop should have the diagnostic tools to perform this test.

You may also want to pick up these other helpful items:

E90 Bentley Service Manual (not specific to the 1-series but still very helpful)

We offer many DIY-related tools, specifically for the 135i owner -
drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!

SprintBooster throttle enhancement
This package fits the following BMWs:
2011-2012 E82 BMW 135i
2011-2012 E88 BMW 135i Convertible

Put a check in the boxes next to the items you wish to order.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

T#:403279

Part#: FILPFPK3

Back Ordered

Starting at $ 1,154.83 USD

Add to Wish List

Starting at $ 1,154.83 USD

Add to Wish List

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788360

Part#: ML1018930120KT

Ships in 5 Business Days

Sale - Save 10% $ 2,936.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,642.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,936.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,642.40 USD

Add to Wish List

APEX ML-10RT 18" Forged Wheels - Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31755220

Part#: ML10181025120GKT

Ships in 5 Business Days

Sale - Save 10% $ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

Motorsport Gold paint with Machined lip 18"x10 Set

Fuel-It! Low Pressure Fuel Pump Upgrade Bucketless - N54/55 E-Series ...

T#:403280

Part#: FILPFPK4

Ships in 2 Business Days

Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD

Add to Wish List

Sale - Save 3%

$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD

Add to Wish List

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol.

The Stage 2 bucketless kit includes the following:

- A custom anodized billet fitting for the pump output and stock fuel line connection.
- Our custom billet aluminum anodized bracket for the pump and float assembly
- Two cotter pins to secure your float assembly
- A new E85 compatible Walbro 450 pump
- Spare vent tube clip
- A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

- A complete plug and play solution by simply adding the secondary module
- Our custom billet aluminum fitting to run both pumps in parallel
- A new E85 compatible Walbro 450 pump
- Wiring harness for the secondary pump
- Spare vent tube clip
- A new Walbro filter

Recommended accessories:
- Lock Ring Removal Tool
- Hobb's switch
NOTE: These kits include a basic filter assembly. When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump. In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns. Again for those applications we'd recommend one of our standard pump applications.

Show More Show Less

19" APEX VS-5RS Staggered Wheel Set - Choose Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19560877

Part#: VS5RS199H10

Ships in 5 Business Days

Sale - Save 10% $ 3,510.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,159.00 USD

Add to Wish List

Sale - Save 10%

$ 3,510.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,159.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 19x9" ET30 19x10" ET25 APEX VS-5RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N54/55 E-Series ...

T#:403273

Part#: FILPFPK2

Back Ordered

Sale - Save 2% $ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

Sale - Save 2%

$ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788333

Part#: ML10181040120AKT

Back Ordered

Sale - Save 10% $ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels (9"/10") Staggered Set Of Four - Gloss...

2X Entries Into Our F80 M3 Sweepstakes

T#:31788329

Part#: ML10181040120GKT

In Stock

Sale - Save 10% $ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

x2 ML-10RT Forged Wheel (18x9 ET30 5x120 72.56CB) - Machined Lip Gloss Motorsport Gold
x2 ML-10RT Forged Wheel (18x10 ET40 5x120 72.56CB) - Machined Lip Gloss Motorsport Gold

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788321

Part#: ML1018952120AKT1

Ships in 5 Business Days

Sale - Save 10% $ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788312

Part#: ML1018930120RKT1

Ships in 5 Business Days

Sale - Save 10% $ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

18" APEX VS-5RS Staggered Forged Wheel Set - Pick Your Finish ...

2X Entries Into Our F80 M3 Sweepstakes

T#:20287722

Part#: VS5RS18910D

Ships in 5 Business Days

Sale - Save 10% $ 3,396.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,056.40 USD

Add to Wish List

Sale - Save 10%

$ 3,396.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,056.40 USD

Add to Wish List

Apex VS-5RS 18x9" ET30/31 18x10" ET25 Wheel Set These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" APEX VS-5RS Staggered Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:20287707

Part#: VS5RS1995105D

Ships in 5 Business Days

Sale - Save 10% $ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,696.40 USD

Add to Wish List

Sale - Save 10%

$ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,696.40 USD

Add to Wish List

The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel. VS-5RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track!

