Shock Mount Kits for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

If you are replacing your shocks, be sure to change the mount as well. This simple step will not only increase the life of your new shocks, but will help to restore lost comfort and agility, As factory bushings age, the will begin to crack and split. Turner Motorsport carries Genuine BMW mounts as well as high quality aftermarket alternatives.

Sub-Categories

Sort By:
Rear Shock Mounts (RSM) - Lower + Upper - OEM Rubber - E82, E9X (not M) (Pair)
Rear Shock Mounts (RSM) - Lower + Upper - OEM Rubber - E82, E9X (not ...
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:11953
Part#: E9X-REAR-MOUNTS
Ships in 4 Business Days
Sale - Save 3% $ 96.91

This product was last offered at the strikethrough price on
08-28-2026

$ 93.71 USD
Free Shipping
Add to Wish List
Sale - Save 3%
$ 96.91

This product was last offered at the strikethrough price on
08-28-2026

$ 93.71 USD
Free Shipping
Add to Wish List
A 5-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1-series and E90/E91/E92/E93 3-series consist of 4 pieces -
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
In addition, there is a lower shock mount to locate the shock to the suspension (installs on spring arm), 33526768544.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 5 pieces.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less
Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair)
Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:11986
Part#: E9X-URSM
In Stock
Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 2%
$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
Add to Wish List
A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less
1-series Strut/Shock Mount Kit - E82 128i, 135i
1-series Strut/Shock Mount Kit - E82 128i, 135i
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:11958
Part#: E82MOUNTKIT
Ships in 4 Business Days
Sale - Save 2% $ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 165.35 USD
Free Shipping
Add to Wish List
Sale - Save 2%
$ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 165.35 USD
Free Shipping
Add to Wish List
Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

Included in the E82 1-series Mount Kit:
  • front upper strut mounts (also known as a guide support), 31306775098
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
  • rear lower shock mount (installs on spring arm), 33526768544
    Buy as a package and save $!!

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i - Coupe
    2008-2012 E88 BMW 128i 135i - Convertible
    • Show More Show Less
    Turner Motorsport Spherical Rear Upper Shock Mounts - E9x E8x non-M
    Turner Motorsport Spherical Rear Upper Shock Mounts - E9x E8x non-M ...
    10X Entries Into Our F80 M3 Sweepstakes
    Improve shock efficiency and increase shock travel on lowered BMWs!
    Turner Motorsport - Corporate Logo
    T#:556649
    Part#: 010019TMS01
    In Stock
    $ 352.99 USD
    Free Shipping
    Add to Wish List
    $ 352.99 USD
    Free Shipping
    Add to Wish List
    No matter whether your E9x or E8x is N52, N54, or N55 powered, your rear upper shock mounts (33506771738) will fail. We set out to design the ultimate performance spherical monoball rear upper shock mount, and we believe we have exactly that. Our monoball rear upper shock mounts eliminate any unwanted deflection, maximizing shock efficiency and performance - this means full body shock body articulation, reducing side loading and improving shock wear. Our Turner Motorsport rear upper shock mounts also offer flexibility in shock position - our kit enables you to either raise your shock position by 7.5mm or lower it by 4.5mm. We recommend running the raised 7.5mm for increased shock travel on lowered vehicles. On the other hand, if you're looking to retain bump stops, washers, and shock boots, you can run the 4.5mm lowered shock position. NOTE: You may experience a slight increase in NVH when using our monoball rear upper shock mounts, but we think it is justified by the eliminated deflection and setup flexibility offered by this kit. Design features: Billet CNC 6061-T6 aluminum, type III anodized for exceptional durability and corrosion resistance Teflon lined spherical bearing Self-lubricating PTFE liners are chemically bonded to the inner diameter of the race to offer a very high load-carrying capacity with greatly increased dynamic wear characteristics. Bearing inserts are CNC machined 1144 steel, heat treated and melonite coated Maximize ball articulation while offering exceptional durability and corrosion resistance Static Axial Load Rating: 10,800 lbs. Rod End Misalign Angle: 6 degrees Fully rebuildable Made in USA!
    Show More Show Less
    OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (not EDC) (Pair)
    OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:11954
    Part#: TMS11954
    In Stock
    Sale - Save 2% $ 49.12

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 48.01 USD
    Free Shipping on orders $49 and up
    Add to Wish List
    Sale - Save 2%
    $ 49.12

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 48.01 USD
    Free Shipping on orders $49 and up
    Add to Wish List
    A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

    Rear Shock Mount (RSM) Kit consists of:
    A. rear upper-top shock mounts, 33506771737
    B. rear upper-middle shock mounts, 33506767010
    C. rear upper-bottom shock mounts, 33506771738
    D. rear upper supporting cup, 33526764418 (sits over bumpstop)
    The lower mount on the 1M/M3 is integrated on the shock absorber.

