BMW Engine Parts for BMW 1 Series E82 (2008-2013)

E82 135i N54 Stage 2+ Turner Power Package

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340219

Part#: TMS224340

Ships in 8 Business Days

Starting at $ 2,630.84 USD

Add to Wish List

Starting at $ 2,630.84 USD

Add to Wish List

2008 E82 135i N54 Stage 2+ Power Package (for race-use only)
Peak Power Gain*: up to 125hp / 158ft-lbs
+ aFe Pro5R Dual Cone Intake
+ CP-E Catless Downpipes
+ Wagner or AA Front Mount Intercooler
+ Cobb AccessPort programmer

For a 135i race or competition car, the exhaust is an important area for upgrades. Removing the catalytic converters eliminates a choke point in the exhaust system and will free up power and torque. It also eliminates the cats as a potential failure point - a broken up cat can clog the exhaust and severly damage your motor. These cat-less DP from CP-E are some of the best we have seen. They are made from 304 stainless steel mandrel-bent piping. The flow characteristics of the piping was especially important to maximize the efficiency of the turbos. With less restriction the turbos work more efficiently and last longer.

In this package we also address the shortcomings in the factory intercooler setup. With higher boost comes more heat in the intake air and the factory intercooler does a poor job of cooling that air before it enters the engine. In the Stage 2+ package we offer multiple intercooler upgrades in increasing levels of capacity - Wagner Evo I, Wagner Evo II, and Active Autowerke Race FMIC. Each is a significant upgrade over the stock 135i FMIC. The Wagner Evo I is our standard FMIC upgrade and fits with the stock piping and requires no modification for fitment. The Wagner Evo II has greater cooling capacity and silicone piping to the stock intake. Some minor modification to plastic trim pieces is required for installation. The AA Race FMIC is the biggest and most extensive that we sell. It features a ram-air effect thanks to a special shroud around the intercooler. The installation is more extensive because AA has chosen to locate the FMIC where it will catch the most airflow from the car's frontal area.

The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 2+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 2+ package lines up with the Cobb Stage 2+ tuning maps for an intake and DP (91 or 93+ octane fuel). Simply download the Stage 2+ race map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving among Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

* Note that peak power gains are quoted remain the same as Stage 2 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak. Adding a full exhaust (from the DP) will make this a Stage 3 kit in the Cobb tuning catalog.

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and either e-mailed or faxed to Turner Motorsport before shipping. You can download the waiver here.

This item fits the following BMWs:
2008-2010 E82 BMW 135i (N54 engine)

Show More Show Less

Supertech Titanium Valve Retainers - Intake - Sold Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21604319

Part#: RET-BMN54-TI

Ships in 8 Business Days

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

7 Degree - 5mm valve stem - Single or Tripe Groove Valves

GENIUS 2 Bank 6 Volt / 12 Volt 4A Battery Charger - NOCO

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1135809

Part#: GENIUS2X2

Ships in 8 Business Days

20% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

Qty

20% off MSRP

$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

The GENIUS2X2 represents a leap forward in power, performance, energy efficiency, and compactness. This advanced charger is a dual-bank system designed for both 6-volt and 12-volt batteries, serving as a charger, maintainer, trickle charger, and battery desulfator all in one. With a rating of 4 amps (2 amps per bank), it caters to all types of lead-acid and lithium-ion batteries, including flooded, gel, AGM, marine, and deep-cycle variants.

Features:

A two-bank battery charger maintainer rated a 4-amps - 2-amps per bank with a 40Ah capacity range - designed to charge and maintain multiple vehicles like cars, motorcycles, boats, ATVs, RVs, lawnmowers, lawn tractors, trucks, and more.
Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
It's not just a trickle charger; it's an advanced battery maintainer. A fully automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Pump Filter Sock

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38128034

Part#: 125-190

Ships in 1-2 days

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Perfect for vehicle owners looking to maintain their vehicle’s fuel system integrity, this Walbro Pump Filter Sock replacement is a reliable upgrade for optimal driving performance.

