BMW Brakes & Brake Parts for BMW 1 Series E82 (2008-2013)

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a superior zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2004-2010 E60 BMW 535i 545i 550i 

2004-2010 E63 BMW 645ci 650i

2002-2008 E65 BMW 745i/li 750i/li 760i/li

2008-2013 E9X BMW M3

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2007-2013 E9X BMW 335i/is/xdrive/d

2004-2010 E60 E61 BMW 525i/xi 528i/xi 530i/xi 535i/xi 545i 550i 

2004-2010 E63 E64 BMW 645ci 650i

2002-2008 E65 E66 BMW 745i/li 750i/li 760i/li

2011 E82 BMW 1M Coupe 

2011-2016 Z4 BMW sDrive

2012-2015 E84 BMW X1 x35i

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2006-2007 E46 BMW 325i/xi 328i/xi 330i/xi

2004, 2007 E60 BMW 525i

2009-2016 Z4 BMW

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2006-2013 E9X BMW 323i 325i/xi 328i/xi

2012-2015 E84 BMW X1

2008-2013 E87 BMW 128i