BMW Cooling System Parts & Accessories for BMW 1 Series E82 (2008-2013)

If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.

Kit includes

• Wahler Thermostat
• 1 liter of Coolant

This item fits the following BMWs: 
2008-2013  E82 BMW  135i 135is 1M Coupe 
2013+  E84 BMW  X1 xDrive35i 
2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2011-2013  E92 BMW  335i 335xi 335i xDrive - Coupe 
2011-2013  E93 BMW  335i Convertible 
2011-2013  E70 BMW  X5 xDrive35i 
2011-2013  E71 BMW  X6 xDrive35i

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

This packages covers the major components you would install along with a new water pump or thermostat. On the N54 cars (135i, 335i, 535i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:

• OEM VDO electric water pump, p/n 11517588885 or 11517632426
• OEM mounting screws for water pump (set of 3), p/n 11517602123
• OEM Behr thermostat, p/n 11537549476
• Original BMW connecting hose from thermostat to water pump, p/n 11537545665
• Original BMW hose clamps for hose (x 2)
  
• BUY AS A PACKAGE AND SAVE $$!
  
  The water pump on the N54 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the turbocharger oil and automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.
  
  How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.
  
  This water pump package fits the following BMWs with the N54 engine:
  2007-2010 E60 BMW 535i 535xi 535i xDrive
  2008-2010 E82 BMW 135i
  2011-2012 E82 BMW 1M Coupe
  2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
  2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
  2007-2010 E93 BMW 335i - Convertible

Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.

The Turner Motorsport Level 1 Performance Cooling System Refresh Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.

Our comprehensive "Level 1" High-Performance Cooling System Service Kit includes:

Turner Motorsport Heavy Duty Aluminum Expansion Tank Pierburg Full Aluminum Water Pump ECS Aluminized Water Pump Hose V2.0 Bremmen Parts Thermostat ECS Performance Silicone Radiator Hose Kit Genuine BMW Blue G48 Antifreeze (2 Gallons) Redline Water Wetter (12 oz.)

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance CSF Aluminum Radiator for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, and a Mishimoto Performance 74*C thermostat for lower temperature operation and increased cooling of the engine. 

Additional items included in this kit:

• OEM Replacement Coolant Hoses
• ECS Tuning Silicone Coolant Outlet Hose with ECS Billet Thermostat Hose Adapter
• ECS Tuning Aluminized Water Pump Hose
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Auxiliary Fan Switch
• OEM VDO Water Pump
• Genuine BMW Hardware for Easy Installation
• Genuine BMW Antifreeze/Coolant (Undiluted) - 2 Gallons

BMW Blue Engine Coolant Reservoir Cap is the perfect upgrade for BMW owners looking to enhance both the performance and appearance of their engine bay. Constructed from high-quality billet aluminum, this cap replaces the flimsy plastic factory cap, offering improved durability and a sleek, high-performance aesthetic.

Designed with precision, this coolant reservoir cap incorporates the OEM pressure relief function to maintain proper cooling system operation. Unlike inferior stick-on covers that may loosen over time, this cap is a complete replacement, ensuring a secure, leak-free fit. The blue anodized finish provides superior corrosion resistance, making it a reliable upgrade for daily drivers and track enthusiasts alike.

• OEM pressure relief function – Ensures proper cooling system performance and safety
• Billet aluminum construction – Provides enhanced durability and strength over factory plastic caps
• Direct-fit replacement – Fully replaces the stock cap for a precise, secure fit
• Blue anodized finish – Resists corrosion, heat, and wear for long-lasting performance
• Motorsport-inspired design – Adds a sleek, professional look to the engine bay
• Built for longevity – Engineered to withstand extreme temperatures and coolant exposure

Upgrade your BMW’s cooling system with the BMW Blue Engine Coolant Reservoir Cap, designed for superior reliability and style.

BMW Black Engine Coolant Reservoir Cap is a premium upgrade designed to enhance both the functionality and aesthetics of your BMW’s engine bay. Unlike flimsy plastic OEM caps, this high-performance cap is CNC-machined from durable billet aluminum, providing long-lasting strength and a sleek, motorsport-inspired look.

Built with precision, this cap retains the essential OEM pressure release function, ensuring proper cooling system operation without compromise. Unlike inferior adhesive covers that may detach over time, this cap fully replaces the factory component, delivering a secure and reliable fit. With a corrosion-resistant black anodized finish, it withstands extreme temperatures and harsh conditions while elevating your BMW’s under-hood appearance.

• OEM pressure regulation – Maintains factory-designed pressure release for optimal cooling performance
• CNC-machined billet aluminum – Provides exceptional durability and long-term reliability
• Direct replacement – Fully replaces the stock cap, ensuring a perfect fit without modifications
• Corrosion-resistant anodized finish – Prevents wear and adds a stealthy, high-performance look
• Heat and fluid-resistant design – Built to withstand extreme temperatures and coolant exposure
• Enhanced engine bay styling – Offers a sleek, motorsport-inspired upgrade

Upgrade your BMW’s cooling system with the BMW Black Engine Coolant Reservoir Cap, designed for superior performance and long-lasting durability.

BMW Silver Engine Coolant Reservoir Cap is a premium upgrade for BMW owners looking to enhance both the performance and appearance of their engine bay. Crafted from high-strength billet aluminum, this cap replaces the factory plastic version, offering superior durability and a refined, professional look.

Designed with functionality in mind, it integrates the OEM pressure relief system to ensure your engine's cooling system remains safe and efficient. Unlike adhesive covers, which can peel or wear over time, this cap is a direct-fit replacement, providing a secure and leak-proof seal. The silver anodized finish not only enhances the visual appeal but also ensures resistance to corrosion, high temperatures, and wear, making it perfect for daily driving and track use.

• OEM pressure relief integration – Maintains proper cooling system performance and reliability
• Durable billet aluminum – Outperforms factory plastic caps in longevity and strength
• Precision-machined for perfect fitment – Replaces the stock cap securely, not just a cover
• Anodized silver finish – Offers corrosion, heat, and wear resistance
• Elevates engine bay aesthetics – Adds a clean, professional appearance
• Built for both street and track use – Designed to withstand extreme conditions

Enhance your BMW’s cooling system with the BMW Silver Engine Coolant Reservoir Cap, providing both style and functionality for years to come.