BMW Drivetrain Parts for BMW 1 Series E82 (2008-2013)

Schwaben Telescoping Round Mirror

10X Entries Into Our F80 M3 Sweepstakes

T#:366811

Part#: 010772SCH01A

In Stock

Sale - Save 25% $ 22.99

This product was last offered at the strikethrough price on
05-02-2026

$ 17.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 22.99

This product was last offered at the strikethrough price on
05-02-2026

$ 17.24 USD

Add to Wish List

Great for working in tight spacers when you can't get a good eye on the issue.

Twin Mass Flywheel - With Hardware

10X Entries Into Our F80 M3 Sweepstakes

T#:15744057

Part#: 112275207060-KT

In Stock

$ 848.99 USD

Add to Wish List

Qty

$ 848.99 USD

Add to Wish List

How it works: Dual (or twin) mass flywheels are made of two separate flywheel disks separated by a friction ring, and coupled through torsion dampers: springs and planetary gear sets. Transmitting drive from the engine to the transmission through vibration dampers isolates crankshaft torsion spikes, reducing transmission gear rattle, gear selection effort, and synchronizer wear. Failed dual mass isolation springs and gears cause noise and vibration. Includes new pilot bearing as well as 8 OEM flywheel bolts and Schwaben's hard-to-find T60 torx socket for removal and installation of flywheel bolts.

Show More Show Less

Genuine BMW Clutch Delay Valve Upgrade - E82/88 E9X F12

Performance upgrade, featuring faster clutch actuation. For vehicles with manual transm...

Performance upgrade, featuring faster clutch actuation. For vehicles with manual transmission only.

T#:49182

Part#: 21522283914

In Stock

15% off MSRP $ 21.10

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.99 USD

Add to Wish List

Qty

15% off MSRP

$ 21.10

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17.99 USD

Add to Wish List

This clutch delay valve upgrade is a Genuine BMW delete for non-m models. This upgrade removes the restriction of the typical delay valve and allows for quicker clutch engagement and a direct feel from the clutch. This is a cheaper alternative to many aftermarket options on the market.

Show More Show Less

Transmission Mount

2X Entries Into Our F80 M3 Sweepstakes

T#:377308

Part#: 22316771219

In Stock

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

With bad transmission mounts, excessive vibration and noise is transferred to the cabin. The rubber in the mounts wear out over time and cause too much movement in the drivetrain. Replace them when wear is detected to keep everything tight.

Show More Show Less

Rear Wheel Bearing Nut

We Price Match - Give Us A Call or Chat!

T#:5045

Part#: 33411132565

In Stock

$ 7.99

This product was last offered at the strikethrough price on
04-16-2026

$ 6.11 USD

Add to Wish List

Qty

$ 6.11 USD

Add to Wish List

This is the nut for the rear wheel bearing that threads onto the rear axle shaft.

This item fits the following BMWs:
2008+ E82 BMW 128i
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci
2006+ E90 BMW 325i 328i
2006+ E91 BMW 328i
2007+ E92 BMW 328i
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si

Show More Show Less

Manual Transmission Service Kit - E82 1M Coupe

10X Entries Into Our F80 M3 Sweepstakes

T#:31125688

Part#: TMSE821MMTKT

In Stock

$ 98.99 USD

Add to Wish List

Qty

$ 98.99 USD

Add to Wish List

The oil in your manual transmission is extremely vital to the life of your transmission. Over time it will begin to break down, lose viscosity, and begin to allow excess heat and friction. This kit is the perfect remedy to this problem. Included are 2 Liters of Redline DCTF transmission fluid, which is recommended by Redline for this manual transmission and features a fully synthetic base for better protection and wear resistance, and Genuine BMW fill and drain plugs.

Show More Show Less

Manual Transmission Service Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15777313

Part#: 23117531356-KT

In Stock

$ 99.99

This product was last offered at the strikethrough price on
08-04-2026

$ 94.99 USD

Add to Wish List

Qty

$ 94.99 USD

Add to Wish List

Does your BMW have a gritty feel when you shift gears? Does your transmission seem less engaging under spirited driving? Over time your factory manual transmission fluid will break down and offer less than stellar protection, which is bad news for your transmission and your driving pleasure. Make sure your BMW offers you the ultimate driving experience.

Show More Show Less

Differential Input Shaft Seal - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:49335120

Part#: 33121213949

In Stock

$ 18.99

This product was last offered at the strikethrough price on
07-27-2026

$ 15.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 18.99

This product was last offered at the strikethrough price on
07-27-2026

$ 15.99 USD

Limited Qty Sale

Add to Wish List

Replaces cracked or hardened valve body seals

Elring Selector Shaft Seal - E36, E39, E46, E36 Z3

2X Entries Into Our F80 M3 Sweepstakes

T#:340660

Part#: 23121222677

In Stock

$ 5.14 USD

Add to Wish List

Qty

$ 5.14 USD

Add to Wish List

Rubber seals are often hardened and damaged by excessive heat and constant temperature changes causing them to become brittle and crack or split. If your seal has split, replace it with a new Elring seal for long reliability and to prevent further problems.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW's:
E36, E39, E46, E36 Z3

Show More Show Less

Genuine BMW Driveshaft Torx Screw With Ribs 26117571956

T#:7675

Part#: 26117571956

In Stock

22% off MSRP $ 9.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.09 USD

Add to Wish List

Qty

22% off MSRP

$ 9.13

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.09 USD

Add to Wish List

Genuine BMW Torx Screw With Ribs - M10X23-10-Zns3
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E46,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E90,E92,E93

Manual Transmission Service Kit

T#:31125686

Part#: E821MMTKT

In Stock

$ 134.99

This product was last offered at the strikethrough price on
07-15-2026

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Shifter Repair Kit - Each

T#:55245795

Part#: 2511143XKT

In Stock

$ 13.04 USD

Add to Wish List

Qty

$ 13.04 USD

Add to Wish List

Tighten up your track day or spirited street shifts with this Genuine BMW Selector Rod refresh kit.

Shifter Linkage Hardware Kit

T#:55209907

Part#: 25111KT

In Stock

$ 8.91 USD

Add to Wish List

Qty

$ 8.91 USD

Add to Wish List

This kit ensures your shift linkage stays safely secured and firmly engaged through every hard shift.

Complete Performance Polyurethane Differential And Subframe Bushing S...

10X Entries Into Our F80 M3 Sweepstakes

T#:56038061

Part#: E9XSBFRDFFBKT2

In Stock

$ 491.99 USD

Add to Wish List

Qty

$ 491.99 USD

Add to Wish List

This complete upgrade package is designed to put an end to steering slop. Utilizing a high performance 95A durometer polyurethane formulation, this kit replaces the mushy OEM rubber with proven rigidity.

Show More Show Less

Shifter Hardware Refresh Kit

T#:55209911

Part#: 2511122KT

In Stock

$ 5.27 USD

Add to Wish List

Qty

$ 5.27 USD

Add to Wish List

This Genuine BMW Manual Shift Selector Rod Hardware Kit includes the exact factory-spec shims and securing clips needed to safely lock down your shift linkage.

Universal Short Shifter V3 - Self Centering - Black Reverse Button Wi...

10X Entries Into Our F80 M3 Sweepstakes

T#:55317707

Part#: IRPUSSKT2

In Stock

$ 552.99 USD

Add to Wish List

Qty

$ 552.99 USD

Add to Wish List

Stop guessing where the gate is. Upgrade your connection to the machine and drive your BMW the way it was meant to be driven.

Wheel Bearing Kit - Rear - E8x, E9x

10X Entries Into Our F80 M3 Sweepstakes

T#:56363344

Part#: 33416762317

Ships in 1 Business Day

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Our Rear Wheel Bearing Service Package pairs top tier OEM and aftermarket replacement parts to completely restore your rear wheel hub integrity. Built around a heavy duty FAG rear wheel bearing, this kit includes an SKF retaining ring and a heavy-duty Febi axle nut so you can service your rear upright with confidence.

