BMW Suspension Parts for BMW 1 Series E82 (2008-2013)

Rear Shock Mounts (RSM) - Lower + Upper - OEM Rubber - E82, E9X (not ...

10X Entries Into Our F80 M3 Sweepstakes

T#:11953

Part#: E9X-REAR-MOUNTS

Ships in 4 Business Days

Sale - Save 3% $ 96.91

This product was last offered at the strikethrough price on
08-28-2026

$ 93.71 USD

Add to Wish List

Qty

Sale - Save 3%

$ 96.91

This product was last offered at the strikethrough price on
08-28-2026

$ 93.71 USD

Add to Wish List

A 5-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1-series and E90/E91/E92/E93 3-series consist of 4 pieces -
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
In addition, there is a lower shock mount to locate the shock to the suspension (installs on spring arm), 33526768544.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 5 pieces.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

10X Entries Into Our F80 M3 Sweepstakes

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...

T#:389645

Part#: 192416-1J

In Stock

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

1-series Strut/Shock Mount Kit - E82 128i, 135i

10X Entries Into Our F80 M3 Sweepstakes

T#:11958

Part#: E82MOUNTKIT

Ships in 4 Business Days

Sale - Save 2% $ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 165.35 USD

Add to Wish List

Qty

Sale - Save 2%

$ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 165.35 USD

Add to Wish List

Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

Included in the E82 1-series Mount Kit:

front upper strut mounts (also known as a guide support), 31306775098

A. rear upper-top shock mounts, 33506771737

B. rear upper-middle shock mounts, 33506767010

C. rear upper-bottom shock mounts, 33506771738

D. rear upper supporting cup, 33526764418 (sits over bumpstop)

rear lower shock mount (installs on spring arm), 33526768544
Buy as a package and save $!!

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i - Coupe
2008-2012 E88 BMW 128i 135i - Convertible

Show More Show Less

OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...

10X Entries Into Our F80 M3 Sweepstakes

T#:11954

Part#: TMS11954

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
The lower mount on the 1M/M3 is integrated on the shock absorber.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2011 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible

Show More Show Less

IRP Rear Lower Shock Mount Set - E8X E9X Non-M

T#:587022

Part#: IRPRSM-90B

Ships in 4 Business Days

$ 195.00 USD

Add to Wish List

Qty

$ 195.00 USD

Add to Wish List

The stock rubber lower shock mounts tend to fail prematurely, especially when subjected to rough track conditions. These IRP lower shock mounts utilize a monoball design that is significantly stronger and helps to eliminate deflection that is caused by soft rubber. Key Benefits: Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear. Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type). Maintains OE shock position

Show More Show Less

Rear Upper And Lower Shock Mount Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:5498488

Part#: 33506767010KT

Ships in 4 Business Days

Sale - Save 3% $ 145.99

This product was last offered at the strikethrough price on
08-28-2026

$ 141.78 USD

Add to Wish List

Qty

Sale - Save 3%

$ 145.99

This product was last offered at the strikethrough price on
08-28-2026

$ 141.78 USD

Add to Wish List

Includes all the necessary mounts to install new shocks on the rear of your BMW The following parts are included. Rear Lower Shock Mount (X2) Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2) All need bolts and nuts

Show More Show Less

M3/1M Front And Rear Control Arm Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:5389743

Part#: 37142283867TMSKT

Ships in 3 Business Days

Sale - Save 12% $ 1,317.99

This product was last offered at the strikethrough price on
03-17-2026

$ 1,158.03 USD

Add to Wish List

Qty

Sale - Save 12%

$ 1,317.99

This product was last offered at the strikethrough price on
03-17-2026

$ 1,158.03 USD

Add to Wish List

Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.

Show More Show Less

E9X M3 Front Control Arm Upgrade Kit w/ Installation Hardware ...

10X Entries Into Our F80 M3 Sweepstakes

T#:30430683

Part#: 37142283867EKT2

In Stock

Sale - Save 14% $ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Qty

Sale - Save 14%

$ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Enhance your BMW's performance with our premium control arm upgrade kit from Turner Motorsport! This kit provides a significant handling upgrade without sacrificing ride quality. Perfect for enthusiasts looking to replace their factory control arms with sturdier, high-performance alternatives, this kit features stiffer bushings and ball joints for improved precision.

