BMW Engine Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Genuine BMW - Corporate Logo
T#:2910
Part#: 12137594937
In Stock
Sale - Save 10% $ 82.89

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.60 USD
Free Shipping
Sale - Save 10%
$ 82.89

This product was last offered at the strikethrough price on
08-26-2026

$ 74.60 USD
Free Shipping
Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the OEM Genuine BMW/Bosch ignition coil that is the current replacement for some BMW 6 and 8-cylinder engines built from the late 2000s and after. It's listed as a replacement coil for N54, N63, S63, and S63TU engines (but may be split into specific model years, see below). BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. This part number replaces previous BMW part numbers 12137571643, 12137562744, and 12137551049.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011-2013 E82 BMW 1M Coupe
2007-2010 E9X BMW 335i 335xi
2007-2010 E60 BMW 535i 535xi
6/2009-2010 E60 BMW 550i
2011+ F10 BMW 550i 550i xDrive M5
6/2009-2011 E63 BMW 650i
2012+ F12 BMW 650i
2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:18733532
Part#: VTT-CRANKHUB-6
Ships in 1 Business Day
Sale - Save 19% $ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 798.99 USD
Free Shipping
Sale - Save 19%
$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 798.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Vargas Ignition Coil Kit (Red) - N5x
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309610
Part#: VTT-COIL-N5X-RED
In Stock
Sale - Save 15% $ 169.99

This product was last offered at the strikethrough price on
09-03-2026

$ 144.49 USD
Free Shipping
Sale - Save 15%
$ 169.99

This product was last offered at the strikethrough price on
09-03-2026

$ 144.49 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less

Genuine BMW - Corporate Logo
T#:33521
Part#: 11257559434
In Stock
Sale - Save 8% $ 121.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 112.23 USD
Free Shipping
Sale - Save 8%
$ 121.99

This product was last offered at the strikethrough price on
08-26-2026

$ 112.23 USD
Free Shipping


Genuine BMW Repair Kit Piston Rings - (0)
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less

Vargas Ignition Coil Kit (Blue) - N5x
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309605
Part#: VTT-COIL-N5X-BLU
In Stock
Sale - Save 15% $ 169.99

This product was last offered at the strikethrough price on
09-03-2026

$ 144.49 USD
Free Shipping
Sale - Save 15%
$ 169.99

This product was last offered at the strikethrough price on
09-03-2026

$ 144.49 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:7530039
Part#: VACUUMCANRAW
In Stock
Sale - Save 15% $ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD
Free Shipping
Sale - Save 15%
$ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620
Show More Show Less

VTT N54 Vacuum Pump Block Off Plate
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:11497328
Part#: VTT-N54-VACUUM-B
Ships in 10 Business Days
Sale - Save 15% $ 127.99

This product was last offered at the strikethrough price on
09-03-2026

$ 108.37 USD
Free Shipping
Sale - Save 15%
$ 127.99

This product was last offered at the strikethrough price on
09-03-2026

$ 108.37 USD
Free Shipping
Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand
Show More Show Less
Genuine BMW - Corporate Logo
T#:42219
Part#: 13537576771
Ships in 1 day
Sale - Save 8% $ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.05 USD
Free Shipping
Sale - Save 8%
$ 83.99

This product was last offered at the strikethrough price on
08-26-2026

$ 77.05 USD
Free Shipping


Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less

VTT Billet BMW Crankcase Breather - Screw In - BMW N54 N55 3.0L ...
2X Entries Into Our F80 M3 Sweepstakes
FOR MODELS WITH VTT BILLET VALVE COVER ONLY
Vargas Turbo Technologies - Corporate Logo
T#:38924625
Part#: VTT-CRANKBREATHE
In Stock
Sale - Save 15% $ 127.99

This product was last offered at the strikethrough price on
09-03-2026

$ 108.79 USD
Free Shipping
Sale - Save 15%
$ 127.99

This product was last offered at the strikethrough price on
09-03-2026

$ 108.79 USD
Free Shipping
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. This breather can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including most aftermarket oil catch can systems! The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.
Show More Show Less

VTT BMW N54 “DI Injector” Delete Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:11497326
Part#: VTT-N54-DI-DELET
Ships in 1 Business Day
Sale - Save 15% $ 339.99