Show More Show Less

Bavarian Autosport Hub Adapter With Hub Puller Slide Hammer Adapter A...

10X Entries Into Our F80 M3 Sweepstakes

T#:56254753

Part#: B8800120KT2

In Stock

$ 177.99 USD

Add to Wish List

Qty

$ 177.99 USD

Add to Wish List

Combining a heavy duty hub adapter with dedicated slide hammer and impact force screw attachments, this kit is built for serious mechanics and track day drivers who need unyielding strength to get the job done right the first time.

Show More Show Less

N54/N55 BMW Automatic Transmission Cooler - 135 W/Thermostat ...

T#:21045475

Part#: BMS-135-TC-WTH

Ships on Sep 23, 2026

$ 573.00 USD

Add to Wish List

Qty

$ 573.00 USD

Add to Wish List

Everyone knows that heat is the enemy of your automatic transmission. And everyone knows that higher power levels generate more transmission fluid heat. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity fender-mounted air-to-trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs inside the driverside fender providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW E chassis automatic running larger than factory turbos. The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity Fitment: 2008-2013 E81 E82 E87 Coupe and Hatchback 135i 2008-2013 E88 Convertible 135i Compatible with both RHD and LHD vehicles. Not compatible with manual transmissions.

Show More Show Less

Stage 2 Drag Clutch Kit

T#:25075810

Part#: K70526-02-HD-DXD

Ships in 1 Business Day

$ 1,171.99 USD

Add to Wish List

Qty

$ 1,171.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 2 Drag Clutch Kits: Recommended for use on the track with an emphasis on Drag racing. Rated to hold 520lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

OEM Rein DCT Transmission Oil Pump - E82/88 135i, E89 Z4, E9X M3, F10...

2X Entries Into Our F80 M3 Sweepstakes

T#:5718804

Part#: 28107842849

Ships in 3 Business Days

Sale - Save 5% $ 991.99

This product was last offered at the strikethrough price on
08-31-2026

$ 942.39 USD

Add to Wish List

Qty

Sale - Save 5%

$ 991.99

This product was last offered at the strikethrough price on
08-31-2026

$ 942.39 USD

Add to Wish List

Rein OE Dual Clutch Transmission Oil Pump Kit, including OE mounting kit Direct fit OE replacement kit Complete with OE installation kit for ease of installation Failed oil pump may lead to premature failure of clutch & transmission Highest quality standards to avoid re-work and comebacks

Show More Show Less

2.81 Pumpkin With Helical LSD

T#:25573478

Part#: MF-TRS-05E92DKT

Ships in 4 Business Days

$ 2,689.99 USD

Add to Wish List

Qty

$ 2,689.99 USD

Add to Wish List

South Bend Clutch Stage 3 Endurance Clutch Kit

For Vehicles with production date from 2007

T#:14585012

Part#: K70526-02-SS-TZ-

Ships in 1 Business Day

$ 1,171.99 USD

Add to Wish List

Qty

$ 1,171.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 3 Endurance Clutch Kits: Recommended uses are daily and street with an emphasis on Rally and Endurance racing. Rated to hold 540lbs/ft of torque. Featuring a solid-hub center section for use with an aftermarket Single Mass Flywheel

Show More Show Less

Corteco Shaft Seal

For vehicles with production date from 09/2010

T#:592116

Part#: 24317519352

In Stock

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

45x58x7mm

High Performance Gear Oil (GL4+) SAE 75W-90 (20L JUG)

10X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:577975

Part#: 20014

Ships in 1 Business Day

$ 500.99 USD

Add to Wish List

Qty

$ 500.99 USD

Add to Wish List

Turner Motorsport recommends flushing and replacing your manual transmission and differential fluid regularly to ensure proper component wear and prevent costly issues in the future. Refer to your owner's manual for specific intervals for flushing and refill.