Key Benefits:

Improved Handling: Experience more precise and responsive steering, giving your BMW a sportier feel. Increased Durability: Our control arms are much sturdier than factory units, ensuring long-lasting performance. Negative Camber Adjustment: Adds approximately 0.75 degrees of negative camber to the front, enhancing cornering grip and stability. Complete Kit: Includes all four M3-specific lower control arms with mounting hardware. M3 Headlight Leveling Rod: Necessary for proper installation, ensuring your headlights are correctly aligned. Important Note for Z4 Models: For Z4 owners, please be aware that the M3 headlight level sensor rod is positioned differently. A custom solution will be required to attach the sensor rod to the control arm. Currently, we do not offer a direct solution for this issue.

Upgrade your BMW's suspension with confidence! Enjoy a smoother, more controlled ride with our premium control arm upgrade kit!

Show More Show Less

Shocks and spring Installation Kit - E82 E88 E90 E92 E93 Non M ...

10X Entries Into Our F80 M3 Sweepstakes

T#:553668

Part#: 31306775098KT2

Ships in 4 Business Days

Sale - Save 1% $ 354.99

This product was last offered at the strikethrough price on
08-28-2026

$ 350.97 USD

Add to Wish List

Qty

Sale - Save 1%

$ 354.99

This product was last offered at the strikethrough price on
08-28-2026

$ 350.97 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

Fits the following BMW's

E82/88 128i 135i

E90/92/93 325i 328i 330i 335i 335is

Show More Show Less

Set of Rear Lower Shock Mounts

T#:7164814

Part#: IRPRSM-90PU

Ships in 2 Business Days

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

Rear Lower Shock Mounts - Set With Polyurethane Inserts BMW E8X, E9X (not M Models)

OEM TRW Front Upper Control Arm - Right - E82 1M, E9X M3

10X Entries Into Our F80 M3 Sweepstakes

T#:338043

Part#: 31102283576

In Stock

Starting at $ 88.99 USD

Add to Wish List

Starting at $ 88.99 USD

Add to Wish List

This right/passenger's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OE BMW replacement (made by TRW) and fits E82 1M Coupe and E90/E92/E93 M3. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer.

This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 325xi 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible

Show More Show Less

Front Lower Control Arm - Right - E82 1M, E9X M3

10X Entries Into Our F80 M3 Sweepstakes

T#:338352

Part#: 31102283578X

Ships on Jan 6, 2027

$ 145.99

This product was last offered at the strikethrough price on
04-28-2026

Starting at $ 110.27 USD

Add to Wish List

Starting at $ 110.27 USD

Add to Wish List

This right/passenger's front lower control arm - also know as a wishbone - 31102283578 . This is the control arm with the outer ball joint pointing up. This is the OEM or OE M3 part and fits E82 1M and E90/E92/E93 M3. It's also an upgrade for all non-M E82 and E9X models (except Xi). This control arm includes the inner rotating, sealed mono-balljoint and outer ball joint. A direct replacement.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2012 E92 BMW M3 Coupe
2008-2012 E93 BMW M3 Convertible

Show More Show Less

E82 128i Rear Sway Bar Parts Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:180694

Part#: TMS180694

Ships in 4 Business Days

$ 167.99

This product was last offered at the strikethrough price on
05-07-2026

$ 154.99 USD

Add to Wish List

Qty

$ 154.99 USD

Add to Wish List

The non-Sport E82 128i did not come with a rear sway bar. If you're adding the Sport package bar or another aftermarket type you will need this additional package of mounting parts and rear swaybar links to complete the install. This package includes:

rear sway bar bushing brackets, 33556780707
bracket mounting screws, 07119907125
rear sway bar links, 33556764428
lower link mounting bolts, 07119903931
upper link mounting nuts, 33326768884

This kit also makes a nice package as part of a rear suspension overhaul.

This item fits the following BMWs:
2008-2012 E82 BMW 128i without sport package

Show More Show Less

M3/1M Front and rear Control Arm Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:557628

Part#: 33322283547KT9

Ships on Jan 7, 2027

Sale - Save 7% $ 966.99

This product was last offered at the strikethrough price on
03-13-2026

$ 895.30 USD

Add to Wish List

Qty

Sale - Save 7%

$ 966.99

This product was last offered at the strikethrough price on
03-13-2026

$ 895.30 USD

Add to Wish List

Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.

Show More Show Less

KMAC Adjustable Rear Camber And Toe Bushings Set - E82, E89, E9X non-...

