BMW Performance Clutch Kits & Parts for BMW 1 Series E82 (2008-2013)

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

• Extra long life street system
• Holding capacity 70% over stock
• Heavy-Duty reinforced pressure plate
• Sprung organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

• Pressure Plate
• Clutch Disc
• Throw-out Bearing
• Pilot Bearing or Bushing
• Alignment Tool
• Pressure Plate Bolts

This clutch kit does not include a flywheel. Requires use of single mass flywheel 

This clutch package is designed for high HP vehicles desiring a start performance similar to O.E. The pressure plate is Race Engineered (SS) and SFI approved with significant load increase over stage 1,2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20%-25%. Discs are assembled with heat-treated wear resistant hubs; drive plates and springs for high load transfer and dependable operation. The sprung centers on the disc in conjunction with the marcel fin between the linings create a dual dampening effect that simulates O.E. start performance. A Performance Organic friction material with a high metal content increases torque and RPM capability and maintains low operating temperatures which reduces wear and glazing.

Stage 3 Daily Clutch Kits:

Recommended usages are daily, spirited street and occasional track
Conservatively rated to hold 500lbs/ft of torque
Featuring a solid-hub center section for use with an OE dual-mass flywheel

This is the stock twin mass flywheel for the N55 engine used in the E82 135i, E9X 335, F3x 335/435, and F10 535i. It's manufactured by OEM supplier LuK. Sachs recommends a new dual mass flywheel (DMF) on every other clutch replacement. There are several indicators for replacing the flywheel: damage to the clutch contact plate (from a severely worn clutch disc), grease leaking from inside (overheating), build-up of clutch material on the contact plate (excessive slipping and overheating), and failure of the internal damping system.

The dampening system uses rubber or coil springs to absorb driveline vibrations. Through age, excessive heat, and aggressive use the rubber loses its resilience and the metal springs lose their strength and become brittle. If the clutch and flywheel have become overheated the internal grease may break down as well. A DMF failure can be massive and catastrophic, not to mention dangerous as bits of metal and rubber fling themselves through the transmission bellhousing. Heat and aggressive driving will accelerate the wear so race and track cars should have their stock flywheels replaced at regular intervals or with any new clutch. Even normal street cars should plan for a new flywheel if it has high mileage.

DMF wear can only be checked with the transmission and clutch removed. If you can rotate the outer flywheel more than 20mm in either direction then it should be replaced.

A new pilot bearing (roller bearing) is included, pre-installed in the flywheel hub.

This item fits the following BMWs with the single turbo N55 engine and manual transmission:
2011-2012 E82 BMW 135i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i - Convertible
2012-2015 F30 BMW 335i 335iX - Sedan
2014-2016 F34 BMW 335iX - Gran Turismo
2014-2016 F32 BMW 435i 435iX - Coupe
2014-2016 F33 BMW 435i 435iX - Convertible
2014-2016 F36 BMW 435i 435iX - Gran Coupe
2011+ F10 BMW 535i 535i xDrive

An excellent performance upgrade so you can enjoy quicker revs and eliminate excess turbo lag. Made of high quality 6061-T6 billet aluminum, with a high-carbon steel replaceable friction surface, this flywheel from Clutch Masters is sure to be a great upgrade for anyone looking to reduce crankshaft drag and increase acceleration.

Typical benefits of a Clutch Masters lightweight flywheel:

• Reduced mass equals increased acceleration
• CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels
• CM uses an OE steel ring gear secured by bolts
• CM offers a limited lifetime warranty
• CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2

The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style.

The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs.

*Does not include flywheel. Requires use of single mass flywheel 

The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style.

The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs.

*This clutch kit does not include a flywheel. Requires use of single mass flywheel 

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.

• FX400 (Stage 4)

• High performance street system

• Holding capacity 70% over stock

• Heavy-Duty reinforced pressure plate

• Hi-Leverage™ pressure ring design

• Sprung hub/cushioned disc

• Steel-backed 6-Puck Ceramic Sprung Disc friction material

*This clutch kit does not include a flywheel. Requires use of single mass flywheel 

T60 head flywheel bolt.

Genuine BMW Isa Screw - M12X1,5X25
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F10,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N51,N52,N52N,N54,N54T,N55,S55
 

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

• Performance Pressure Plate - Increased clamping force and resistant to wear

• Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.