This product was last offered at the strikethrough price on
09-03-2026

$ 288.99 USD
Free Shipping
Sale - Save 15%
$ 339.99

This product was last offered at the strikethrough price on
09-03-2026

$ 288.99 USD
Free Shipping
Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets​ Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
Ships in 3 Business Days
New Item
Sale - Save 15% $ 31.99

This product was last offered at the strikethrough price on
09-03-2026

$ 27.19 USD
Free Shipping
Sale - Save 15%
$ 31.99

This product was last offered at the strikethrough price on
09-03-2026

$ 27.19 USD
Free Shipping
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.
Genuine BMW - Corporate Logo
T#:32906
Part#: 11237574827
In Stock
Sale - Save 8% $ 98.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 91.25 USD
Free Shipping
Sale - Save 8%
$ 98.99

This product was last offered at the strikethrough price on
08-26-2026

$ 91.25 USD
Free Shipping


Genuine BMW Hub -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less


N54 Spline Lock Crank Hub Solution With Complete Package
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:18733525
Part#: VTT-CRANKHUB-3
Ships in 3 Business Days
Sale - Save 15% $ 939.99

This product was last offered at the strikethrough price on
09-03-2026

$ 798.99 USD
Free Shipping
Sale - Save 15%
$ 939.99

This product was last offered at the strikethrough price on
09-03-2026

$ 798.99 USD
Free Shipping
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:7530037
Part#: VACUUMCANBLK
In Stock
Sale - Save 15% $ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD
Free Shipping
Sale - Save 15%
$ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620
Show More Show Less
Genuine BMW - Corporate Logo
T#:180999
Part#: 11417618941
Ships in 1 day
Sale - Save 8% $ 94.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.85 USD
Free Shipping
Sale - Save 8%
$ 94.99

This product was last offered at the strikethrough price on
08-26-2026

$ 87.85 USD
Free Shipping


Genuine BMW Guide Rail -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Genuine BMW - Corporate Logo
T#:45473
Part#: 16147229173
In Stock
Sale - Save 23% $ 417.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 320.90 USD
Free Shipping
Sale - Save 23%
$ 417.99

This product was last offered at the strikethrough price on
05-02-2026

$ 320.90 USD
Free Shipping
If this unit has failed, the fuel pump will no longer operate properly. Replace it to restore proper operation and get your BMW back on the road.

Genuine BMW Control Unit For Fuel Pump -
This item fits the following BMW Chassis:
E70 X5,E71,E82,E89 Z4,E90,E92,E93

Fits BMW Engines including:
M57,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Boost pressure solenoid
For vehicles with production date from 06/2012
Genuine BMW - Corporate Logo
T#:177074
Part#: 11747649407
In Stock
Sale - Save 10% $ 204.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 184.99 USD
Limited Qty Sale
Free Shipping
Sale - Save 10%
$ 204.99

This product was last offered at the strikethrough price on
08-26-2026

$ 184.99 USD
Limited Qty Sale
Free Shipping


Genuine BMW Pressure Converter -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30

Fits BMW Engines including:
N55

Show More Show Less
Genuine BMW - Corporate Logo
T#:190752
Part#: 12427611316
In Stock
Sale - Save 8% $ 191.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 176.83 USD
Free Shipping
Sale - Save 8%
$ 191.99

This product was last offered at the strikethrough price on
08-26-2026

$ 176.83 USD
Free Shipping


Genuine BMW Cable Alternator-Starter-Base B+ -
This item fits the following BMW Chassis:
E82,E90,E92,E93

Fits BMW Engines including:
N55


Vargas Turbo Technologies - Corporate Logo
T#:18733531
Part#: VTT-CRANKHUB-5
Ships in 10 Business Days
Sale - Save 15% $ 880.99

This product was last offered at the strikethrough price on
09-03-2026

$ 748.84 USD
Free Shipping
Sale - Save 15%
$ 880.99

This product was last offered at the strikethrough price on
09-03-2026

$ 748.84 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Genuine BMW - Corporate Logo
T#:14966
Part#: 13627566786
In Stock
Sale - Save 8% $ 158.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 146.51 USD
Free Shipping
Sale - Save 8%
$ 158.99

This product was last offered at the strikethrough price on
08-26-2026

$ 146.51 USD
Free Shipping


Genuine BMW Ping Sensor
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N54,N54T,N55,S55

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5122266
Part#: VTTFILTERCAPCLR
Ships in 1 Business Day
Sale - Save 15% $ 89.99