T#:389667

Part#: 193926K

Ships on Sep 30, 2026

13% off MSRP $ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD

Limited Qty Sale

Add to Wish List

Qty

13% off MSRP

$ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD

Limited Qty Sale

Add to Wish List

Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

Fits the following BMWs:
E82/88 BMW 2 Series
E89 BMW Z4
E9X BMW Non-M

Show More Show Less

M3 Rear Guide Rod Upgrade - Left and Right - E82, E9x

10X Entries Into Our F80 M3 Sweepstakes

T#:340278

Part#: TMS12080

Ships in 2 Business Days

$ 322.99

This product was last offered at the strikethrough price on
03-17-2026

Starting at $ 302.98 USD

Add to Wish List

Starting at $ 302.98 USD

Add to Wish List

These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting).

This package includes:

Left M3 Guide Rod - 33322283547
Right M3 Guide Rod - 33322283548

Buy as a package and save $$!

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible

Show More Show Less

Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...

T#:4648679

Part#: 69.10.100

Ships in 10 Business Days

$ 289.00 USD

Add to Wish List

Qty

$ 289.00 USD

Add to Wish List

Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.

Show More Show Less

Cup Kit/Coilover Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644279

Part#: 31306763966-KT

Ships in 4 Business Days

$ 518.74

This product was last offered at the strikethrough price on
08-28-2026

$ 515.18 USD

Add to Wish List

Qty

$ 515.18 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job.

Front Lower Control Arm - Left - E82 1M, E9X M3

10X Entries Into Our F80 M3 Sweepstakes

T#:338351

Part#: 31102283577X

In Stock

Starting at $ 99.99 USD

Add to Wish List

Starting at $ 99.99 USD

Add to Wish List

This left/driver's front lower control arm # 31102283577 - also know as a wishbone. This is the control arm with the outer ball joint pointing up. This is the OEM or OE M3 part and fits E82 1M and E90/E92/E93 M3. It's also an upgrade for all non-M E82 and E9X models (except Xi) (also requires headlight rod, 37142283867). This control arm includes the inner rotating, sealed mono-balljoint and outer ball joint. A direct replacement.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2012 E92 BMW M3 Coupe
2008-2012 E93 BMW M3 Convertible

Show More Show Less

Cup Kit/Coilover Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:14618151

Part#: 31306775098TKT

Ships in 4 Business Days

$ 518.74

This product was last offered at the strikethrough price on
08-28-2026

$ 515.18 USD

Add to Wish List

Qty

$ 515.18 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job.

See kit contents tab for a list of included components.

Show More Show Less

Rear Upper Shock Mount Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710806

Part#: 33506771738-KT

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Includes all the necessary mounts to install new shocks on the rear of your E9X BMW. The following parts are included. Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2)

Show More Show Less

Rear Differential Mounts - OEM Rubber - E82, E9X

10X Entries Into Our F80 M3 Sweepstakes

T#:386282

Part#: E9X-DIFF-MOUNTS

Ships in 4 Business Days

$ 193.25 USD

Add to Wish List

Qty

$ 193.25 USD

Add to Wish List

This package of OEM E82 E90 E92 diff mounts replaces the stock rubber diff bushings. On a tuned 335i you may have noticed more driveline shudder or problems hooking up during hard launches. What happens is the stock rubber bushings are under constant flex as engine torque is transmitted through the differential. Under normal driving with a stock car the bushings are rarely stressed. But factor in significant additional torque from a tuned N54/N55 and the stock rubber will quickly show its weaknesses. You may have even broken a diff bolt or two as the heavy differential shifts around. Even non-turbo E82 and E9X models may benefit from fresh bushings.

This is a set of stock rubber bushings, made by OEM supplier Lemforder. They are the same as the Genuine BMW E9X diff mount bushings, but without the more expensive branding. If you're turned off by potential side effects of urethane or Delrin then the OEM diff mounts are your best option. The OEM mounts fit and perform just like the originals so there is no second guessing their quality. If you're looking for an upgrade we offer E9X solid Delrin and aluminum diff mounts that work well, even in street applications.

