BMW 1 Series E82 (2008-2013)

Manual BMW Shift Knob - ZHP Style Weighted Anatomic - 5 or 6 Speed Pa...

T#:339106

Part#: TMS1844

In Stock

Starting at $ 159.99 USD

Add to Wish List

Starting at $ 159.99 USD

Add to Wish List

This Genuine BMW shift knob is about 3/4" shorter than the "standard" shift knobs and is weighted (5.4oz) to give a better, more substantial, shifter feel for the driver. We love the subtle, yet noticeable improvement this makes in the "feel" of gear changes. It's also identical in size/shape/weight to the shift knob that came on the E46 330 ZHP, and is available in either 5 speed or 6 speed gear shift patterns.

Your choice of shift patterns:
+ 5 Speed ZHP Shift knob: BMW Part # 25117896031 (25-11-7-896-031)
+ 6 Speed ZHP Shift knob: BMW Part # 25117896886 (25-11-7-896-886)

BMW ZHP Shift Knob installed in E36 M3

Perhaps best of all, this shift knob fits ALL 1982 and newer manual transmission BMWs. That's right -- this knob can be used on ALL BMWs, 1982 and later. So no matter what model BMW you have -- E30, E36, E46, E90 or E92 or anything else -- this knob will look, work, and feel GREAT. This knob also looks and works great on all 1 series including 128i and 135i.

Note that many newer models have a 1-piece knob + boot. This is standard on most M cars and on some other BMWs. We sell new replacement boots to use with this shift knob, choose the option below if you would like one included with your order (not for E9X M3 models).

Please choose the shift pattern below:

Show More Show Less

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

Sale - Save 15% $ 129.99

This product was last offered at the strikethrough price on
09-03-2026

$ 110.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 129.99

This product was last offered at the strikethrough price on
09-03-2026

$ 110.49 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

VTT “OBD-LOCK” ODB Port Locking Tool

2X Entries Into Our F80 M3 Sweepstakes
For Vehicles Produced After 1995

T#:26938503

Part#: VTT-OBD-LOCK

In Stock

Sale - Save 15% $ 97.99

This product was last offered at the strikethrough price on
09-03-2026

$ 83.29 USD

Add to Wish List

Qty

Sale - Save 15%

$ 97.99

This product was last offered at the strikethrough price on
09-03-2026

$ 83.29 USD

Add to Wish List

VTT is proud to offer our “OBD-LOCK” OBD port locking tool. This is tool is made from billet 6061-T6 aluminum and is designed to completely lock out your OBD port from being accessed. This is useful for people who do not want dealers, techs, etc from accessing their OBD port, and possibly changing a tune, etc. This is also perfect for anti-theft prevention as it will not allow a would-be thief to hook up to the car’s OBD port, duplicate a key, etc. The OBD-LOCK cannot be removed without physically destroying the OBD port if you do not have the proper tools. VTT uses 5 types of screw head designs for every 200 OBD-LOCKS made. This means that worldwide only 40 OBD-LOCKS are using the same head design. For each batch of 200, we redesign the screw heads meaning every batch of 200 OBD-LOCKS will use different screw heads and tools. Each OBD-LOCK sent has its head design chosen at random. After Extensive testing, we have found that our OBD lock fits EVERY SINGLE OBD port we have tried, this means it will fit every single OBD port currently on the market from a high-end BMW to a Ford F150 diesel.

Show More Show Less

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

2X Entries Into Our F80 M3 Sweepstakes

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

Sale - Save 15% $ 129.99

This product was last offered at the strikethrough price on
09-03-2026

$ 110.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 129.99

This product was last offered at the strikethrough price on
09-03-2026

$ 110.49 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

Engine Rocker Arm - Grade 3

T#:34252

Part#: 11337559794

In Stock

Sale - Save 25% $ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 54.99

This product was last offered at the strikethrough price on
08-26-2026

$ 41.24 USD

Add to Wish List

Genuine BMW Roller Drag Lever - "3"
This item fits the following BMW Chassis:
E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

VTT N54 Crank Bolt Capture - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557938

Part#: VTT-N54-CBC

In Stock

Sale - Save 15% $ 129.99

This product was last offered at the strikethrough price on
09-03-2026

$ 110.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 129.99

This product was last offered at the strikethrough price on
09-03-2026

$ 110.49 USD

Add to Wish List

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice.

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

1x Aluminum Crank Bolt Capture
8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Sale - Save 15% $ 89.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 76.49 USD

Add to Wish List

Sale - Save 15%

$ 89.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 76.49 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

Sale - Save 15% $ 889.99

This product was last offered at the strikethrough price on
09-03-2026

$ 756.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 889.99

This product was last offered at the strikethrough price on
09-03-2026

$ 756.49 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

N54 Billet 90 Degree Coolant Tank Fitting

2X Entries Into Our F80 M3 Sweepstakes

T#:12184492

Part#: VTT-COOLANT-90-1

In Stock

Sale - Save 15% $ 37.99

This product was last offered at the strikethrough price on
09-03-2026

$ 32.29 USD

Add to Wish List

Qty

Sale - Save 15%

$ 37.99

This product was last offered at the strikethrough price on
09-03-2026

$ 32.29 USD

Add to Wish List

Enhance the flexibility of your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting. Ideal for applications such as single turbo setups or forward-facing intake manifolds, this fitting provides extra clearance and versatile hose routing options.

Key Benefits:

Allows hose to run straight down, increasing clearance
Made of durable 6061-T6 aluminum for long-lasting performance
Anodized black finish for enhanced durability and corrosion resistance
Includes fitting and clamp for easy installation

Upgrade your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting for improved performance and versatility.

Show More Show Less

Power Steering Fluid CHF 11S - 1 Liter

T#:510532

Part#: 83290429576

In Stock

Sale - Save 8% $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.56 USD

Add to Wish List

Qty

Sale - Save 8%

$ 58.99

This product was last offered at the strikethrough price on
08-26-2026

$ 54.56 USD

Add to Wish List

Pentosin CHF 11S hydraulic oil is a specially designed synthetic oil crafted for various vehicle hydraulic systems. It serves power steering, level control, hydraulic suspension, and shock absorbers. With a broad temperature tolerance, it suits both hot and cold climates exceptionally well. Meeting DIN 51 524T3 and ISO 7308 specification standards, this oil ensures quality and performance.

Regular maintenance, including fluid drain, flush, and refill of the steering fluid, removes contaminants and revitalizes fluid additives. This process safeguards against abrasion, chemical attacks, and corrosion, ensuring system longevity and efficiency.

Show More Show Less

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

2X Entries Into Our F80 M3 Sweepstakes

T#:389684

Part#: VTT-N54-PCV

In Stock

Sale - Save 15% $ 68.99

This product was last offered at the strikethrough price on
09-03-2026

$ 58.64 USD

Add to Wish List

Qty

Sale - Save 15%

$ 68.99

This product was last offered at the strikethrough price on
09-03-2026

$ 58.64 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

Genuine BMW Intake Valve - N52 3.0L

T#:34507

Part#: 11347553771

Ships in 2 Business Days

Sale - Save 11% $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.97 USD

Add to Wish List

Qty

Sale - Save 11%

$ 45.00

This product was last offered at the strikethrough price on
05-14-2026

$ 39.97 USD

Add to Wish List

Genuine BMW Intake Valve - 34,2/4,968Mm
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N51,N52,N52N

Show More Show Less

VTT Billet N5X Power Steering Pulley - Anodized Black - BMW E82/88 E9...

2X Entries Into Our F80 M3 Sweepstakes

T#:7403161

Part#: N54PSPULLEYBLK

Ships in 5 Business Days

Sale - Save 15% $ 54.99

This product was last offered at the strikethrough price on
09-03-2026

$ 46.74 USD

Add to Wish List

Qty

Sale - Save 15%

$ 54.99

This product was last offered at the strikethrough price on
09-03-2026

$ 46.74 USD

Add to Wish List

A well-known issue with the N54 (and early N55) with Hydraulic power steering is the plastic pulley either hitting the subframe or simply breaking on its own. This can cause the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. To top it off, if you continue to run the vehicle with the belt off, you also have a good chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic Power Steering pulley issues with Vargas' 100% Billet Aluminum PS pulley. VTT makes these from 6061-T6 aluminum and anodizes them in one of 4 colors (Black, Red, Blue, and Clear) for a great look and long-lasting finish. These weigh 11Oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Red - Most BMWs 2006+ (E/...

2X Entries Into Our F80 M3 Sweepstakes

T#:7530034

Part#: COOLANTCAPRED

Ships in 1-2 days

Sale - Save 15% $ 79.99

This product was last offered at the strikethrough price on
09-03-2026

$ 67.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 79.99

This product was last offered at the strikethrough price on
09-03-2026

$ 67.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

Genuine BMW Torx Screw With Ribs - 33211227944

T#:59777

Part#: 33211227944

In Stock

Sale - Save 9% $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.81 USD

Add to Wish List

Qty

Sale - Save 9%

$ 23.99

This product was last offered at the strikethrough price on
08-26-2026

$ 21.81 USD

Add to Wish List

Genuine BMW Torx Screw With Ribs - M12X50 Phr
This item fits the following BMW Chassis:
E39 M5,E60 M5,E63 M6,E82 1M Coupe,E38,E39,E63,E82,E90,E92,E93

VTT N54 "Mickey Mouse" Cylinder Head Adapter W/ O-ring And Clamp (No ...

2X Entries Into Our F80 M3 Sweepstakes

T#:26404815

Part#: VTT-N54-COOLANT9

In Stock

Sale - Save 15% $ 31.99

This product was last offered at the strikethrough price on
09-03-2026

$ 27.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 31.99

This product was last offered at the strikethrough price on
09-03-2026

$ 27.19 USD

Add to Wish List

Genuine BMW Downpipe Exhaust Gasket - N54

T#:19636

Part#: 18307553603

In Stock

Sale - Save 25% $ 32.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.79 USD

Add to Wish List

Qty

Sale - Save 25%

$ 32.99

This product was last offered at the strikethrough price on
03-31-2026

$ 24.79 USD

Add to Wish List

Genuine BMW EXHAUST SYSTEM GASKET

VTT Billet Coolant Reservoir Cap - Anodized Blue - Most BMWs 2006+ (E...

2X Entries Into Our F80 M3 Sweepstakes

T#:7530036

Part#: COOLANTCAPBLUE

In Stock

Sale - Save 15% $ 79.99

This product was last offered at the strikethrough price on
09-03-2026

$ 67.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 79.99

This product was last offered at the strikethrough price on
09-03-2026

$ 67.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

Genuine BMW Ignition Coil - E9X E60 X3 X5 X6 Z4

T#:2910

Part#: 12137594937

In Stock

Sale - Save 10% $ 82.89

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.60 USD

Add to Wish List

Qty

Sale - Save 10%

$ 82.89

This product was last offered at the strikethrough price on
08-26-2026

$ 74.60 USD

Add to Wish List

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the OEM Genuine BMW/Bosch ignition coil that is the current replacement for some BMW 6 and 8-cylinder engines built from the late 2000s and after. It's listed as a replacement coil for N54, N63, S63, and S63TU engines (but may be split into specific model years, see below). BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. This part number replaces previous BMW part numbers 12137571643, 12137562744, and 12137551049.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011-2013 E82 BMW 1M Coupe
2007-2010 E9X BMW 335i 335xi
2007-2010 E60 BMW 535i 535xi
6/2009-2010 E60 BMW 550i
2011+ F10 BMW 550i 550i xDrive M5
6/2009-2011 E63 BMW 650i
2012+ F12 BMW 650i
2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is

Show More Show Less

VTT Billet N5X Power Steering Pulley - Anodized Blue - BMW E82/88 E9X...

2X Entries Into Our F80 M3 Sweepstakes

T#:7403164

Part#: N54PSPULLEYBLUE

In Stock

Sale - Save 15% $ 54.99

This product was last offered at the strikethrough price on
09-03-2026

$ 46.74 USD

Add to Wish List

Qty

Sale - Save 15%

$ 54.99

This product was last offered at the strikethrough price on
09-03-2026

$ 46.74 USD

Add to Wish List

A well-known issue with the N54 (and early N55) with Hydraulic power steering is the plastic pulley either hitting the subframe or simply breaking on its own. This can cause the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. To top it off, if you continue to run the vehicle with the belt off, you also have a good chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic Power Steering pulley issues with Vargas' 100% Billet Aluminum PS pulley. VTT makes these from 6061-T6 aluminum and anodizes them in one of 4 colors (Black, Red, Blue, and Clear) for a great look and long-lasting finish. These weigh 11Oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1-2 days

Sale - Save 19% $ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 798.99 USD

Add to Wish List

Qty

Sale - Save 19%

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 798.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

VTT Compete N54 Coolant Hose Kit - E8X, E9X N54

2X Entries Into Our F80 M3 Sweepstakes

T#:590227

Part#: VTT-N54-COOLANT-

Ships in 10 Business Days

Sale - Save 15% $ 469.99

This product was last offered at the strikethrough price on
09-03-2026

$ 399.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 469.99

This product was last offered at the strikethrough price on
09-03-2026

$ 399.49 USD

Add to Wish List

A complete upgrade to the weak factory hoses.

Genuine BMW Inspection I Oil Change Kit - N20 N52 N54 N55

T#:555600

Part#: N5XGOSKT

In Stock

Sale - Save 10% $ 138.99

This product was last offered at the strikethrough price on
09-03-2026

$ 125.09 USD

Add to Wish List

Qty

Sale - Save 10%

$ 138.99

This product was last offered at the strikethrough price on
09-03-2026

$ 125.09 USD

Add to Wish List

Looking to change your oil and only want the best? Genuine BMW oil service kits feature the exact oil and components BMW intended for use in your premium vehicle when being serviced at the dealership. This ensures your vehicle continues to perform flawlessly, running longer and cleaner!

This kit includes:

OEM oil filter kit
Oil drain plug with gasket
7 quarts of BMW synthetic engine oil

Show More Show Less

Vargas PCV Cover & Valve Upgrade - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51813319

Part#: VTT-N54-UPCVVK

Ships in 1-2 days

Sale - Save 15% $ 64.99

This product was last offered at the strikethrough price on
09-03-2026

$ 55.24 USD

Add to Wish List

Qty

Sale - Save 15%

$ 64.99

This product was last offered at the strikethrough price on
09-03-2026

$ 55.24 USD

Add to Wish List

Maintain peak engine efficiency and stop annoying oil smoke with the VTT N54 Upgraded PCV Valve Complete Kit.

Genuine BMW Spark Plug - E82/88 E70 E60 E9X N52 3.0L

T#:12343

Part#: 12122158253

In Stock

Sale - Save 8% $ 26.79

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.78 USD

Add to Wish List

Qty

Sale - Save 8%

$ 26.79

This product was last offered at the strikethrough price on
08-26-2026

$ 24.78 USD

Add to Wish List

This is an Genuine BMW High Power Spark Plug. It is used on BMW's with the N52 twin scroll turbocharged 6 cylinder engine. We recommend changing spark plugs every 60,000-80,0000 miles.

Genuine BMW Pilot Bearing

T#:360764

Part#: 21207536792

Ships in 1-2 days

Sale - Save 9% $ 29.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.25 USD

Add to Wish List

Qty

Sale - Save 9%

$ 29.99

This product was last offered at the strikethrough price on
08-26-2026

$ 27.25 USD

Add to Wish List

Genuine BMW Rear Fender Liner - Right - E82 1 M Coupe

T#:118100

Part#: 51718051594

Ships in 1-2 days

Sale - Save 8% $ 164.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 151.71 USD

Add to Wish List

Qty

Sale - Save 8%

$ 164.99

This product was last offered at the strikethrough price on
08-26-2026

$ 151.71 USD

Add to Wish List

Genuine BMW Cover, Wheell Housing, Rear Right
This item fits the following BMW Chassis:
E82 1M Coupe,E82

Genuine BMW Power Steering Fluid Reservoir - E82/88 E9X

For vehicles without active steering only

T#:58480

Part#: 32416851218

In Stock

Sale - Save 6% $ 121.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 6%

$ 121.99

This product was last offered at the strikethrough price on
05-02-2026

$ 114.99 USD

Limited Qty Sale

Add to Wish List

Power steering fluid reservoirs hold excess fluid as well as filter contaminants from the system. Regular replacement will increase the lifespan of your power steering system.

Genuine BMW Travel & Comfort System Base Support

T#:24262

Part#: 51952183852

In Stock

Sale - Save 12% $ 38.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.46 USD

Add to Wish List

Qty

Sale - Save 12%

$ 38.99

This product was last offered at the strikethrough price on
07-06-2026

$ 34.46 USD

Add to Wish List

Genuine BMW BASE SUPPORT

Piston Ring Repair Kit

T#:33521

Part#: 11257559434

In Stock

Sale - Save 8% $ 121.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 112.23 USD

Add to Wish List

Qty

Sale - Save 8%

$ 121.99

This product was last offered at the strikethrough price on
08-26-2026

$ 112.23 USD

Add to Wish List

Genuine BMW Repair Kit Piston Rings - (0)
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less

Genuine BMW Bearing Shell

T#:33057

Part#: 11247628034

In Stock

Sale - Save 8% $ 41.45

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 8%

$ 41.45

This product was last offered at the strikethrough price on
08-10-2026

$ 37.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Bearing Shell, Red - 50,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Vargas Ignition Coil Kit (Red) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309610

Part#: VTT-COIL-N5X-RED

In Stock

Sale - Save 15% $ 169.99

This product was last offered at the strikethrough price on
09-03-2026

$ 144.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 169.99

This product was last offered at the strikethrough price on
09-03-2026

$ 144.49 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Genuine BMW Gasket Ring - 18407530606

T#:48771

Part#: 18407530606

In Stock

Sale - Save 7% $ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 7%

$ 27.99

This product was last offered at the strikethrough price on
06-15-2026

$ 25.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Gasket Ring -
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less

Genuine BMW Pocket Umbrella - 80235B70D03

T#:50839181

Part#: 80235B70D03

Ships in 2 Business Days

3% off MSRP $ 36.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Qty

3% off MSRP

$ 36.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD

Add to Wish List

Built to original equipment quality standards, this accessory features a heavy duty canopy on a sturdy telescoping frame designed to handle sudden rainstorms. It's compact profile makes it an ideal fit for center consoles, door pockets, or trunk utility trays. Complete with an ergonomic grip handle and integrated deployment button, this original BMW accessory combines daily practicality with authentic brand style.

Show More Show Less

Genuine BMW Key Case - 51218213607 - E30,E34,E36,E38,E39,E46,E53 ...

T#:9264

Part#: 51218213607

In Stock

Sale - Save 6% $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 6%

$ 51.99

This product was last offered at the strikethrough price on
06-15-2026

$ 48.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Key Case
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E39 M5,E46 M3,E30,E34,E36,E38,E39,E46,E53 X5

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

2X Entries Into Our F80 M3 Sweepstakes

T#:7530040

Part#: VACUUMCANBLUE

Ships in 1 Business Day

Sale - Save 15% $ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

VTT Billet Power Steering Pulley - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:7292042

Part#: VTT-N54-PSN54

Ships in 2 Business Days

Sale - Save 15% $ 56.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 48.44 USD

Add to Wish List

Sale - Save 15%

$ 56.99

This product was last offered at the strikethrough price on
09-03-2026

Starting at $ 48.44 USD

Add to Wish List

Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

Genuine BMW Activated Carbon Cabin Filter - E82/88 E9X E84

T#:183846

Part#: 64319313519

In Stock

Sale - Save 8% $ 76.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.48 USD

Add to Wish List

Qty

Sale - Save 8%

$ 76.99

This product was last offered at the strikethrough price on
08-26-2026

$ 70.48 USD

Add to Wish List

Original BMW Microfilter/Activated Carbon

We also stock an aftermarket replacement for this filter at a lower price under part number 64319142115

Show More Show Less

Genuine BMW Tow Hook Cover - Front - E82 E88 128i 135i

T#:76897

Part#: 51117892595

In Stock

Sale - Save 10% $ 28.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 10%

$ 28.99

This product was last offered at the strikethrough price on
08-10-2026

$ 25.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Flap, Towing Eye, Primed -
This item fits the following BMW Chassis:
E82

Genuine BMW Transmission Belly Pan

For vehicles with automatic transmission only

T#:119270

Part#: 51757163562

In Stock

Sale - Save 16% $ 145.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 123.30 USD

Add to Wish List

Qty

Sale - Save 16%

$ 145.99

This product was last offered at the strikethrough price on
08-26-2026

$ 123.30 USD

Add to Wish List

Genuine BMW Underfloor Coating, Center Front -
This item fits the following BMW Chassis:
E82,E90,E92,E93

Vargas Ignition Coil Kit (Blue) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309605

Part#: VTT-COIL-N5X-BLU

In Stock

Sale - Save 15% $ 169.99

This product was last offered at the strikethrough price on
09-03-2026

$ 144.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 169.99

This product was last offered at the strikethrough price on
09-03-2026

$ 144.49 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Clear - BMW...