This product was last offered at the strikethrough price on
09-03-2026

$ 76.49 USD
Free Shipping
Sale - Save 15%
$ 89.99

This product was last offered at the strikethrough price on
09-03-2026

$ 76.49 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5122267
Part#: VTTFILTERCAPBLUE
Ships in 2 Business Days
Sale - Save 15% $ 89.99

This product was last offered at the strikethrough price on
09-03-2026

$ 76.49 USD
Free Shipping
Sale - Save 15%
$ 89.99

This product was last offered at the strikethrough price on
09-03-2026

$ 76.49 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
Genuine BMW - Corporate Logo
T#:42220
Part#: 13537576772
In Stock
Sale - Save 8% $ 83.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.05 USD
Free Shipping
Sale - Save 8%
$ 83.99

This product was last offered at the strikethrough price on
08-26-2026

$ 77.05 USD
Free Shipping


Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122280
Part#: TRIPLECAPRED1
Ships in 9 Business Days
Sale - Save 15% $ 209.99

This product was last offered at the strikethrough price on
09-03-2026

$ 178.49 USD
Free Shipping
Sale - Save 15%
$ 209.99

This product was last offered at the strikethrough price on
09-03-2026

$ 178.49 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less


Genuine BMW - Corporate Logo
T#:35386
Part#: 11427563713
In Stock
Sale - Save 5% $ 194.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 184.99 USD
Limited Qty Sale
Free Shipping
Sale - Save 5%
$ 194.99

This product was last offered at the strikethrough price on
05-02-2026

$ 184.99 USD
Limited Qty Sale
Free Shipping

Perfect replacement for damaged or leaking oil pipe return line.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.


Genuine BMW Oil Pipe Outlet
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T
 

 

Show More Show Less
Genuine BMW Fuel Injector - N55 N20
For vehicles with production date from 01/2011
Genuine BMW - Corporate Logo
T#:42780
Part#: 13647597870
In Stock
Sale - Save 8% $ 372.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 341.99 USD
Limited Qty Sale
Free Shipping
Sale - Save 8%
$ 372.99

This product was last offered at the strikethrough price on
08-03-2026

$ 341.99 USD
Limited Qty Sale
Free Shipping

Replace your clogged or malfunctioning fuel injector with this Genuine BMW injector to restore proper engine idling and running conditions.


Genuine BMW Injector -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F36

Fits BMW Engines including:
N20,N26,N55
 

 

Show More Show Less
Genuine BMW - Corporate Logo
T#:12891
Part#: 11127565284
In Stock
Sale - Save 8% $ 639.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 591.85 USD
Free Shipping
Sale - Save 8%
$ 639.99

This product was last offered at the strikethrough price on
08-25-2026

$ 591.85 USD
Free Shipping
  • All-in-one valve cover overhaul
  • Preventative replacement saves time and trouble later on
  • Includes new oil separator and check valve systems
  • Replace valve cover gaskets before a leak becomes worse
  • Replace valve cover before it cracks

BMW equipped the twin-turbo N54 engine with a plastic, not metal, valve cover (like with its N51 and N52 cousins). As we have seen over time the plastic can crack which leads to oil leaks, excessive oil blow-by, vacuum leaks, poor running, and other issues. Unfortunately, it's not just the gasket that needs periodic replacement but the entire valve cover itself. This kit includes a new valve cover, gaskets, and hardware. The valve cover also incorporates the oil separator and check valves which are not a replaceable item on its own. So a complete valve cover replacement will tackle multiple problem areas at once.

Cracked Valve Cover. The plastic used for the N54 valve cover is thin and weak in certain spots. This makes it prone to hairline or larger cracks that will leak oil and cause vacuum leaks. You might also notice rough running especially at idle and fault codes for fuel trim. Often a technician will go looking for a failed ignition coil, spark plug, or failed vacuum hose on the engine. But without a fault code to assist in diagnosis this can often mean wasted time and money. A cracked valve cover is a new problem area that many techs don't think to check. And the problems are more prevalent on modifed engines running more boost.