E9X Diff Mount Set includes:

33176760287 x 2, front differential mount
33176770866 x 1, rear differential mount
(new hardware is optional and can be ordered separately below)

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible

Show More Show Less

M3/1M Front And Rear Control Arm Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:28104822

Part#: 37142283867TKT

Ships on Jan 7, 2027

Sale - Save 1% $ 1,054.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,043.71 USD

Add to Wish List

Qty

Sale - Save 1%

$ 1,054.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,043.71 USD

Add to Wish List

Featuring quality aftermarket M3 control arms plus Performance Rear Trailing arms Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy. Not sure about ECS Tuning's Upgraded Trailing arm? Let us explain... Factory steel rear trailing arms flex, causing undesired suspension geometry changes under load. BMW engineered a failure point into this stock arm - metal fatigue combined with shock forces from a pothole or curb, have been shown in some cases to cause the arm to buckle, turning a pleasant drive into a visit by roadside assistance. ECS Tuning's Performance Rear Trailing Arm Set is an upgrade that has been engineered to address these issues, while also being lighter and more attractive than the factory steel component. Elimination of a factory-designed failure point and an all-around stiffer design mean greater peace of mind as well as more confident handling with no unintended geometry changes. Combined with new M3/1M front and rear control arms for the ideal suspension set-up for your car. Kit Features: quality aftermarket M3/1M Front Control Arms quality aftermarket M3/1M Rear Control Arms ECS Upgraded Rear Trailing Arm BMW Headlight Leveling Sensor Rod BMW Rear ABS Bracket quality aftermarket Rear Guide Rods Trailing Arm features: Constructed from solid 6061-T6 aluminum Anodized for corrosion resistance Increased strength versus the factory steel arm - this arm fears no pot holes 25% lighter (384 grams versus 517 grams each)

Show More Show Less

ECS & Turner Performance Drivetrain Bushing Package - E82/88 E9X N52 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:24344778

Part#: ECSTMSPDBKT

In Stock

Sale - Save 8% $ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD

Add to Wish List

Turner recommends running drivetrain mounts of all the same variety - if you are using poly engine mounts, you should also use poly transmission mounts. This kit is your solution to make sure all components of your vehicle are working with each other to achieve the performance you're looking for. Polyurethane material is more resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber. Keep your vehicle planted for spirited driving while having crisper throttle response and reduce drivetrain movement along with wheel hop. Kit includes: Turner Engine Mount Set - 60A Polyurethane ECS Transmission Mount Set - Street 70A Polyurethane ECS Differential Bushing Set - 95A Polyurethane ECS Subframe Mount Set - 95A - Polyurethane

Show More Show Less

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...

T#:389647

Part#: 192416-2L

Ships on Sep 18, 2026

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...

T#:389646

Part#: 192416-3L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

IRP Performance Rear Lower Control Arm Bushing - Inner - 8x, E9x, F87...

The lowest arm housing the coil spring

T#:2408498

Part#: IRPRSB-9XMB2

Special Order: No Guaranteed ETA

$ 176.99 USD

Add to Wish List

Qty

$ 176.99 USD

Add to Wish List

Enhance road feel and keep your vehicle more planted with these upgraded aluminum bushings. Less play allows for more precise suspension articulation, making for a better performance driving experience.

Show More Show Less

IRP Polyurethane Subframe Bushing Set - 90A - E9X, E8X (non-M) ...

T#:2408491

Part#: IRPRSB-90PU

Special Order: No Guaranteed ETA

$ 175.00 USD

Add to Wish List

Qty

$ 175.00 USD

Add to Wish List

Replacing your worn stock rubber subframe bushings with IRP's polyurethane bushing set will transform the way your car drives. Stiffer than stock, these bushings still absorb NVH which allows them to be comfortably used on the street without heavily reducing ride quality.

Show More Show Less

TMS Performance Adjustable Rear Suspension Upgrade Kit - E9X, E8X Non...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241361

Part#: E9XPERFSUSR2KT

Ships on Nov 6, 2026

$ 1,909.99

This product was last offered at the strikethrough price on
09-02-2026

$ 1,907.94 USD

Add to Wish List

Qty

$ 1,907.94 USD

Add to Wish List

We put together the ultimate rear geometry overhaul kit to lock down your chassis, eliminate unwanted flex, and give you pin point alignment control. Whether you're setting up for aggressive street driving, track days, or full blown racing, this package transforms how your BMW puts power to the ground.