Liqui Moly Gear Oil for your BMW

This fully synthetic 75w90 weight gear oil is designed to maintain smooth shifting in your transmission. Its unique multi-viscosity formula provides excellent protection in all weather conditions. Being fully synthetic, it guarantees smoother shifts across all vehicles.

Note: Verify that your application requires GL4 oil. This product meets API GL-4+ specifications.

Show More Show Less

OEM Rein DCT Transmission Fluid Drain Plug - E82/88 E9X F8X F10 F12 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:639081

Part#: 28107842383

Back Ordered

Sale - Save 5% $ 15.99

This product was last offered at the strikethrough price on
08-31-2026

$ 15.19 USD

Add to Wish List

Qty

Sale - Save 5%

$ 15.99

This product was last offered at the strikethrough price on
08-31-2026

$ 15.19 USD

Add to Wish List

Replace your lost or stripped drain plug with a brand new OEM Rein drain plug to prevent leaks and ensure a secure fit.

HD/Race Sprung 6 Pad

T#:14221792

Part#: BM17-HDG6

Ships in 2 Business Days

$ 873.00 USD

Add to Wish List

Qty

$ 873.00 USD

Add to Wish List

BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.

Show More Show Less

ClutchMasters FX250 Stage 2 Complete Clutch Kit w/ Aluminum Flywheel ...

10X Entries Into Our F80 M3 Sweepstakes

T#:41897493

Part#: FW-055-AL250TKT

Ships in 3 Business Days

$ 1,759.99 USD

Add to Wish List

Qty

$ 1,759.99 USD

Add to Wish List

Upgrade your BMW’s driveline with the ClutchMasters FX250 Stage 2 Complete Clutch Kit w/ Aluminum Flywheel and experience the perfect blend of performance, reliability, and everyday usability.

Show More Show Less

BMW B58 N54 N55 Stage 5 Performance Clutch Kit (for SPEC single-mass ...

T#:587559

Part#: SB535-2

In Stock

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

8" Twin Disc Clutch And Flywheel Kit - Twin Solid Ceramic Discs ...

T#:26771698

Part#: XKBM20524-2E

Ships in 2 Business Days

$ 2,619.99 USD

Add to Wish List

Qty

$ 2,619.99 USD

Add to Wish List

The XClutch 8" Twin Disc Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Sprung Solid : Sprung Input Shaft Diameter - 1 3/8" Flywheel Step - +.087mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Track Use Includes Single Mass Flywheel 1 Solid Ceramic Clutch Disc 1 Solid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

Stage 3 Endurance Clutch Kit

For Vehicles with production date from 2007

T#:366990

Part#: K03099SSTZ

Ships in 1 Business Day

$ 1,171.99 USD

Add to Wish List

Qty

$ 1,171.99 USD

Add to Wish List

The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar friction material is used for its unique static to dynamic ratios of friction co-efficients at high energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. This kit uses the same Race Engineered SFI approved pressure plate as stage 3 daily package. Race engineered pressure plates deliver more transmittable torque and stability, longer life and superior thermal resistance. They also deliver noticeably better dynamics through higher clamp load when driving the vehicle to its limits. Stage 3 Endurance Clutch Kits: Recommend usages are Rally, endurance race, clubsport, autocross, street and daily Conservatively rated to hold 540lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

Heavy Duty Rigid 6-Pad Racing Clutch Kit

T#:638840

Part#: BM14-HDR6

Ships in 2 Business Days

$ 865.00 USD

Add to Wish List

Qty

$ 865.00 USD

Add to Wish List

9" Twin Disc Clutch Kit - Solid Carbon Blade Discs

For Vehicles With 6 Bolt Crankshaft (Production Date From 02/09)