Oil Separator/Crankcase Vent. BMW integrated the oil separator system into the valve cover on these later engines. An internal manifold creates a cyclone effect and centrifugal force separates vapor from the liquid oil. The liquid oil is supposed to drain through the valve cover and back to the oil pan while the remaining vapor is burned up during combustion. It's a very efficient and environmentally-friendly design with very few moving parts. Unfortuntely it's not perfect and eventually the internal passageways will become clogged. This problem is made worse in cars that have short drive cycles, sit for long periods of time, do not have frequent oil changes, do not see regular runs to redline, and cars in freezing climates. If the engine never reaches optimal operating temp the oil remains in liquid form or becomes sludge. This is bad news for the entire engine, leading to excessive oil blow-by, fouled spark plugs, rough running and misfires and even premature failure of catalytic converters and oxygen sensors. Since the oil separator system in the valve cover is not available on its own, and cleaning it is nearly impossible, the complete replacement of the valve cover is the only option. Other oil vent tubes and vacuum hoses are also recommended to get replaced at the same time.

Valve Cover Gaskets. As with any rubber part, failures occur when the rubber becomes dry and brittle. The pliable rubber no longer forms a seal between the cylinder head and valve cover where it will develop an oil leak. Valve cover gaskets that leak can allow oil to seep into the spark plug holes and contaminate ignition coil boots and plugs. That can lead to rough running and misfires. A new valve cover includes new gaskets.

All new hardware is included to avoid re-using and over-tightening the original bolts (they have a very low torque rating).

Replacement requires accessing the rear of the engine with a lot of the upper plastic shrouding removed. The metal fuel line must also be removed and disconnected from the fuel injectors. Professional installation is encouraged if you have never done this kind of work before. Serious DIY types should have a Bentley Service Manual to use which greatly explains the process. You may also want to combine this work with the oil filter housing gasket replacement.

There is no maintenance or replacement interval for the N54 valve cover. However, we have seen cracks and other failures in the 50,000-90,000 mile range. Our best advice is to plan on a major top end overhaul around the 70-80,000 mile mark. There's no mechanical downside to replacing it as prevention and it will make the engine run better and last longer.

This item fits the following BMWs (with twin turbo N54 engine):
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2007-2010 E60 BMW 535i 535xi 535i xDrive
2008-2010 E71 BMW X6 xDrive35i
2009-2010 Z4 BMW Z4 sDrive35i Z4 sDrive35is
Show More Show Less

Genuine BMW - Corporate Logo
T#:36027
Part#: 11537558900
In Stock
Sale - Save 15% $ 121.47

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.25 USD
Free Shipping
Sale - Save 15%
$ 121.47

This product was last offered at the strikethrough price on
05-14-2026

$ 103.25 USD
Free Shipping

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.


Genuine BMW Pipe, Return, Cooling For Turbocharger - Zyl. 1-3
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T
 

 

Show More Show Less

Genuine BMW - Corporate Logo
T#:36028
Part#: 11537558901
In Stock
Sale - Save 25% $ 145.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.09 USD
Free Shipping
Sale - Save 25%
$ 145.99

This product was last offered at the strikethrough price on
08-26-2026

$ 109.09 USD
Free Shipping

Feeds coolant to the turbo system.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.


Genuine BMW Pipe, Supply, Cooling For Turbocharger - Zyl. 4-6
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

 

Show More Show Less
Genuine BMW - Corporate Logo
T#:36030
Part#: 11537558903
In Stock
Sale - Save 18% $ 115.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 95.68 USD
Free Shipping
Sale - Save 18%
$ 115.99

This product was last offered at the strikethrough price on
05-02-2026

$ 95.68 USD
Free Shipping


Genuine BMW Pipe, Return, Cooling For Turbocharger - Zyl. 4-6
This item fits the following BMW Chassis:
E82 1M Coupe,E82

Fits BMW Engines including:
N54,N54T

Show More Show Less

Genuine BMW - Corporate Logo
T#:12985
Part#: 11427562798
In Stock
Sale - Save 15% $ 147.33

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 124.99 USD
Limited Qty Sale
Free Shipping
Sale - Save 15%
$ 147.33

This product was last offered at the strikethrough price on
05-02-2026

$ 124.99 USD
Limited Qty Sale
Free Shipping

Perfect replacement for damaged or leaking oil pipe feed line.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.


Genuine BMW Oil Pipe Inlet
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T
 

 

Show More Show Less
Genuine BMW - Corporate Logo
T#:20451
Part#: 81292208037
In Stock
Sale - Save 8% $ 85.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 78.99 USD
Limited Qty Sale
Free Shipping
Sale - Save 8%
$ 85.59

This product was last offered at the strikethrough price on
08-18-2026

$ 78.99 USD
Limited Qty Sale
Free Shipping

This adapter can be used with the valve blaster tool for the N54 engine to aid in the maintenance of the valves.

 

Genuine BMW STRAHL-ABSAUGADAPTER

 


Vargas Oil Feed Adapter - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51778141
Part#: VTT-N54-OFA
Ships in 10 Business Days
New Item
Sale - Save 15% $ 41.99

This product was last offered at the strikethrough price on
09-03-2026

$ 35.69 USD
Free Shipping
Sale - Save 15%
$ 41.99

This product was last offered at the strikethrough price on
09-03-2026

$ 35.69 USD
Free Shipping
The Vargas Oil Feed Adapter is designed to replace the stock front turbo oil feed line with a robust, CNC-machined solution.

Genuine BMW - Corporate Logo
T#:36026
Part#: 11537558899
In Stock
Sale - Save 25% $ 159.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
Sale - Save 25%
$ 159.99

This product was last offered at the strikethrough price on
08-26-2026

$ 119.99 USD
Free Shipping

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.


Genuine BMW Pipe, Supply, Cooling For Turbocharger - Zyl. 1-3
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T
 

 

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122281
Part#: TRIPLECAPCLR1
Ships in 10 Business Days
Sale - Save 15% $ 249.99

This product was last offered at the strikethrough price on
09-03-2026

$ 212.49 USD
Free Shipping
Sale - Save 15%
$ 249.99

This product was last offered at the strikethrough price on
09-03-2026

$ 212.49 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less
N55 Stage 1 Turbo Upgrade
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:398009
Part#: N55-STG1
Ships in 10 Business Days
Sale - Save 12% $ 1,545.99

This product was last offered at the strikethrough price on
06-15-2026

Starting at $ 1,353.44 USD
Free Shipping
Sale - Save 12%
$ 1,545.99

This product was last offered at the strikethrough price on
06-15-2026

Starting at $ 1,353.44 USD
Free Shipping

Vargas Stage 1 N55 turbo upgrade is good up to 425whp with proper tuning and high grade fuel. Vargas N55 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N55.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 425. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:5122265
Part#: VTTFILTERCAPRED
In Stock
Sale - Save 15% $ 89.99

This product was last offered at the strikethrough price on
09-03-2026

$ 76.49 USD
Free Shipping
Sale - Save 15%
$ 89.99

This product was last offered at the strikethrough price on
09-03-2026

$ 76.49 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:18733527
Part#: VTT-CRANKHUB-2
Ships in 10 Business Days
Sale - Save 15% $ 871.99

This product was last offered at the strikethrough price on
09-03-2026

$ 741.19 USD
Free Shipping
Sale - Save 15%
$ 871.99

This product was last offered at the strikethrough price on
09-03-2026

$ 741.19 USD
Free Shipping
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Vargas Ignition Coil Kit (Black) - N5x
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309609
Part#: VTT-COIL-N5X-BLK
Ships in 10 Business Days
Sale - Save 15% $ 167.99

This product was last offered at the strikethrough price on
09-03-2026

$ 142.79 USD
Free Shipping
Sale - Save 15%
$ 167.99

This product was last offered at the strikethrough price on
09-03-2026

$ 142.79 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5122279
Part#: TRIPLECAPBLK1
Ships in 10 Business Days
Sale - Save 15% $ 220.99

This product was last offered at the strikethrough price on
09-03-2026

$ 187.84 USD
Free Shipping
Sale - Save 15%
$ 220.99

This product was last offered at the strikethrough price on
09-03-2026

$ 187.84 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less

Spline Lock Crank Hub Solution W/ Hardware Package - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:18733526
Part#: VTT-CRANKHUB-4
Ships in 10 Business Days
Sale - Save 15% $ 880.99

This product was last offered at the strikethrough price on
09-03-2026

$ 748.84 USD
Free Shipping
Sale - Save 15%
$ 880.99

This product was last offered at the strikethrough price on
09-03-2026

$ 748.84 USD
Free Shipping
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
BMW N55 Stage 1 Turbo Install Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:15677573
Part#: VTT-N55-INSTL-2
Ships in 10 Business Days
Sale - Save 15% $ 74.99

This product was last offered at the strikethrough price on
09-03-2026

$ 63.74 USD
Free Shipping
Sale - Save 15%
$ 74.99

This product was last offered at the strikethrough price on
09-03-2026

$ 63.74 USD
Free Shipping
Includes gaskets and O-rings necessary to install your new N55 turbo! If you need studs, manifold gaskets, downpipe gasket, and copper nuts, see T#398463 for the full install kit