Show More Show Less

18" APEX VS5RS Staggered Forged Wheel Set, 18x11" ET25, 18x11" ET25 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:20584659

Part#: VS5RS181011ST2

Ships in 5 Business Days

Sale - Save 10% $ 3,036.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,732.40 USD

Add to Wish List

Sale - Save 10%

$ 3,036.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,732.40 USD

Add to Wish List

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

VS-5RS Forged Wheels - Staggered Set - Choose Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19593911

Part#: VS5RS1895T22

Ships in 5 Business Days

Sale - Save 10% $ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,696.40 USD

Add to Wish List

Sale - Save 10%

$ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,696.40 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 18x9.5" ET22 18x10.5" ET22 APEX VS-5RS Forged BMW Wheel On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

18" APEX ML-10RT Forged Wheels - Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31755219

Part#: ML10181025120RKT

Ships in 5 Business Days

Sale - Save 10% $ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788314

Part#: ML1018930120AKT1

Ships in 5 Business Days

Sale - Save 10% $ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

18" APEX VS-5RE Square Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40478181

Part#: VS5RE181025

Ships in 5 Business Days

Sale - Save 10% $ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,696.40 USD

Add to Wish List

Sale - Save 10%

$ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,696.40 USD

Add to Wish List

Apex VS-5RE 18x10" ET25 Square Wheel Set The VS-5RE is the forged Enduro version of our popular VS-5 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Sharing a similar split five spoke layout to our popular Sprint Line VS-5RS, the all new VS-5RE was designed to prioritize both strength and stiffness. The reality is that most enthusiasts and racers benefit far more from increased strength than they would from a small decrease in weight. The VS-5RE and the Enduro line as a whole was introduced to give the enthusiast community the choice to choose what's best for their application. In our pursuit of absolute strength, the Forged VS-5RE was given dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a substantially reinforced outer lip. When all put together, the VS-5RE is rated at an impressive 2100 lb max load. A major increase over its Sprint Line counterpart sitting at a 1600 lb load rating. To achieve this level of strength, our engineers added a considerable amount of material to the areas where it matters most. This does come with a bit of a weight penalty, however a host of weight saving measures have been implemented to minimize its effect. Deep spoke scalloping is utilized to shave material from the sides of spokes without compromising strength. Outer lip pocketing, a feature only seen on the Enduro Line within the Apex catalog, does away with excess material on the outer lip between each spoke. Our aim is for the Enduro VS-5RE to become the wheel of choice for anyone who appreciates the benefit of strength and stiffness over small weight savings. One must ask themselves how much faster will they truly be by dropping a few pounds of rotating mass and is it worth the trade off of losing confidence that your wheels will hold up lap after lap. Wheels lacking in stiffness flex under load, leading to lost camber during demanding cornering. Ultra lightweight wheels look great on paper, but they could cost you in the form of a lost podium or high cost of replacement. Whether you’re a hardcore racer or an enthusiast who appreciates great engineering, the VS-5RE is the answer.

Show More Show Less

18" APEX VS-5RE Staggered Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40478185

Part#: VS5RE181011

Ships in 5 Business Days

Sale - Save 10% $ 3,036.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,732.40 USD

Add to Wish List

Sale - Save 10%

$ 3,036.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,732.40 USD

Add to Wish List

Apex VS-5RE 18x10" ET25 & 18x11" ET25 Staggered Wheel Set The VS-5RE is the forged Enduro version of our popular VS-5 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Sharing a similar split five spoke layout to our popular Sprint Line VS-5RS, the all new VS-5RE was designed to prioritize both strength and stiffness. The reality is that most enthusiasts and racers benefit far more from increased strength than they would from a small decrease in weight. The VS-5RE and the Enduro line as a whole was introduced to give the enthusiast community the choice to choose what's best for their application. In our pursuit of absolute strength, the Forged VS-5RE was given dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a substantially reinforced outer lip. When all put together, the VS-5RE is rated at an impressive 2100 lb max load. A major increase over its Sprint Line counterpart sitting at a 1600 lb load rating. To achieve this level of strength, our engineers added a considerable amount of material to the areas where it matters most. This does come with a bit of a weight penalty, however a host of weight saving measures have been implemented to minimize its effect. Deep spoke scalloping is utilized to shave material from the sides of spokes without compromising strength. Outer lip pocketing, a feature only seen on the Enduro Line within the Apex catalog, does away with excess material on the outer lip between each spoke. Our aim is for the Enduro VS-5RE to become the wheel of choice for anyone who appreciates the benefit of strength and stiffness over small weight savings. One must ask themselves how much faster will they truly be by dropping a few pounds of rotating mass and is it worth the trade off of losing confidence that your wheels will hold up lap after lap. Wheels lacking in stiffness flex under load, leading to lost camber during demanding cornering. Ultra lightweight wheels look great on paper, but they could cost you in the form of a lost podium or high cost of replacement. Whether you’re a hardcore racer or an enthusiast who appreciates great engineering, the VS-5RE is the answer.