T#:17804816

Part#: XKBM23596-2P

Ships in 2 Business Days

$ 3,116.99 USD

Add to Wish List

Qty

$ 3,116.99 USD

Add to Wish List

The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The XClutch carbon series is designed to offer the highest heat capacity and is designed specifically for high horsepower race cars where mass and inertia are critical. The carbon series is designed for motorsport use only. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 26 Disc Material - Carbon Blade Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 1230 Recommended Use - Motorsports only Includes Single Mass Flywheel 2 Solid Carbon Blade Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 1

For Vehicles with Production Date Up to 01/09 with 8 Bolt Crank

10X Entries Into Our F80 M3 Sweepstakes

T#:41931261

Part#: SB53A2STG1KT

Ships in 3 Business Days

$ 1,440.99 USD

Add to Wish List

Qty

$ 1,440.99 USD

Add to Wish List

The ideal solution for BMW owners looking to step up their drivetrain performance without sacrificing everyday usability.

Rear Axle Nut - Rein | 33406799223

2X Entries Into Our F80 M3 Sweepstakes

T#:38229104

Part#: 33406799223

In Stock

Sale - Save 17% $ 6.99

This product was last offered at the strikethrough price on
08-31-2026

$ 5.80 USD

Add to Wish List

Qty

Sale - Save 17%

$ 6.99

This product was last offered at the strikethrough price on
08-31-2026

$ 5.80 USD

Add to Wish List

Rear Axle Nut - Rein | 33406799223 is an essential component for securing the rear axle of your BMW, providing a secure and reliable connection between the axle and wheel hub. Designed for durability and precision, this high-quality rear axle nut is an OEM replacement, ensuring a perfect fit for various BMW models. Whether performing routine maintenance or a full axle replacement, the Rein rear axle nut is a critical part of maintaining the performance and safety of your BMW.

Direct replacement for rear axle nut on various BMW models
OEM part number: 33406799223 for precise fitment
Ensures secure attachment of the rear axle to the wheel hub
Manufactured for durability and long-lasting performance
Helps maintain vehicle safety by securing vital axle components
Easy to install with standard tools, saving time and effort

Show More Show Less

Shifter Ball Bushing

T#:343899

Part#: 25111469397

Ships in 2 Business Days

$ 13.46

This product was last offered at the strikethrough price on
07-02-2026

$ 6.55 USD

Add to Wish List

Qty

$ 6.55 USD

Add to Wish List

Motor Mount Bolt Set

2X Entries Into Our F80 M3 Sweepstakes

T#:592053

Part#: 22110392551

In Stock

Sale - Save 5% $ 16.50

This product was last offered at the strikethrough price on
08-31-2026

$ 15.68 USD

Add to Wish List

Qty

Sale - Save 5%

$ 16.50

This product was last offered at the strikethrough price on
08-31-2026

$ 15.68 USD

Add to Wish List

Used to secure the motor mount brackets, one time use bolts!

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...

2X Entries Into Our F80 M3 Sweepstakes
Universal fitment design - modifications may be necessary to run this cooler

T#:53608839

Part#: 8371

Ships in 3 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

CSF redesigned this cooler and went with a more traditional inlet/outlet orientation. The new single pass design features high efficiency and high durability, but with vertically oriented inlet and outlet connections.

Show More Show Less

9" Twin Disc Clutch Kit - Solid Ceramic Discs

T#:17804818

Part#: XKBM23596-2E

Ships in 10 Business Days

$ 2,239.99 USD

Add to Wish List

Qty

$ 2,239.99 USD

Add to Wish List

The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The twin disc 9" with ceramic friction discs are designed for high horsepower motorsport applications where a high heat and torque capacity is required. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Performance Street Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

BMW Aluminum Bolt

2X Entries Into Our F80 M3 Sweepstakes

T#:46478545

Part#: 23000417164S

In Stock

Sale - Save 15% $ 7.99

This product was last offered at the strikethrough price on
08-31-2026

$ 6.76 USD

Add to Wish List

Qty

Sale - Save 15%

$ 7.99

This product was last offered at the strikethrough price on
08-31-2026

$ 6.76 USD

Add to Wish List

This is a single-use bolt and should be replaced every time it’s removed. Don’t let a major repair come to a halt because you’re missing the proper hardware.

