Knock down the roadblocks preventing you from performing regular maintenance on your BMW. On the E9x and E8x chassis you run into issues with changing the rear spark plugs and coil packs. A job that should take approximately an hour or so ends up taking significantly longer because you have to remove the cowl and all associated screws. Most of the time the screws end up missing or dropped into your engine bay which can be a headache and you have to order new hardware or deal with the cowl being incorrectly fastened.

Cowl delete filters are a great addition to your E9x or E8x chassis; these filters allow you to get rid of clutter in the engine bay which adds benefits like weight reduction, improved air flow in the engine bay, more room for working on the engine and an overall cleaner engine bay appearance. We all know it is important to keep up on engine maintenance to keep your BMW running at peak performance and prevent larger future issues. When we can eliminate any roadblocks or additional work preventing us for performing engine maintenance this could make it less daunting to go change spark plugs, coil packs or simple filters.

Benefits:

Weight Reduction
Cleaner engine bay appearance
Added room for maintenance
Improved engine bay air flow

These aluminum pedals were designed with one thing in mind -- performance. We wanted a pedal set that gave us the grip EXACTLY where we wanted it: MASSIVE GRIP on the brake and clutch pedals, and far less grip on the accelerator to allow the right foot to better slide/move during heal-toe braking. This set surpasses all others in this area, giving your BMW's foot operated controls a more tactile feel and response. The brake and clutch pedals feature pyramid shaped spikes, which actually BITE the soles of your shoes PERFECTLY, creating the ultimate (and unbeatable) friction surface. 

These pedals are 100% MADE IN THE USA, and are CNC machined from aircraft quality aluminum billet to perfectly fit your BMW. There's no rubber to wear out, and no cosmetic finishes to chip or flake off. Stainless steel hardware is included, as well as a basic installation guide (professional installation always recommended). These pedals are for left-hand drive (LHD), manual transmission BMWs only (including SMG and DCT sequential manual gearboxes -- on these cars, you will only use one of the included clutch/brake sized pedals). Please note on E36 convertible models (1994-1999) the optional footrest requires modification. 
 

These aluminum racing pedals fit the following left-hand drive BMWs:
2014+ F22 BMW 228i M235i 
1984-1991 E30 3 Series - 318i, 318is, 325, 325e, 325es, 325i, 325is, 325ix ** with MANUAL transmission
1992-1998 E36 3 Series - 318i, 318is, 318ti, 325i, 325is, 328i, 328is, 323is ** with MANUAL transmission
1996-1999 E36 M3 including 3.2 liter M3 ** with MANUAL transmission
1999-2005 E46 3 Series - 323i, 323Ci, 328i, 328Ci, 325i, 325Ci, 325xi, 330i, 330Ci, 330xi ** with MANUAL trans
2001-2006 E46 M3 coupe & convertible (SMG uses only one brake/clutch pedal)
2008-2013 E82/E88 1 Series - 135i coupe & 135i convertible with MANUAL or DCT
2006-2011 E90/E92 3 Series - 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi ** with MANUAL transmission
2008-2013 E90/E92/E93 M3 including M3 sedan, M3 coupe & E93 M3 convertible (DCT uses only one brake/clutch pedal)
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2015+ F80 BMW M3 (DCT uses only one brake/clutch pedal)
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
2015+ F82 BMW M4 (DCT uses only one brake/clutch pedal)
1989-1995 E34 5 Series - 525i, 530i, 535i, 540i ** with MANUL transmission
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 (SMG uses only one brake/clutch pedal)
2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive M5 (DCT uses only one brake/clutch pedal)
2004-2010 E63 BMW 645ci 650i M6 (SMG uses only one brake/clutch pedal)
2012+ F12 BMW 640i 650i 650i xDrive M6 (DCT uses only one brake/clutch pedal)
2013+ F06 BMW 640i Gran Coupe 650i Gran Coupe 650i xDrive Gran Coupe M6 Gran Coupe (DCT uses only one brake/clutch pedal)
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

These aluminum pedals were designed with one thing in mind -- performance. We wanted a pedal set that gave us the grip EXACTLY where we wanted it: MASSIVE GRIP on the brake and clutch pedals, and far less grip on the accelerator to allow the right foot to better slide/move during heal-toe braking. This set surpasses all others in this area, giving your BMW's foot operated controls a more tactile feel and response. The brake and clutch pedals feature pyramid shaped spikes, which actually BITE the soles of your shoes PERFECTLY, creating the ultimate (and unbeatable) friction surface.

These pedals are 100% MADE IN THE USA, and are CNC machined from aircraft quality aluminum billet to perfectly fit your BMW. There's no rubber to wear out, and no cosmetic finishes to chip or flake off. Stainless steel hardware is included, as well as a basic installation guide (professional installation always recommended). These pedals are for left-hand drive (LHD), manual transmission BMWs only (including SMG and DCT sequential manual gearboxes -- on these cars, you will only use one of the included clutch/brake sized pedals).

Now available in (optional) black anodized! The same shoe-gripping performance as our standard "naked" aluminum racing pedals, but with an added black anodized coating, for a stealth black finish. We always recommend the naked metal pedals for harsher/race type use, as all cosmetic finishes will eventually degrade over time. But for those looking for the black-out look, we can now accommodate! To add this option, simply choose your selection below.