Performance Conical Valve Spring - Sold Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21604306

Part#: SPR-FE20BE-2

Ships in 8 Business Days

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 84 @ 37 Open Pressure: 157 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm Rate: 7.25

Show More Show Less

Supertech Titanium Valve Retainers - Exhaust - Sold Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21604320

Part#: RET-BMN54-TE

Ships in 8 Business Days

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

7 Degree - 6mm valve stem - Single or Tripe Groove Valves

Performance Conical Valve Spring - Set Of 24

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21604325

Part#: SPR-FE20BE-2-24

Ships in 8 Business Days

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 84 @ 37 Open Pressure: 157 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm Rate: 7.25

Show More Show Less

GENIUS 4 Bank 6 Volt / 12 Volt 8A Battery Charger - NOCO

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1135810

Part#: GENIUS2X4

Ships in 8 Business Days

20% off MSRP $ 249.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.99 USD

Add to Wish List

Qty

20% off MSRP

$ 249.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.99 USD

Add to Wish List

The GENIUS2X4 represents a pinnacle of power, performance, energy efficiency, and compactness in our lineup. This advanced charger features four banks for both 6-volt and 12-volt batteries, serving as a charger, maintainer, trickle charger, and battery desulfator. With an impressive 8-amp rating (2 amps per bank), it caters to all lead-acid and lithium-ion battery types, including flooded, gel, AGM, marine, and deep-cycle variants.

Features:

A four-bank battery charger maintainer rated a 8-amps - 2-amps per bank with a 40Ah capacity range - designed to charge and maintain multiple vehicles like cars, motorcycles, boats, ATVs, RVs, lawnmowers, trucks, and more.
Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
It's not just a trickle charger; it's an advanced battery maintainer. A fully automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Supertech Single Groove Intake Valve - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14783497

Part#: BMIVN-1055S

Ships in 8 Business Days

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm

Performance Conical Valve Spring - Set Of 24

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21604324

Part#: SPR-FE20BE-24

Ships in 8 Business Days

$ 471.99 USD

Add to Wish List

Qty

$ 471.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 75 @ 37 Open Pressure: 155 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm Rate: 8 OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm

Show More Show Less

GENIUS PRO 6 Volt / 12 Volt / 24 Volt 25A Battery Charger - NOCO ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641141

Part#: GENIUSPRO25

Ships in 8 Business Days

20% off MSRP $ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.99 USD

Add to Wish List

Qty

20% off MSRP

$ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.99 USD

Add to Wish List

The GENIUSPRO25 is a fully-automatic professional smart charger, maintainer, power supply, and battery desulfator designed for 6-volt, 12-volt, and 24-volt systems. With temperature compensation and a 25-amp rating, it's suitable for all types of automotive, marine, and deep-cycle batteries.

Features:

The all-new GENIUSPRO25 - Similar to our G15000, just more powerful. With the greatest performance and functionality yet, it's a world-class battery charger to let professionals push the limits at incredible charging speeds.
Do more with Genius - A multi-voltage charger - 6-volt (25-amps), 12-volt (25-amps), and 24-volt (12.5-amps) - for lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion.
Engineered for pros - Designed for pros who need absolute performance and uncompromising functionality. Featuring ultra-flexible silicone cabling - down to -40ºC - with protective nylon breaded shielding for maximum protection against abrasion.
Progressive power supply - A dual-voltage power supply - 12-volt (25-amp) and 24-volt (12.5-amp) - to maintain constant power delivery without unwanted ripple, noise, and transient spikes during ECU flashing, reprogramming, and diagnostic testing.
Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates to maximize battery life and enable fast charging.
Charge dead batteries - Detects batteries as low as 1-volt. Or use the all-new force mode that allows you to manually begin charging dead batteries down to zero volts.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Intake Valve Set - Black Nitride - Oversize

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21505755

Part#: BMIVN-1054S-1KT

Ships in 8 Business Days

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 31.9mm (+0.5mm) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Bremmen Oil Cooler Gasket - BMW N20 N54 N55 S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640547

Part#: 11428637820

Ships in 9 Business Days

Sale - Save 24% $ 13.99

This product was last offered at the strikethrough price on
05-03-2026

$ 10.60 USD

Add to Wish List

Qty

Sale - Save 24%

$ 13.99

This product was last offered at the strikethrough price on
05-03-2026

$ 10.60 USD

Add to Wish List

This gasket is known to leak from time to time and can cause an unforeseen oil loss. Change it as soon as you spot a leak to prevent damage or failure. Replaces BMW part numbers: 11428637820, 11427525335

Show More Show Less

Black Walnut Shell 20/30 Blast Media

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22690744

Part#: B1100051

Ships in 8 Business Days

Sale - Save 20% $ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD

Add to Wish List

This blast media makes DIY carbon cleaning a breeze!

Swivel Fuel Line Fitting AN6 PTFE To AN6 ORB

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094346

Part#: 201-0175

Ships in 10 Business Days

$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Upgrade your fluid system with a reliable, Precision Raceworks AN-6 PTFE fitting to AN-6 ORB, designed for maximum efficiency and ease of installation.

AN6 Male Flare/ORB To 3/8" Female Quick Connect

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094330

Part#: 201-0206

Ships in 10 Business Days

$ 26.99

This product was last offered at the strikethrough price on
01-22-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 3/8" Female Quick Connect is a premium fitting designed for fluid and fuel systems. The AN6 male flare/ORB fitting ensures a secure, leak-proof connection with an O-ring boss design. The 3/8" female quick-connect fitting enables fast, tool-free disconnections and reconnections, making it perfect for high-performance setups that require both reliability and quick access.

Show More Show Less

9.89mm To 7.89mm Fuel Line Fitting 90 Degree Double Quick Connect ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094341

Part#: 201-0182

Ships in 10 Business Days

$ 36.99

This product was last offered at the strikethrough price on
01-22-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Engineered for seamless fuel system integration, this precision-machined 90-degree fitting is designed with a 7.89mm female quick connect on one end and a 9.89mm female quick connect on the other. Built for maximum convenience, it features an air hose-style quick connect system, ensuring effortless, secure connections without the need for special tools.

Show More Show Less

PTFE AN6 Fitting To Male AN6 ORB

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094327

Part#: 201-0237

Ships in 10 Business Days

$ 15.99

This product was last offered at the strikethrough price on
01-22-2026

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

The Precision Raceworks PTFE AN6 fitting to male AN6 ORB is a premium component designed for high-performance fuel and fluid systems. The PTFE AN6 fitting provides a secure connection to a PTFE hose, offering superior durability and resistance to heat, pressure, and chemicals. The male AN6 ORB fitting features an O-ring boss design, guaranteeing a leak-proof, reliable connection in demanding applications.

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 3.5 (Kit Only) - BMW ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22130453

Part#: 622-0046

Ships in 10 Business Days

$ 799.99 USD

Add to Wish List

Qty

$ 799.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Precision Raceworks Fuel Pump Expansion Modules - Stage 3.5 w/ Boost ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38195438

Part#: 622-0245

Ships in 10 Business Days

$ 434.99 USD

Add to Wish List

Qty

$ 434.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450, Walbro 525, or Walbro 535 fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant. NOTE: This module requires the customer to already own a stage 2 or 2.5 Precision Raceworks Pump Stage 3.5 (6.4 liters per minute) - The Stage 3.5 pump module adds a Walbro 525 pump to your existing PR Stage 2 or 2.5 kit. This upgrade module will include all necessary hardware and wiring to upgrade your pump to a stage 3.5 or 3.75. Once combined with your existing kit, this pump combination can support up to 1,100whp* (Rated for 950whp on 100% E85).

Show More Show Less

Precision Raceworks - Dummy Ethanol Sensor 3/8" Male QC To 3/8" Male ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094347

Part#: 201-0232

Ships in 10 Business Days

$ 16.99

This product was last offered at the strikethrough price on
01-26-2026

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Whether upgrading your fuel system for performance or simply eliminating unnecessary components, this fitting provides an efficient and reliable way to enhance your fuel delivery setup by removing your ethanol sensor

Show More Show Less

Black Market Parts Multi-Port Injection Kit - No Injectors - BMW N54/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38262760

Part#: 601-0227

Ships in 10 Business Days

$ 429.99 USD

Add to Wish List

Qty

$ 429.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 3.75...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38195446

Part#: 601-0064

Ships in 10 Business Days

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running an ethanol blend. Bring your fuel system up to par with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 3.75 bucketless fuel pump kit includes a Walbro 535 (F90000295) primary and a Walbro 525 (F90000285) secondary fuel pump, capable of supporting up to 1200whp on 93 octane pump gas or 1000whp on 100% E85, and is the perfect modular pump to get you started! Since Precision Raceworks is always looking ahead, they have designed their modular bucketless fuel pump to allow you to upgrade your fuel pump as needed!

Show More Show Less

Inline Fuel Filter AN8 Single In/Out - 10 Micron | Precision Racework...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161699

Part#: 501-0113

Ships in 10 Business Days

$ 157.99

This product was last offered at the strikethrough price on
01-22-2026

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks is a high-performance fuel filtration solution designed for BMW and other high-performance applications. This inline fuel filter ensures superior filtration, protecting your engine from contaminants that can compromise fuel system performance.

Crafted from high-quality billet aluminum, the filter body is precision-machined for durability and reliability. Featuring AN8 female ORB fittings on each end, this universal-fitment filter integrates seamlessly into custom fuel setups, making it ideal for both street and track applications.

Precision-machined billet aluminum construction – Ensures strength, durability, and long-lasting performance
AN8 female ORB fittings – Compatible with a wide range of fuel system setups
High-flow filtration – Effectively removes contaminants to protect fuel injectors and engine components
Universal fitment – Ideal for custom fuel system configurations in BMW and other performance vehicles
Corrosion-resistant anodized finish – Provides excellent protection against fuel and environmental factors
Reliable and efficient fuel delivery – Supports high-performance and racing applications

Note: Mounting hardware is not included.

Ensure clean and efficient fuel delivery with the Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks, engineered for high-performance reliability.

Show More Show Less

PTFE Fuel Line Fitting 180 Degree AN-6 Female Flare

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094332

Part#: 201-0264

Ships in 10 Business Days

$ 29.99

This product was last offered at the strikethrough price on
01-22-2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Precision Raceworks PTFE Fuel Line Fitting 180-Degree AN-6 Female Flare is a high-quality component engineered for optimal fuel system routing. Its 180-degree design enables smooth, compact hose placement in confined spaces. The AN-6 female flare connection ensures a tight, leak-proof seal, while its PTFE compatibility offers superior resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 3 (Kit Only) - BMW E-...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27338719

Part#: 622-0022

Ships in 10 Business Days

$ 724.99 USD

Add to Wish List

Qty

$ 724.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 3.5 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38195445

Part#: 601-0063

Ships in 10 Business Days

$ 624.99 USD

Add to Wish List

Qty

$ 624.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running an ethanol blend. Bring your fuel system up to par with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 3.5 bucketless fuel pump kit includes a single Walbro 450 (F90000274) primary fuel pump and a single Walbro 525 (F90000285) secondary fuel pump, capable of supporting up to 1150whp on 93 octane pump gas or 975whp on 100% E85, and is the perfect modular pump to get you started! Since Precision Raceworks is always looking ahead, they have designed their modular bucketless fuel pump to allow you to upgrade your fuel pump as needed!

Show More Show Less

Precision Raceworks Fuel Pump Expansion Modules - Stage 3.5 (Upgrades...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38195435

Part#: 601-0072

Ships in 10 Business Days

$ 374.99 USD

Add to Wish List

Qty

$ 374.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450, Walbro 525, or Walbro 535 fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant. NOTE: This module requires the customer to already own a stage 2 or 2.5 Precision Raceworks Pump Stage 3.5 (6.4 liters per minute) - The Stage 3.5 pump module adds a Walbro 525 pump to your existing PR Stage 2 or 2.5 kit. This upgrade module will include all necessary hardware and wiring to upgrade your pump to a stage 3.5 or 3.75. Once combined with your existing kit, this pump combination can support up to 1,100whp* (Rated for 950whp on 100% E85).

Show More Show Less

AN6 PTFE To 3/8" Female Quick Connect

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094343

Part#: 201-0180

Ships in 10 Business Days

$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

This high-quality fitting is designed for seamless integration with an ethanol content sensor or a 3/8" male quick disconnect.

3/8" PTFE AN6 To Female Swivel QC With 1/8" NPT Port

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094342

Part#: 201-0241

Ships in 10 Business Days

$ 36.99

This product was last offered at the strikethrough price on
01-22-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Upgrade your fuel system or fuel lines with this premium AN-6 PTFE fitting, enhancing reliability and performance for your build.

Wire With Terminals For 90 Degree 6 Pin Bulkhead - Black - Dual 18 Ga...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161710

Part#: 201-0362

Ships in 10 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Black in color and 18 Gauge dual wire.

Precision Raceworks AN6 Return Port For In-Tank Regulator-Filter V2 -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161742

Part#: 622-0269

Ships in 10 Business Days

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Convert your return-less Precision Raceworks V2 E9X/E8x In-Tank Regulator / Filter assembly to a return system. Simply swap out the regulator that came with Precision Raceworks' in tank filter regulator for this fitting and pair it with any regulator system with a return and connect to the AN6 ORB port on this fitting. When used with an engine-bay-located regulator and Precision Raceworks' high flow in tank filter/regulator assembly, it allows the tank filter regulator to really shine, providing the highest flow and most stable fuel pressures the E9x/E8x community has ever seen. This kit includes Precision Raceworks' 5 Bar static micro fuel regulator. This regulator is the simplest way to move your fuel pressure regulation to the engine bay, requiring no adjustment or vacuum lines. 5 Bar is typically the recommended pressure for most BMW applications

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 4 (Kit Only) - BMW E-...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37993459

Part#: 622-0047

Ships in 10 Business Days

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

N54 Replacement Spark Plug Wire - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29500063

Part#: 501-0077

In Stock

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

Precision Raceworks AN6 Return Port For In-Tank Regulator-Filter V2 -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161741

Part#: 622-0268

Ships in 10 Business Days

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Convert your return-less Precision Raceworks V2 E9X/E8x In-Tank Regulator / Filter assembly to a return system. Simply swap out the regulator that came with Precision Raceworks' in tank filter regulator for this fitting and pair it with any regulator system with a return and connect to the AN6 ORB port on this fitting. When used with an engine-bay-located regulator and Precision Raceworks' high flow in tank filter/regulator assembly, it allows the tank filter regulator to really shine, providing the highest flow and most stable fuel pressures the E9x/E8x community has ever seen. This kit includes Precision Raceworks' 4 Bar static micro fuel regulator. This regulator is the simplest way to move your fuel pressure regulation to the engine bay, requiring no adjustment or vacuum lines.

Show More Show Less

Precision Raceworks AN6 Return Port For In-Tank Regulator-Filter V2 -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161744

Part#: 622-0271

Ships in 10 Business Days

$ 354.99 USD

Add to Wish List

Qty

$ 354.99 USD

Add to Wish List

Convert your return-less Precision Raceworks V2 E9X/E8x In-Tank Regulator / Filter assembly to a return system. Simply swap out the regulator that came with Precision Raceworks' in tank filter regulator for this fitting and pair it with any regulator system with a return and connect to the AN6 ORB port on this fitting. When used with an engine-bay-located regulator and Precision Raceworks' high flow in tank filter/regulator assembly, it allows the tank filter regulator to really shine, providing the highest flow and most stable fuel pressures the E9x/E8x community has ever seen. This kit features Precision Raceworks' Adjustable Fuel Regulator with a 1-to-1 Boost Reference. This combination is the ultimate solution for all builds, supporting any pressure level you may need. This also supports connecting a vacuum line to your intake manifold or charge pipe to utilize a 1:1 boost reference to increase your fuel pressure as boost pressure increases.

Show More Show Less

Precision Raceworks Bucketed Performance Fuel Pump - Stage 4 - BMW E-...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38195441

Part#: 601-0114

Ships in 10 Business Days

$ 1,549.99 USD

Add to Wish List

Qty

$ 1,549.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. Our Stage 4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump boasts dual Walbro 450 (F90000274) fuel pumps in bucket and a third Walbro 450 (F90000274) fuel pump outside the bucket. This pump can support OVER 1,300whp* (Rated for 1150whp on 100% E85) making it capable of handling anything you can throw at it!

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 3.75 v2 (Kit Only) - ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37993458

Part#: 622-0137

Ships in 10 Business Days

$ 868.99 USD

Add to Wish List

Qty

$ 868.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Precision Raceworks Fuel Pump Expansion Modules - Stage 4 (Upgrades S...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38195436

Part#: 601-0013

Ships in 10 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450, Walbro 525, or Walbro 535 fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant. NOTE: This module requires the customer to already own a stage 2, 2.5, or 3 Precision Raceworks Pump

Show More Show Less

Bucketed High Performance Fuel Pump Kit - Stage 2.5 v2 (Kit Only) - B...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37993460

Part#: 601-0075

Ships in 10 Business Days

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant.