Show More Show Less

Apex ML-10RT18x9.5 ET22 Wheels

2X Entries Into Our F80 M3 Sweepstakes

T#:35492008

Part#: ML10RT1895ET22

Ships in 5 Business Days

Sale - Save 10% $ 738.00

This product was last offered at the strikethrough price on
08-31-2026

$ 664.20 USD

Add to Wish List

Qty

Sale - Save 10%

$ 738.00

This product was last offered at the strikethrough price on
08-31-2026

$ 664.20 USD

Add to Wish List

18x9.5 ET22 5x120mm/ 72.56mm Race Silver

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788362

Part#: ML1018952220AKT1

Ships in 5 Business Days

Sale - Save 10% $ 2,936.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,642.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,936.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,642.40 USD

Add to Wish List

18" APEX VS5RS Square Forged Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19395589

Part#: VS5RS18930SQ

Ships in 5 Business Days

Sale - Save 10% $ 2,916.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,624.40 USD

Add to Wish List

Sale - Save 10%

$ 2,916.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,624.40 USD

Add to Wish List

Apex ARC8 18x9" ET30 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Square Setup 18x9" ET30 APEX VS-5RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788318

Part#: ML1018952120RKT1

Ships in 5 Business Days

Sale - Save 10% $ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788345

Part#: ML10189558120GKT

Back Ordered

Sale - Save 10% $ 2,916.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,624.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,916.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,624.40 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31755237

Part#: ML10189522120RKT

Back Ordered

Sale - Save 10% $ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

19" APEX VS-5RS Square Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19825271

Part#: VS5RS19930

Ships in 5 Business Days

Sale - Save 10% $ 3,476.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,128.40 USD

Add to Wish List

Sale - Save 10%

$ 3,476.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,128.40 USD

Add to Wish List

19x9" ET28 Square Forged Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever! Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788315

Part#: ML1018952120GKT1

Ships in 5 Business Days

Sale - Save 10% $ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

Apex ML-10RT 18x11 ET44 5x120mm 72.56mm in Race Silver

2X Entries Into Our F80 M3 Sweepstakes

T#:35492004

Part#: ML10RT1811ET44

Ships in 5 Business Days

Sale - Save 10% $ 769.00

This product was last offered at the strikethrough price on
08-31-2026

$ 692.10 USD

Add to Wish List

Qty

Sale - Save 10%

$ 769.00

This product was last offered at the strikethrough price on
08-31-2026

$ 692.10 USD

Add to Wish List

The Forged ML-10RT is the answer for enthusiasts craving a wheel design that combines classic motorsport styling with modern monoblock forging technology. This wheel was initially developed in the shadows by one of our Senior Engineers exclusively for his BMW E46 M3 widebody race car, and after sharing photos of the prototypes on social media, we received an overwhelming amount of interest from the community to bring it to market. Just like our existing flagship motorsport designs, the ML-10RT was designed from the ground up by our team of in-house engineers and underwent the same extensive FEA analysis and third party testing. It’s made from the highest grade 10K ton forged 6061-T6 aluminum, and utilizes true motorsport blanks, which is a vital component in our ability to deliver vehicle-specific optimizations like maximum concavity, optimal spoke design and critical brake clearance. The end result is a perfect blend of weight savings, added stiffness and strength, all while staying true to the classic motorsport design language we all love. The ML-10RT also sports our reinforced Sprint Spec inner lip and a 1600lb (1650lb for Porsche applications) load rating, which is the same lip design and load ratings we use for our popular Forged Sprint Line.

Show More Show Less

19" APEX VS5RS Square Forged Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:20584664

Part#: VS5RS1910SQ

Ships in 2 Business Days

Sale - Save 10% $ 3,556.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,200.40 USD

Add to Wish List

Sale - Save 10%

$ 3,556.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,200.40 USD

Add to Wish List

19x10 ET25 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" APEX VS-5RS Square Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:19858311

Part#: VS5RS199528

Ships in 5 Business Days

Sale - Save 10% $ 3,516.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,164.40 USD

Add to Wish List

Sale - Save 10%

$ 3,516.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,164.40 USD

Add to Wish List

19x9.5 ET28 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788361

Part#: ML10189522120KT

Ships in 5 Business Days

Sale - Save 10% $ 2,936.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,642.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,936.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,642.40 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31755218

Part#: ML10181025120AKT

Ships in 5 Business Days

Sale - Save 10% $ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,996.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,696.40 USD

Add to Wish List

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788310

Part#: ML1018930120GKT1

Ships in 5 Business Days

Sale - Save 10% $ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

18" APEX VS-5RS Square Wheel Set - Pick Your Finish

2X Entries Into Our F80 M3 Sweepstakes

T#:20518645

Part#: VS5RS189528

Ships in 5 Business Days

Sale - Save 10% $ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,660.40 USD

Add to Wish List

Sale - Save 10%

$ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,660.40 USD

Add to Wish List

18x9.5 ET28 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

18" APEX ML-10RT Forged Wheels - Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31755238

Part#: ML10189522120GKT

Ships in 5 Business Days

Sale - Save 10% $ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

19" VS-5RS Forged Wheels - Staggered Set - Choose Your Finish ...

2X Entries Into Our F80 M3 Sweepstakes

T#:19593921

Part#: VS5RS1995105

Ships in 5 Business Days

Sale - Save 10% $ 3,556.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,200.40 USD

Add to Wish List

Sale - Save 10%

$ 3,556.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,200.40 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 19x9.5" ET22 19x10.5" ET25 APEX VS-5RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788347

Part#: ML10189558120RKT

Back Ordered

Sale - Save 30% $ 3,766.99

This product was last offered at the strikethrough price on
08-31-2026

$ 2,624.40 USD

Add to Wish List

Qty

Sale - Save 30%

$ 3,766.99

This product was last offered at the strikethrough price on
08-31-2026

$ 2,624.40 USD

Add to Wish List

18" VS-5RS APEX Square Wheel Set

2X Entries Into Our F80 M3 Sweepstakes

T#:19395616

Part#: VS5RS189522SQ

Back Ordered

Sale - Save 10% $ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,660.40 USD

Add to Wish List

Sale - Save 10%

$ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 2,660.40 USD

Add to Wish List

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31788355

Part#: ML10189558120AKT

Back Ordered

Sale - Save 10% $ 2,916.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,624.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,916.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,624.40 USD

Add to Wish List

17x9.5" ET35 Brushed Clear APEX VS-5RS Forged BMW Wheel

2X Entries Into Our F80 M3 Sweepstakes

T#:18932318

Part#: VS5RS1795ET35BC

Ships in 5 Business Days

Sale - Save 10% $ 709.00

This product was last offered at the strikethrough price on
08-31-2026

$ 638.10 USD

Add to Wish List

Qty

Sale - Save 10%

$ 709.00

This product was last offered at the strikethrough price on
08-31-2026

$ 638.10 USD

Add to Wish List

19" APEX VS-5RE Staggered Wheel Set - Choose Your Finish!

2X Entries Into Our F80 M3 Sweepstakes

T#:40478197

Part#: VS5RE199510

Ships in 5 Business Days

Sale - Save 10% $ 3,536.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,182.40 USD

Add to Wish List

Sale - Save 10%

$ 3,536.00

This product was last offered at the strikethrough price on
08-31-2026

Starting at $ 3,182.40 USD

Add to Wish List

Apex VS-5RE 19x9.5" ET22 & 19x10" ET25 Staggered Wheel Set The VS-5RE is the forged Enduro version of our popular VS-5 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Sharing a similar split five spoke layout to our popular Sprint Line VS-5RS, the all new VS-5RE was designed to prioritize both strength and stiffness. The reality is that most enthusiasts and racers benefit far more from increased strength than they would from a small decrease in weight. The VS-5RE and the Enduro line as a whole was introduced to give the enthusiast community the choice to choose what's best for their application. In our pursuit of absolute strength, the Forged VS-5RE was given dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a substantially reinforced outer lip. When all put together, the VS-5RE is rated at an impressive 2100 lb max load. A major increase over its Sprint Line counterpart sitting at a 1600 lb load rating. To achieve this level of strength, our engineers added a considerable amount of material to the areas where it matters most. This does come with a bit of a weight penalty, however a host of weight saving measures have been implemented to minimize its effect. Deep spoke scalloping is utilized to shave material from the sides of spokes without compromising strength. Outer lip pocketing, a feature only seen on the Enduro Line within the Apex catalog, does away with excess material on the outer lip between each spoke. Our aim is for the Enduro VS-5RE to become the wheel of choice for anyone who appreciates the benefit of strength and stiffness over small weight savings. One must ask themselves how much faster will they truly be by dropping a few pounds of rotating mass and is it worth the trade off of losing confidence that your wheels will hold up lap after lap. Wheels lacking in stiffness flex under load, leading to lost camber during demanding cornering. Ultra lightweight wheels look great on paper, but they could cost you in the form of a lost podium or high cost of replacement. Whether you’re a hardcore racer or an enthusiast who appreciates great engineering, the VS-5RE is the answer.

Show More Show Less

18" APEX ML-10RT Forged Wheels - Set Of Four

2X Entries Into Our F80 M3 Sweepstakes

T#:31755236

Part#: ML10189522120AKT

Back Ordered

Sale - Save 10% $ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,956.00

This product was last offered at the strikethrough price on
08-31-2026

$ 2,660.40 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results