    That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

    This item fits the following BMWs:
    2011-2012 E82 BMW 1M
    2008-2011 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
    Show More Show Less
    OEM Rein Front Upper Strut Mount - E60/61 E82/88 E9X
    OEM Rein Front Upper Strut Mount - E60/61 E82/88 E9X
    2X Entries Into Our F80 M3 Sweepstakes
    Rein - Corporate Logo
    T#:379735
    Part#: 31306775098
    In Stock at Vendor
    Sale - Save 5% $ 84.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 80.74 USD
    Free Shipping
    Add to Wish List
    Sale - Save 5%
    $ 84.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 80.74 USD
    Free Shipping
    Add to Wish List
    Should be replaced each time shocks are replaced due to this being a wearing item on most BMWs.
    Turner Monoball Race Lower Rear Shock Mount - Pair - E88, E82, E9X
    Turner Monoball Race Lower Rear Shock Mount - Pair - E88, E82, E9X ...
    10X Entries Into Our F80 M3 Sweepstakes
    Turner Motorsport - Corporate Logo
    T#:552860
    Part#: 024572TMS03
    In Stock
    Sale - Save 10% $ 382.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 344.69 USD
    Free Shipping
    Add to Wish List
    Sale - Save 10%
    $ 382.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 344.69 USD
    Free Shipping
    Add to Wish List

    Rubber mounts in any position of a vehicle are usually designed with comfort and longevity in mind leaving performance as a sacrifice. This kind of sacrifice here at Turner just won't do, so we did what we do best and designed a solid monoball mount.

    Our engineering team first wanted to tackle the issue with wear found on rubber mounts. Due to their combination of steel, rubber, and low mounting location, these mounts are a direct target for deterioration and failure. As they are positioned out in the open and exposed to the elements, bonded steel and rubber components inevitably hold moisture, separating as the steel bearing begins to rust. Our solution was to offer a rebuildable mount with a Teflon lined bearing for increased durability, combined with a blue anodized body and melonite coated bushing sleeves for corrosion resistance.

    The performance side of these mounts is primarily found in the articulation allowed by the bearing. Rubber mounts do not allow for proper free damper movement, hindering shock performance. By eliminating the deflection found in factory rubber mounts and allowing full shock articulation, this solid monoball design eliminates slop and maximizes shock efficiency and performance, allowing for more predictable handling on the street or the track - with almost zero added noise, vibration, and harshness.

     

    Replaces OE part #: 33526768544

     

    Key Benefits:

    • Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance.
    • Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear.
    • Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type).
    • Maintains OE shock position

     

    Design features:

    • Rebuildable using off the shelf bearings - these are the last rear shock mounts you’ll need to buy
    • Includes new hardware
    • Made in USA

     

    Housing:

    • Billet CNC 6061-T6 aluminum housing, type II anodized for exceptional durability and corrosion resistance

     

    Bearing:

    • FK WSSX14T teflon lined spherical bearing
    • 440C heat-treated stainless steel ball, 1 ⅜” ball dia.
    • 17-4 PH heat-treated stainless steel race
    • Self-lubricating PTFE liners are chemically bonded to the inner diameter of the race to offer a very high load-carrying capacity with greatly increased dynamic wear characteristics.
    • Static Axial Load Rating: 10,800 lbs.
    • Rod End Misalign Angle: 6 degrees

     

    Bearing inserts:

    • CNC machined 1144 steel, heat treated and melonite coated designed to maximize ball articulation while offering exceptional durability and corrosion resistance.

     

    This item fits the following BMWs: 
    2008-2013 E82 BMW 128i 135i 135is Coupe 
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan 
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe 
    2007-2013 E93 BMW 328i 335i 335is - Convertible 

     

     

    Show More Show Less
    Meyle Front Strut Mount - E46 E60 E61 E63 E64 E82 E83 E88
    Meyle Front Strut Mount - E46 E60 E61 E63 E64 E82 E83 E88
    For vehicles with production date from 04/2008
    5X Entries Into Our F80 M3 Sweepstakes
    We Price Match - Give Us A Call or Chat!
    Meyle - Corporate Logo
    T#:367404
    Part#: 31336752735
    Ships on Sep 23, 2026
    $ 34.99 USD
    Free Shipping on orders $49 and up
    Add to Wish List
    $ 34.99 USD
    Free Shipping on orders $49 and up
    Add to Wish List
    Direct replacement strut mount with integrated bearing for precise steering feel.
    Rear Upper Shock Mount Kit
    Rear Upper Shock Mount Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15710806
    Part#: 33506771738-KT
    In Stock
    Sale - Save 2% $ 49.12

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 48.01 USD
    Free Shipping
    Add to Wish List
    Sale - Save 2%
    $ 49.12

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 48.01 USD
    Free Shipping
    Add to Wish List
    Includes all the necessary mounts to install new shocks on the rear of your E9X BMW. The following parts are included. Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2)
    Show More Show Less

    Select Vehicle

    BMW Mini
    Clear Vehicle

    Purpose

    Category

    Brand

    Price

    $
    $

    Special Offers

    Shipping