Stage 2 Endurance Clutch Kit

For Vehicles with production date from 2007

T#:25075808

Part#: K7052602HDOCE

Ships in 1 Business Day

$ 948.99 USD

Add to Wish List

Qty

$ 948.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 2 Endurance Clutch Kits: Recommended uses are daily and street with an emphasis on Rally and Endurance racing. Rated to hold 450lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 5

For vehicles with production date up to 01/2009 With 8 Bolt Crankshaft

10X Entries Into Our F80 M3 Sweepstakes

T#:41931275

Part#: SB53A2STG5TKT

Ships in 3 Business Days

$ 1,755.99 USD

Add to Wish List

Qty

$ 1,755.99 USD

Add to Wish List

The SPEC Clutch Kit With Billet Single Mass Flywheel Stage 5 is built for serious BMW performance builders who need the toughest clutch system available—track-tested and competition-ready.

DKM MRX Ceramic Twin-Disc Clutch Kit W/ Flywheel - 215mm - E60 E8X E9...

For vehicles with a production date up to 01/2009 with a 8 bolt flange

T#:5987852

Part#: MRX-006-075

Special Order: No Guaranteed ETA

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

Working in collaboration with Competition Clutch, the up-and-coming German automotive performance company DKM has released a new line of high-quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MRX Twin Ceramic Disc Clutch Kit is designed to hold up to 650 ft/lbs torque capacity and provide you with a much-improved clutch engagement! The two ceramic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Ceramic 215mm Discs Steel Single-Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool Rated for upwards of 650 ft/lbs of torque **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

ClutchMasters 6 Puck Complete Clutch Kit w/ Aluminum Flywheel - FX400...

10X Entries Into Our F80 M3 Sweepstakes

T#:41897498

Part#: FW-055-AL4006TKT

Ships in 3 Business Days

$ 1,778.99 USD

Add to Wish List

Qty

$ 1,778.99 USD

Add to Wish List

For BMW drivers pushing the limits of performance, the ClutchMasters 6 Puck Complete Clutch Kit w/ Aluminum Flywheel – FX400 Stage 4 from Turner Motorsport is the uncompromising solution for race-grade drivability and torque control.

Show More Show Less

9" Twin Disc Clutch And Flywheel Kit - Twin Sprung Carbon Discs ...

For Vehicles with Production Date Up to 01/09 with 8 Bolt Crank

T#:26904953

Part#: XKBM23595-2P

Ships in 2 Business Days

$ 3,116.99 USD

Add to Wish List

Qty

$ 3,116.99 USD

Add to Wish List

The XClutch 9" Twin Disc Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 26 Disc Material - Carbon Disc Type - Sprung Solid : Sprung Input Shaft Diameter - 1 3/8" Flywheel Step - +.087mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Track Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

South Bend Clutch Stage 4 X-Series Clutch Kit

For Vehicles with production date from 2007

T#:14585013

Part#: K70526-02-SS-X-S

Ships in 1 Business Day

$ 1,367.99 USD

Add to Wish List

Qty

$ 1,367.99 USD

Add to Wish List

South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials

Show More Show Less

URO AT Valve Body Seal - BMW E6X E9X E7X Z4

2X Entries Into Our F80 M3 Sweepstakes

T#:15445591

Part#: 24347588724

Ships in 1 Business Day

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

A common part that breaks down and warps with heat from the transmission that can cause transmission fluid leaks.

9" Twin Disc Clutch Kit - Solid Ceramic Discs

T#:17804819

Part#: XKBM20525-2E

Ships in 2 Business Days

$ 2,128.99 USD

Add to Wish List

Qty

$ 2,128.99 USD

Add to Wish List

The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The XClutch 8" solid race clutch consists of a performance flywheel, solid-centered ceramic clutch discs, aluminum cover assembly, release bearing & carrier or internal hydraulic release bearing (HRB). XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7 7/8" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Performance Street Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease Pilot Bearing With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less