2X Entries Into Our F80 M3 Sweepstakes

T#:7530039

Part#: VACUUMCANRAW

In Stock

Sale - Save 15% $ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

Genuine BMW Sway Bar Link - Front Left - E9x M3, 1m Coupe

T#:22827

Part#: 31352283441

In Stock

Sale - Save 8% $ 87.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 81.02 USD

Add to Wish List

Qty

Sale - Save 8%

$ 87.99

This product was last offered at the strikethrough price on
08-26-2026

$ 81.02 USD

Add to Wish List

This is the genuine BMW front left stabilizer bar link for the E9x M3 with S65 engine and 1m Coupe.

This item fits the following BMWs:
2011+ E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Show More Show Less

VTT M12 Titanium Wheel Stud Kits

2X Entries Into Our F80 M3 Sweepstakes

T#:7292019

Part#: TISTUD20125

In Stock

Sale - Save 7% $ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD

Add to Wish List

Sale - Save 7%

$ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD

Add to Wish List

VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M12x1.5x75mm This fits all M12x1.5 applications Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

2X Entries Into Our F80 M3 Sweepstakes

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 1-2 days

Sale - Save 15% $ 31.99

This product was last offered at the strikethrough price on
09-03-2026

$ 27.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 31.99

This product was last offered at the strikethrough price on
09-03-2026

$ 27.19 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

CONNECTING LINE AIRB

For vehicles with production date from 02/2006

T#:573938

Part#: 32306998946

In Stock

Sale - Save 9% $ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 124.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 9%

$ 136.99

This product was last offered at the strikethrough price on
06-15-2026

$ 124.99 USD

Limited Qty Sale

Add to Wish List

VTT N54 Vacuum Pump Block Off Plate

2X Entries Into Our F80 M3 Sweepstakes

T#:11497328

Part#: VTT-N54-VACUUM-B

Ships in 10 Business Days

Sale - Save 15% $ 127.99

This product was last offered at the strikethrough price on
09-03-2026

$ 108.37 USD

Add to Wish List

Qty

Sale - Save 15%

$ 127.99

This product was last offered at the strikethrough price on
09-03-2026

$ 108.37 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

Genuine BMW Rear Upper Shock Mount, Bottom - 33506771738

T#:348679

Part#: 33506771738

In Stock

Sale - Save 18% $ 28.47

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.31 USD

Add to Wish List

Qty

Sale - Save 18%

$ 28.47

This product was last offered at the strikethrough price on
05-14-2026

$ 23.31 USD

Add to Wish List

Replace your shock mount each time you replace your shocks to reduce noise and vibrations from the road and suspension system. Failing shock mounts may also end up leading to knocking and rattling sounds coming from the rear suspension.

Show More Show Less

VTT Complete Blue N54 Coolant Hose Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:17771579

Part#: VTT-N54-COOLANTB

In Stock

Sale - Save 15% $ 464.99

This product was last offered at the strikethrough price on
09-03-2026

$ 395.24 USD

Add to Wish List

Qty

Sale - Save 15%

$ 464.99

This product was last offered at the strikethrough price on
09-03-2026

$ 395.24 USD

Add to Wish List

Upgrade your BMW N54's cooling system with VTT's Billet/Silicone coolant hose upgrade kit. Designed to address common issues with factory plastic connectors and standard coolant hoses, this kit offers premium enhancements for durability and performance. Crafted with Billet 6061-T6 connectors for corrosion resistance and 6-ply molded silicone hoses in factory shapes, it ensures reliability and longevity for your BMW's cooling system.

Upgraded Billet 6061-T6 connectors for enhanced durability
Corrosion-resistant black anodized finish
6-ply molded silicone hoses for superior performance
Factory-shaped design for easy installation

Show More Show Less

High Pressure Pipe

T#:42219

Part#: 13537576771

Ships in 1-2 days

Sale - Save 8% $ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.05 USD

Add to Wish List

Qty

Sale - Save 8%

$ 83.99

This product was last offered at the strikethrough price on
08-26-2026

$ 77.05 USD

Add to Wish List

Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results