Showing 247 results for ""

A sloppy shifter is one of the common complaints of older BMWs. In addition to the shifter linkage the transmission mounts contribute to rough and clunky shifting. BMW transmission mounts are rubber and get softer over time. This allows the transmission to dance around which changes the geometry of the shift linkage and could make it harder to shift. These urethane transmission bushings are stiffer than the stock rubber mounts and won't let the transmission shift around as much. The round design also has more surface area than the stock mounts which helps spread the load. Because the urethane is stiffer, expect more vibration to make its way into the shift lever area. Engine motor mounts should also be considered as a cause for driveline vibration, transmission movement, and poor shifting. Consider replacing your motor mounts at the same time as your tranny mounts.

Price is for the pair of transmission mounts with hardware.

This item fits the following BMWs: 
1989-1995  E34 BMW  525i 530i 535i 540i M5 
1992-1998  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 
1997-2003  E39 BMW  525i 528i 530i 540i M5 
1999-2005  E46 BMW  323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 
2008-2012  E82 BMW  128i 135i 1M Coupe 
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan 
2006-2012  E91 BMW  328i - Wagon 
2007-2013  E92 BMW  328i 335i 335is - Coupe 
2007-2013  E93 BMW  328i 335i - Convertible 
1997-2002  Z3 BMW  Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 

All sets of 12 now 10% off regular price

This is Red Line's latest synthetic transmission fluid that is compatible with BMW's MTF-LT3 transmission fluid. This is the transmission fluid used in both manual and automatic transmissions since the mid-2000's. To confirm, check the decal located on the side of your transmission. Price is per quart.

Synthetic D6 ATF is a lower viscosity version of the D4ATF and is designed for better fuel efficiency in CAFE testing. Dexron VI requires a different approach to a conventional ATF formulation. Rather than beginning with a 7.5 cSt fluid and allowing a viscosity loss in use to drop to 5.5 cSt, the Dexron VI fluid requires a starting viscosity of less than 6.4 and a final drop to no less than 5.5 cSt. Red Line D6 will drop to no less than 6.1 cSt. Since the final viscosity after use of these fluids are similar, Dexron VI fluids can be used where Dexron III fluidswere previously recommended (with the exception of some manual transmission applications, our customers report).

D6 ATF also provides significantly improved gear protection and will provide a GL-4 level of gear protection. The balanced frictional characteristics provide smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.

The transmission is sometimes neglected during regular vehicle maintenance over time. Without proper servicing, the automatic transmission fluid can deteriorate, resulting in contamination of the valve body and filter with deposits and sludge. This can cause issues like rough shifting, slipping, and, in severe cases, necessitate transmission replacement.

For a reliable replacement transmission filter, consider Febi-Bilstein for top-notch quality.

URO AT Plug Sealing Sleeve - BMW E8X E9X

URO AT Plug Sealing Sleeve - BMW E8X E9X is designed to replace a cracked or hardened original automatic transmission valve body sealing sleeve. This component is essential for preventing automatic transmission fluid (ATF) leakage, which can degrade transmission performance. Manufactured with an OE-style o-ring profile and high-quality materials, the sealing sleeve ensures a proper compression seal between the sleeve and valve body, effectively maintaining your vehicle's transmission integrity. Designed to withstand intense transmission heat and resist ATF degradation, it guarantees long-lasting reliability and optimal performance.

Key Benefits:

• Prevents ATF leakage by replacing cracked or worn valve body sealing sleeves, maintaining transmission function
• OE-style o-ring profile ensures proper compression and seal between the sleeve and valve body for leak-free operation
• High-quality materials resist heat and corrosive ATF degradation, extending the lifespan of your transmission components
• Easy to install with a direct-fit design, ensuring proper installation and performance
• Restores optimal transmission performance, helping to avoid costly repairs due to fluid leakage or heat damage