Show More Show Less

TMS Performance Adjustable Front Suspension Upgrade Kit - E9X, E8X ...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241346

Part#: E9XPERFSUSF2KT

In Stock

Sale - Save 3% $ 2,538.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,462.36 USD

Add to Wish List

Qty

Sale - Save 3%

$ 2,538.99

This product was last offered at the strikethrough price on
05-03-2026

$ 2,462.36 USD

Add to Wish List

Having issues with bump steer or sway bar preload in your lowered car? Looking for wider range of suspension adjustability? Look no further! This comprehensive kit contains all of the parts used and recommended by Turner Motorsport to correct, upgrade, and fine tune your suspension to your liking! From roll-center correction to widened range of adjustment over factory eccentric bolts, the parts in this kit have got you covered. Make the most of your BMW by replacing the slop of rubber bushings with spherical bearings and eliminating the limited adjustability of the factory suspension geometry. Kit Contents: Front: Lower Control Arms - Roll center, camber, track width, and headlight leveling adjustability Thrust Arms - Caster adjustment Tie Rod Ends - Bump steer, roll center, and tie rod binding correction Sway Bar End Links - Adjustable height to eliminate preload For more detailed information on individual parts please view the kit contents section at the bottom of the page.

Show More Show Less

M3/1M Front and rear Control Arm Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644253

Part#: 37142283867KT

Ships on Jan 7, 2027

$ 1,407.99

This product was last offered at the strikethrough price on
03-14-2026

$ 1,342.99 USD

Add to Wish List

Qty

$ 1,342.99 USD

Add to Wish List

Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy.

Show More Show Less

Rear Upper And Lower Shock Mount Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677517

Part#: 33526764406-KT

Ships in 4 Business Days

$ 152.99

This product was last offered at the strikethrough price on
08-28-2026

$ 148.99 USD

Add to Wish List

Qty

$ 148.99 USD

Add to Wish List

Includes all the necessary mounts to install new shocks on the rear of your BMW The following parts are included. Rear Lower Shock Mount (X2) Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2) All need bolts and nuts

Show More Show Less

Complete Performance Polyurethane Differential And Subframe Bushing S...

10X Entries Into Our F80 M3 Sweepstakes

T#:56038061

Part#: E9XSBFRDFFBKT2

In Stock

$ 491.99 USD

Add to Wish List

Qty

$ 491.99 USD

Add to Wish List

This complete upgrade package is designed to put an end to steering slop. Utilizing a high performance 95A durometer polyurethane formulation, this kit replaces the mushy OEM rubber with proven rigidity.

Show More Show Less

GSP Loaded Front Strut - Right - E82, E88, E90, E91, E92, E93 ...

T#:389678

Part#: 827214

Ships in 3 Business Days

$ 188.99 USD

Add to Wish List

Qty

$ 188.99 USD

Add to Wish List

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

This item fits the following BMWs:

E82/88 BMW 128i 135i

E90/92 BMW 325i 328i 328i xDrive 330i 335i

Show More Show Less

GSP Loaded Front Strut - Left - E82, E88, E90, E91, E92, E93 ...

T#:389680

Part#: 827213

Ships in 3 Business Days

$ 188.99 USD

Add to Wish List

Qty

$ 188.99 USD

Add to Wish List

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

This item fits the following BMWs:

E82/88 BMW 128i 135i

E90/92 BMW 325i 328i 328i xDrive 330i 335i

Show More Show Less

M3/1M Front And Rear Control Arm Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:23152016

Part#: 371422838671KT

Ships in 3 Business Days

$ 1,246.99

This product was last offered at the strikethrough price on
08-13-2026

$ 1,246.80 USD

Add to Wish List

Qty

$ 1,246.80 USD

Add to Wish List

Featuring quality M3 control arms plus Performance Rear Trailing arms

Rear Upper Control Arm Upgrade and Install Kit - E9x M3, 1M

10X Entries Into Our F80 M3 Sweepstakes

T#:55353608

Part#: 33322283547KT11

Ships in 3 Business Days

$ 583.99 USD

Add to Wish List

Qty

$ 583.99 USD

Add to Wish List

Over time, those soft OE rubber bushings degrade, turning your tight BMW handling into a vague, mushy mess and eating through your tires.

SPL Titanium Series Adjustable Rear Toe Arms With Eccentric Lockout K...

10X Entries Into Our F80 M3 Sweepstakes

T#:56001958

Part#: SPLRUAE9XKT2

Ships in 6 Business Days

$ 1,258.00 USD

Add to Wish List

Qty

$ 1,258.00 USD

Add to Wish List

This premium SPL chassis upgrade kit is engineered to anchor your rear axle. Featuring SPL’s Titanium Series Rear Toe Arms with an eccentric lockout kit, alongside a complete 4 piece set of Rear Upper Wishbones and Guide Links

Show More Show Less

M3/1M Rear Upper Control Arm Upgrade Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:41897482

Part#: 33322283547TKT

Ships in 9 Business Days

$ 487.99

This product was last offered at the strikethrough price on
04-28-2026

$ 401.99 USD

Add to Wish List

Qty

$ 401.99 USD

Add to Wish List

Upgrade your BMW’s rear suspension with confidence. Unlock sharper handling, better rear traction, and race-bred geometry—without sacrificing daily comfort or reliability.

IRP Complete Front Drift Suspension Kit - E8X, E9X (NON M)

T#:2408486

Part#: IRPDK9X-1

Special Order: No Guaranteed ETA

$ 2,413.99 USD

Add to Wish List

Qty

$ 2,413.99 USD

Add to Wish List

Precision far beyond what the engineers at BMW had in mind, the IRP drift suspension kit allows you to adjust and fine tune your suspension perfectly for your drift setup. Features and specs: Drift kit is fully CNC machined from High Grade Billet Aluminium Increases steering angle up to ~66° 4 adjustable Ackerman positions Adjustable camber plates Easily accessible caster adjustment without disassembling the control arm Fits R18 or bigger wheels Kit Contents: 2pcs. Control arms 2pcs. Tie rods ends 2pcs. Camber plates 2pcs. Knuckles All necessary nuts, washers and bolts included **NOTE** THIS KIT REQUIRES: Use of front coilovers Front sway bar delete Longer than stock brake hoses Wider front fenders or overfenders

Show More Show Less

IRP Complete Front Drift Suspension Kit - E9X M3, E82 1M

T#:2408489

Part#: IRPDK9X-1M

Special Order: No Guaranteed ETA

$ 2,550.00 USD

Add to Wish List

Qty

$ 2,550.00 USD

Add to Wish List

Precision far beyond what the engineers at BMW had in mind, the IRP drift suspension kit allows you to adjust and fine tune your suspension perfectly for your drift setup. Features and specs: Drift kit is fully CNC machined from High Grade Billet Aluminum Increases steering angle up to ~66° 4 adjustable Ackerman positions Adjustable camber plates Easily accessible caster adjustment without disassembling the control arm Fits R18 or bigger wheels Kit Contents: 2pcs. Control arms 2pcs. Tie rods ends 2pcs. Camber plates 2pcs. Knuckles All necessary nuts, washers and bolts included **NOTE** THIS KIT REQUIRES: Use of front coilovers Front sway bar delete Longer than stock brake hoses Wider front fenders or overfenders

Show More Show Less

IRP Aluminum Rear Subframe Bushing Set - E82, E9X (non-M)

T#:2408474

Part#: IRPRSB-90AL

Special Order: No Guaranteed ETA

$ 319.99 USD

Add to Wish List

Qty

$ 319.99 USD

Add to Wish List

Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.

Show More Show Less

IRP Aluminum Rear Subframe Bushing Set - E9X M3, E82 1M

T#:2408494

Part#: IRPRSB-90MAL

Special Order: No Guaranteed ETA

$ 294.99 USD

Add to Wish List

Qty

$ 294.99 USD

Add to Wish List

Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.

Show More Show Less

IRP Rear Adjustable Upper Control Arms

T#:2423565

Part#: IRPRSW-9XMMSR

Ships on Nov 6, 2026

Starting at $ 626.99 USD

Add to Wish List

Starting at $ 626.99 USD

Add to Wish List

Featuring Fluro Bearings

Front and Rear Control Arm Upgrade and Installation Kit - E9x M3, E82...

10X Entries Into Our F80 M3 Sweepstakes

T#:55353611

Part#: 31102283577KT8

Ships on Jan 7, 2027

$ 1,049.13 USD

Add to Wish List

Qty

$ 1,049.13 USD

Add to Wish List

If you want your BMW to handle like it just rolled out of the factory your suspension needs to be tight, crisp, and completely free of play.

M3/1M Front Control Arm Upgrade and Installation Kit - E9x, E82, E88 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:55353593

Part#: 31102283577KT6

Ships on Jan 7, 2027

$ 470.10 USD

Add to Wish List

Qty

$ 470.10 USD

Add to Wish List

Factory rubber bushings weren't designed to last forever. Over time, miles and hard cornering turn those soft OEM bushings into mush

Turner Rear Suspension Refresh Kit - Level 2 - E82 1M Coupe, E90/92/9...

10X Entries Into Our F80 M3 Sweepstakes

T#:583093

Part#: T33322283547KT

Back Ordered

$ 2,128.99

This product was last offered at the strikethrough price on
03-13-2026

$ 1,924.99 USD

Add to Wish List

Qty

$ 1,924.99 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results