Vargas Turbo Technologies - Corporate Logo
T#:5122264
Part#: VTTFILTERCAPBLK
Ships in 10 Business Days
Sale - Save 15% $ 89.99

This product was last offered at the strikethrough price on
09-03-2026

$ 76.49 USD
Free Shipping
Sale - Save 15%
$ 89.99

This product was last offered at the strikethrough price on
09-03-2026

$ 76.49 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:7530038
Part#: VACUUMCANRED
In Stock
Sale - Save 15% $ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD
Free Shipping
Sale - Save 15%
$ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620
Show More Show Less

135i/535i VTT N54 F-RB+ Turbocharger Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:26504936
Part#: VTT-N54-FRB
Ships in 10 Business Days
Sale - Save 15% $ 3,599.99

This product was last offered at the strikethrough price on
09-03-2026

$ 3,059.99 USD
Free Shipping
Sale - Save 15%
$ 3,599.99

This product was last offered at the strikethrough price on
09-03-2026

$ 3,059.99 USD
Free Shipping

Vargas Turbo Technologies - Corporate Logo
T#:19395579
Part#: VTTCRANKHUBPKG
Ships in 10 Business Days
Sale - Save 15% $ 934.99

This product was last offered at the strikethrough price on
09-03-2026

$ 794.74 USD
Free Shipping
Sale - Save 15%
$ 934.99

This product was last offered at the strikethrough price on
09-03-2026

$ 794.74 USD
Free Shipping
VTT is proud to offer the only complete N54 complete crank hub solution that does NOT require the crank to be drilled for pins. Our hub uses our proprietary “Spline Lock” technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). We spent many months testing, and retesting this design, utilizing well over 10 different samples to come to our final production version. During testing, our final hub managed to break our testing rig before slipping. These have been bench tested, and real-world tested on the VTT N54 race car spinning 8K RPM and making well over 900WHP. This technology means our hub installs the same as a stock hub, no drilling of the crank, which means MUCH less labor is involved and is reversible is ever wanting to be uninstalled leaving no holes in the crank. The “Spline Lock” is ONLY available with the VTT Crank bolt capture for the ULTIMATE Crank Hub solution for your BMW. These parts are designed to be used together, and the spline lock should not run without the CBC VTT “Spline Lock” Crank hubs are CNC manufactured from 440C tool Steel with a Rockwell rating of HRC60 for the ultimate in durability, and toughness. Hub Plus OEM bolt OEM Oil pump sprocket OEM oil sprocket retainer VTT Crank bolt capture
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:22394048
Part#: VTTN54VCOCCBLK
Ships in 10 Business Days
Sale - Save 15% $ 2,129.99

This product was last offered at the strikethrough price on
09-03-2026

$ 1,810.49 USD
Free Shipping
Sale - Save 15%
$ 2,129.99

This product was last offered at the strikethrough price on
09-03-2026

$ 1,810.49 USD
Free Shipping
This convenient kit from Vargas includes everything you need, saving you the hassle of sourcing specific fittings for your valve cover-catch can setup. Spend less time searching and more time enjoying your upgraded system!
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships in 10 Business Days
New Item
Sale - Save 15% $ 37.99

This product was last offered at the strikethrough price on
09-03-2026

$ 32.29 USD
Free Shipping
Sale - Save 15%
$ 37.99

This product was last offered at the strikethrough price on
09-03-2026

$ 32.29 USD
Free Shipping
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.


Genuine BMW - Corporate Logo
T#:31465
Part#: 11127570780
In Stock
Sale - Save 8% $ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 104.80 USD
Free Shipping
Sale - Save 8%
$ 113.99

This product was last offered at the strikethrough price on
08-26-2026

$ 104.80 USD
Free Shipping


Genuine BMW Screening, Ignition Coil -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F25 X3

Fits BMW Engines including:
N55

Show More Show Less
Genuine BMW - Corporate Logo
T#:14980
Part#: 13627593624
In Stock
Sale - Save 8% $ 410.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 380.11 USD
Free Shipping
Sale - Save 8%
$ 410.99

This product was last offered at the strikethrough price on
08-26-2026

$ 380.11 USD
Free Shipping


Genuine BMW Hot-Film Air Mass Meter -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F25 X3,F26 X4

Fits BMW Engines including:
N52N,N55

Show More Show Less