BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 1 Series E82 (2008-2013)

Lightweight cat-back featuring an exotic exhaust note. Designed for the perfect blend of performance and functionality!

Prepare to give your 1 series the boost it deserves. This cat-back exhaust was made to redefine the driving experience of your 135. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust- flow and tuned exhaust note, we are very excited to get these exhausts on 135's everywhere, don't wait!

Featured on the ECS Tuning YouTube Channel! - CLICK HERE FOR SOUND CLIPS! -

When crafting the ECS exhaust systems, their primary focus is on achieving the perfect balance of sound and comfort. ECS's understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. The exhaust for your 135 incorporates this balance, offering a strageic blend of sportiness and practicality. Drawing from their extensive experience, particularly with N55 cars like the E9x series, they have engineered an exhaust packed with innovative features, compatible with both factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.

There is something about a cat-back exhaust that is just so good. Being able to unbolt and replace the entire visible exhaust gives you butterflies in your stomach. A fresh new exhaust and just knowing that things are about to get rowdy. This exhaust features twin 2.5" brushed pipes with flanges that bolt directly to your factory and aftermarket down-pipes. The dual 2.5" mid-pipes make their way toward the rear axle and converge into a single 3" exhaust section. The 3" exhaust section snakes through the rear section of the car making smooth dips and curves to make its way into a light-weight 3" turbo style muffler. Don't be fooled by the 135 muffler, the size is nothing but deceiving. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both tone and volume. Paired with the 3" muffler is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.

Although both N54 and N55 share identical exhaust geometry, the N55 mid-pipes do not feature secondaries. Though the N55 cat-back is compatible with N54 downpipes this is not suggested. Supposedly this N55 catback sounds absolutely glorious on an N54, even with aftermarket downpipes.

Features and Benefits:

Street/Motorsport inspiration
Enhanced exhaust note
Full exhaust replacement
25% lighter than stock!
Stock cat-back: 56lbs
ECS cat-back: 42lbs
Reduction in back pressure for increased throttle response, TQ, and HP
Dual 3.5" fitted exhaust tips
Part Design:

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout
Dual 2.5" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:

Dual 2.5" mid-pipes
3" Rear exhaust section
3.0" free-flowing muffler section for better sound, and performance
Clamps and Hardware for an OEM+ install
Optional 3.5" ECS exhaust tips

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the longest and best performance for the price.

This is the OEM Bosch oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 490mm bank 2 oxygen sensor is mounted after the catalytic converter.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the the longest and best performance for the price.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - Up to 08/2013

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the longest and best performance for the price.

This is the OEM Bosch oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 560mm bank 1 oxygen sensor is mounted after the catalytic converter.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

The Dinan sport muffler is designed to compliment the 135i and not overpower the driver and passengers with harsh tones. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Dual 3.5" stainless tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan sport muffler is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
2008-2013 E82 E88 BMW 135i

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!

Other Features Include:

3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Revamp your BMW's exhaust aesthetics with the ECS Tuning "Ti.22" Titanium Exhaust Tips, known for their remarkable attractiveness in the market. These exhaust tips showcase a stunning matte titanium finish and a slant-cut, single-wall outlet design, elevating your vehicle's appearance. Engineered for durability, they feature chrome-plated nuts, a 304SS cap screw, and clamp.

Key Benefits:

• Eye-catching matte titanium finish for enhanced aesthetics
• Slant-cut, single-wall outlet for a stylish look
• Durable construction with chrome-plated nuts and 304SS cap screw
• Universal fitment for various vehicles but may require modification for proper installation

Note: Modification might be necessary for proper fitment. This part offers UNIVERSAL fitment and may not directly fit your vehicle. Measuring before ordering is necessary.

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp