Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your N52/N54 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install

If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Product Features:

Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

The N54 engine, like many BMW engines, has a reputation for encountering cooling system issues. To address this, Turner Motorsport enthusiasts have curated a comprehensive kit to safeguard your N54 cooling system against potential failures.

Included in the kit:

1. Turner Motorsport Heavy Duty Aluminum Expansion Tank Kit:

Enhances the factory plastic tank design, known for its vulnerability to failure. Maintains original coolant capacity and expansion volume. Features a baffled tank design to prevent air pockets during aggressive driving. Includes a specially designed bleed passage to avoid air introduction during engine cooldown. Constructed with fully-TIG welded 5052 aluminum. Comes with aluminum bleeder screw, OE coolant level sensor, expansion tank cap, flared coolant pressure release line, and all necessary installation hardware. 2. ECS Performance Coolant Outlet Hose Kit:

4-ply reinforced silicone outlet hose. Internal layer lined with Flourosilicone for exceptional chemical resistance. Equipped with billet 6061-T6 outlet adapter. 3. Redline Water-Wetter Coolant Additive - 12 oz:

Lowers coolant temperatures by up to 30*F. Compatible with various cooling system components including aluminum, cast iron, copper, brass, and bronze. For N54 owners seeking enhanced cooling system performance and longevity, especially those pushing significant power, this kit is indispensable.

Upgrade your cooling system with durable silicone hoses that offer extended life and enhanced heat tolerance. Say goodbye to stock limitations and opt for silicone hoses that retain OEM fitment while overcoming typical OEM hose flaws. These hoses are designed to resist deterioration and softening due to coolant heat cycles, ensuring prolonged longevity compared to traditional rubber hoses.

Specifically, this hose connects from the thermostat housing outlet to the front of the cylinder head. Its features include:

• Inclusive of both upper and lower clamps for easy installation.
• Crafted from 4-Ply reinforced silicone, ensuring superior durability compared to OE rubber hoses that are prone to failure.
• Internal layer lined with Flourosilicone for exceptional chemical resistance.
• Silicone construction provides reduced thermal conductivity, enhanced resistance to ozone, and UV degradation, thereby boosting overall performance and longevity.

Upper and lower radiator silicone coolant hose kit to upgrade from your stock rubber hoses. Includes stainless steel hose clamps.

Upgrade all of those common, aging, dry-rotted rubber hoses under the hood of your vehicle with ECS durable, Silicone Radiator Coolant Hose Set. These perform and look great within any engine bay, they are made to last longer than standard rubber hoses and are perfectly molded to the OE hose specifications for a simple installation on most vehicles.

Made from heavy duty, reinforced silicone, this silicone coolant hose set can handle higher temperatures and greater pressure than the stock, squishy rubber hoses. Designed to resist oil, fuel and electrochemical degradation and tested up to continuous 250° Fahrenheit operating temperature and over 45psi, you can expect to achieve greater reliability, less turbulence and improved flow with our smooth silicone hoses.

Kit contents:

Upper Radiator hose
Lower Radiator hose
4 factory flange connections
German-style stainless steel hose clamps
With the smoother internal passageways, consistent hose internal diameters, and smoother bends will result in improved flow for greater cooling system performance with added durability.

The perfect way to take the worry out of your coolant hoses and keep your engine from potentially overheating.

Ensure a tight and leak-free seal in your BMW's cooling, vacuum, or intake systems by installing a new adjustable hose clamp. Over time, clamps can deform or lose their tightness due to aging or frequent removal, potentially causing leaks in your coolant or vacuum hoses. Avoid the risk of leaks by replacing old clamps with new hardware, offering peace of mind against coolant and vacuum system issues.

Key benefits of the adjustable hose clamp include:

• Maintaining a secure and leak-free seal in your BMW's systems.
• Preventing coolant or vacuum leaks that can affect performance.
• Adjustable size from 70mm to 78mm for versatile applications.

Upgrade your hose clamps to ensure optimal performance and reliability in your BMW's systems.

Upgrade your BMW with ECS Tuning's Stainless Steel Hose Clamps, designed for convenience and durability. With various band widths and German-style T-bolts, these clamps offer easy adjustment to your required diameter. Say goodbye to dealer pricing and enjoy the quality you love at ECS Tuning.

• Full stainless steel construction
• Various band widths available
• German-style T-bolts for easy adjustment
• Convenient solution for hose clamp replacement

Upgrade Your BMW Maintenance with Stainless Steel Hose Clamps from ECS Tuning

ECS Tuning introduces premium full stainless steel hose clamps, offering superior quality and convenience for your BMW maintenance. Avoid dealership delays and overpricing by choosing from a selection of band widths, ensuring you receive top-quality hose clamps without overpaying.

Key Benefits:

• Premium full stainless steel hose clamps
• Various band widths for enhanced convenience
• High-quality alternative to dealership pricing
• Readily available stock eliminates waiting time

Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.

• Made of durable 304 stainless steel for long-lasting performance
• German-style T-bolt design for easy size adjustment
• Convenient band widths for versatile applications
• Quality alternative to dealership pricing