BMW Performance Intake Kits for BMW 1 Series E82 (2008-2013)

The intake boot is a regular issue especially for BMW's, nearly all vehicles have a boot manufactured from rubber with an accordion section in the design for flexibility. This flexible section is typically where the failure comes from, leading to vacuum leak engine codes, rough idle, and increase fuel consumption. 

When you upgrade to a Turner silicone intake boot you get a perfect fit that will not only outlast the OE design (meaning any vacuum leaks and rough idle), while also smoothing out airflow within the intake tract. This boot also eliminates the factory intake resonator giving your engine a much more aggressive sound under the hood especially at higher rpm. Available in black or Turner blue color, our intake boot offers either a pop of color or a cohesive, complementary look in your engine bay.

The Turner Motorsport silicone intake boot is manufactured with 5 layers of wire reinforced silicone to prevent collapse under load. Engineered in-house utilizing 3D scanning technology, this boot offers perfect fitment with the factory air box and either single stage or three stage (high output N52) intake manifolds.

Install as a standalone reliability improvement or in addition to our three stage intake manifold and Turner performance tune (available here).

Replaces OE intake boot 13717536004.

Features:

• 5 layers of wire reinforced silicone
• Perfect fitment with factory airbox
• Compatible with single stage or three stage manifold
• Installation hardware included

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i Coupe Convertible
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

• Adds up to 10+ Horsepower
• Dramatic sound improvement
• Super fast install and removal
• Improves throttle response 
• Retains OEM airbox base as a heat shield
• Retains OEM cold air ducting
• Looks great under the hood
• Cleanable and reusable filter
• Made in the USA

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

This Euro air intake is less restrictive than the stock intake and also allows much easier acces to the air filter from the top. In addition, this airbox uses a cylinder style filter instead of a standard square filter for higher flow. 

The MAF sensor from your original airbox will need to be reused as the connector in the Euro box is a small 2-pin connector.

GENUINE BMW INTAKE MUFFLER.

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Looking to improve your intake without having to tear apart your engine bay? Then this drop-in performance air filter may be the perfect option for you! Allowing for much higher and easier air flow than the stock BMW filter, this filter allows your engine to breathe much easier at any RPM, freeing up horsepower and torque that normally would have been locked away.

Thanks to the direct replacement style of this filter, no modifications need to be made to the intake components. Just pull out your old filter, place this filter in the stock location, and enjoy!

AFE Summer Rebate Form

This Stage 2 Sealed Intake produces up to 12hp and 16lbs. x ft. torque and outflows the factory intake by 56%. Fully enclosed in a molded plastic housing. this air intake system features a reusable air filter that improves airflow for increased horsepower and torque. The housing features auxiliary inlet duct for better airflow as well as a black vacuum formed plastic cover that provides ready access to the filter for servicing. This intake system also features a insulated molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance.

This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System.

In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.

Features:
Powdercoated heat shield
Polished short ram tubing
+11hp/10ftlbs.

Kit Includes:
Short ram intake piping
Heat shield 
SuperNano Dry Web Dry Filters
Mounting hardware
Instructions

This part fits the following BMWs:
2007-2011 BMW 328I (E90/92/93) 
2008-2013 BMW 128I (E82/88) 
2006 BMW 325I AND 330I (E90) 

If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe.

In addition, this pipe also includes a Tial BOV flange for easy installation of a Tial BOV without any modifications needed to the chargepipe. This is perfect for someone looking to upgrade a tuned or heavily modified N54!

Specs and Features:

• Aluminum Construction
• Black Powder Coating
• 3" Diameter
• Tial BOV Flange
• CNC Machined Throttle Body Flange
• Dual 1/8" NPT Bungs
• High Pressure T-Bolt Clamps
• All Required Installation Hardware

O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.

The ECS Kohlefaser Luft-Technik (Carbon Fiber Air Technology) intake for the 135/335/535 is a beautifully crafted dual-cone intake with a glossy carbon fiber enclosure. Developed in-house using ECS's chassis dyno and state of the art laser scanning and 3D CAD technology, the N54 carbon airbox is a direct replacement for the stock system. Laser scanning allows ECS to produce a finished product that is a perfect fit to the engine bay. All tubing is also made from carbon fiber with each piece designed for optimal flow. The carbon fiber sandwiches a special heat-blocking fiberglass core, insulating the air box from engine bay heat. All of this combines to produce more power and torque over a wider RPM range - up to 13ft-lbs and 18hp when combined with a Cobb software tune, FMIC, and exhaust. And it looks amazing every time you open the hood.

135/335/535 ECS Carbon intake features -

• Designed and engineered using CAD technology for optimal flow and fitment
• Dyno proven power and torque gains backed with real-world testing
• Washable/reusable high flow cotton filters (pre-oiled)
• Stainless steel hardware
• Direct replacement for stock air box; integrates seamlessly with stock intake piping
• Beautiful and functional carbon fiber/e-fiberglass construction

If you already have the ECS open cone filter for you N54 car then this is the perfect add-on upgrade for your system to really clean up the engine bay and keep your cone filters much cleaner. When you upgrade to the enlcosed filter kit your filters will be surrounded more more consistent cold air and by protecting the filter from engine bay dirt you are reducing the risk of air flow problems from build up.

The ECS Kohlefaser Luft-Technik (Carbon Fiber Air Technology) intake for the 135/335/535 is a beautifully crafted dual-cone intake with a glossy carbon fiber enclosure. Developed in-house using ECS's chassis dyno and state of the art laser scanning and 3D CAD technology, the N54 carbon airbox is a direct replacement for the stock system. Laser scanning allows ECS to produce a finished product that is a perfect fit to the engine bay. All tubing is also made from carbon fiber with each piece designed for optimal flow. The carbon fiber sandwiches a special heat-blocking fiberglass core, insulating the air box from engine bay heat. All of this combines to produce more power and torque over a wider RPM range - up to 13ft-lbs and 18hp when combined with a Cobb software tune, FMIC, and exhaust. And it looks amazing every time you open the hood.

Features:

• Designed and engineered using CAD technology for optimal flow and fitment
• Stainless steel hardware
• Direct replacement for stock air box; integrates seamlessly with stock intake piping
• Beautiful and functional carbon fiber/e-fiberglass construction