Show More Show Less

Precision Raceworks PTFE Fuel Line Fitting - AN-6 To 7.89mm Female QC...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094320

Part#: 201-0178

Ships in 10 Business Days

$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

he Precision Raceworks PTFE Fuel Line Fitting is a 180-degree AN-6 female flare fitting designed for high-performance fuel systems.onstructed from durable PTFE material, it ensures compatibility with various automotive applications.his universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. *Features:** **AN-6 Compatibility:** Designed to connect AN-6 male flare fittings to AN-6 female flare fittings at a 180-degree angle. **Durable Construction:** Made from high-quality PTFE material for enhanced durability and resistance to fuel additives. **Universal Fitment:** Suitable for a wide range of vehicle platforms, offering flexibility in fuel line routing. **High-Performance Design:** Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. or more information, visit the product page:citeturn0search0

Show More Show Less

Wire With Terminals For 90 Degree 6 Pin Bulkhead (Black) 12 Gauge ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161711

Part#: 201-0360-BLK

Ships in 10 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Black in color and 12 Gauge.

9.49 (3/8") PTFE AN6 90 Degree Fitting To Female QC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094339

Part#: 201-0227

Ships in 10 Business Days

$ 31.99

This product was last offered at the strikethrough price on
01-22-2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Upgrade your fuel system with the Precision Raceworks 90-degree fitting, and experience the convenience of air hose-style quick connects for efficient and easy-to-manage fuel system setups.

2 Piece Radiator Hose Removal Pick Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5403216

Part#: HRP100

Ships in 10 Business Days

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Pick sets are perfect for separating hoses and clips.

Wire With Terminals For 90 Degree 6 Pin Bulkhead (Green)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161687

Part#: 201-0361-GRN

Ships in 10 Business Days

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Green in color and 18 Gauge.

Precision Raceworks Fuel Pump Expansion Modules - Stage 3 (Upgrades S...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38195434

Part#: 601-0012

Ships in 10 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85. All pump options below include Genuine Walbro 450, Walbro 525, or Walbro 535 fuel pump(s) capable of flowing up to 350% more fuel than the factory fuel pump and all options are 100% E85 compliant. NOTE: This module requires the customer to already own a stage 2 or 2.5 Precision Raceworks Pump Stage 3 (5.65 liters per minute) - The Stage 3 bucketed module will add a 450 pump to your existing PR Stage 2 or 2.5 kit. This will include all necessary hardware and wiring to upgrade your pump to a stage 3 and support up to 1000whp* (Rated for 875whp on 100% E85)

Show More Show Less

PTFE AN6 Fitting To Male AN6 Flare

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38094326

Part#: 201-0243

Ships in 10 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

A PTFE AN6 fitting to male AN6 flare is commonly used in fuel or fluid systems. The PTFE AN6 fitting ensures a secure connection to a PTFE hose, offering superior resistance to heat, pressure, and chemicals. The male AN6 flare fitting provides a tight, leak-proof seal, ideal for high-performance applications that require dependable, durable connections.

Show More Show Less

Wire With Terminals For 90 Degree 6 Pin Bulkhead - Orange

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161698

Part#: 201-0360-ORG

Ships in 10 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Orange in color and 12 Gauge.

Black Market Parts OEM Fuel Pump Connector (With Terminals) - BMW E9X...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38195420

Part#: 101-0124

Ships in 10 Business Days

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

The Black Market Parts (by Precision Raceworks) OEM FUEL PUMP CONNECTOR WITH TERMINAL SET is made with plastics and metals compatible with E85. This connector is the same connector you will find on factory E9X/E8X fuel pumps. This OEM connector is perfect for the customer looking to make their own fuel pump and wants direct wire without additional connections.

Show More Show Less

Wire With Terminals For 90 Degree 6 Pin Bulkhead (White)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38161693

Part#: 201-0360-WHT

Ships in 10 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. White in color and 12 Gauge.

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results