Enhance comfort and style in your BMW with the Seat Belt Shoulder Pad. Designed to make wearing your seat belt more comfortable, this pad adds a touch of Motorsports style to your car. Perfect for longer road trips or track days, it goes over your factory seat belt, providing an extra layer of cushioning. Explore the benefits of the Seat Belt Shoulder Pad:

• Adds comfort and Motorsports style to your BMW.
• Easily fits over the factory seat belt for quick installation.
• Extra cushioning for a more comfortable experience on road trips or track days.
• Dimensions of 5" in width and 12" in length for long-lasting comfort.
• Enhances the overall driving experience for BMW enthusiasts.

Removing the cowl saves weight, simplifies maintenance, and lowers underhood temps. Keep things clean and free of debris with these BMW cowl filters. Dry filters will require little to no maintenance and are a great compromise when removing the cowl.

Fits the following BMWs:
E82 E88 1 Series
E90 E91 E92 E93 3 Series

The ULTIMATE shifter upgrade for your BMW! Experience more precise throws, less shift lever travel, and an all-around transformation in your shifting experience.

For dozens of years, enthusiasts have critiqued the imprecise and vague feeling of BMW manual transmissions. Plagued with long throws, fore and aft play in gear, and a generally loose feeling, your OEM BMW shifter leaves much to be desired. While most standard carrier-mount short throw shifter kits will aid in reducing throw length and eliminating side-to-side play in gear, some enthusiasts long for a hardcore, race-inspired shifter that completely removes play and excessive throw length. At Turner Motorsport we share the same desire and set out to offer the ULTIMATE upgrade with this Performance Chassis Mount Short Shifter.

WHY UPGRADE?

Factory BMW shifter assemblies are complex by nature. The main component of this assembly is the shift carrier, a cast aluminum piece positioned inside the transmission tunnel that incorporates bushings at both ends for mounting. Like most factory parts, these bushings are designed to reduce NVH (noise, vibration, and harshness) transmission to the cabin. To the spirited driver, however, these bushings translate to flex and vagueness in the shift lever. Moreover, because this carrier is mounted to both the transmission and the body, the entire shifter assembly will "float" with the driveline, further increasing the vague and imprecise feeling of your shifter.

Our Performance Chassis Mount Short Shifter removes the shift carrier assembly entirely—removing any prospect of flex caused by bushings or driveline movement. By contrast, this chassis mount shifter offers a drastic reduction in shift lever travel, vagueness, and side-to-side play. An elevated base allows for moving the fulcrum point upwards, resulting in a much shorter and more precise throw. Shift times are further reduced by a tall, "rally style" shift lever, used to aid in leverage while also bringing the lever closer to the steering wheel. Our design incorporates a proprietary centering spring design, which is adjustable for increasing or decreasing self-centering force. In short, this design eliminates all the drawbacks of your factory BMW shifter, translating to more control, greater precision, shorter throws, and faster shift times.

FEATURES & BENEFITS

Reduced Throw: Modified shifter geometry and heightened fulcrum point translate to a shorter shift lever throw
Improved Shifter Feel: Eliminating the shift carrier and associated bushings drastically reduces "slop" and side-to-side play in the shift lever
Increased Precision: Mounting the shifter to the chassis allows for little to no variation in gear selection
Universal Fitment: Fits many BMW chassis with the provided base plate and hardware (see "Fits These Cars" for exact fitment information)
DESIGN

6061 aluminum, 4130 steel, and 316 stainless steel construction
A type-II black anodized finish
Adjustable self-centering spring
"Rally Style" shift lever
Spherical bearing pivot with maintenance-free brass insert
Product Development:

Our Chassis Mount Shifters are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Upgrade your driving experience with the BMW Black Anodize Turner Motorsport Aluminum Pedal Set for E30/E36/E46/E9x Automatic Transmission.

Crafted with precision and designed for performance, this pedal set enhances both the aesthetics and functionality of your BMW. The set includes pedals tailored specifically for automatic transmission vehicles, ensuring a perfect fit and seamless integration. Elevate your control and comfort with these premium aluminum pedals, engineered to withstand daily use and enhance grip. Transform your BMW's interior with this sleek and stylish upgrade, brought to you by Turner Motorsport.

• Enhances driving aesthetics and functionality
• Precision-engineered for optimal performance
• Tailored for automatic transmission vehicles
• Premium aluminum construction for durability
• Provides enhanced grip for improved control

This e-brake handle is a great way to personalize your BMW's interior. Constructed of alcantara and suede, it looks as good as it feels, and will add a subtle custom touch to any BMW.

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

• Direct installation to factory seats without compromising seat travel or legroom
• Constructed from aircraft-grade aluminum for durability
• Compatible with standard 2.5lb fire extinguishers
• No mess or damage to vehicle or surfaces
• Easy access in case of emergencies

If cutting weight is your main priority, this Trunk Filler Plate is exactly what you need. You can eliminate the carpet and excess plastic and parts without leaving a gaping hole in your trunk. This is a simple drop-in solution that can be easily modified.

Features:

• Laser cut .060 Aluminum
• Contoured for added strength and rigitity
• Easy Modification

Fits the following vehicles:

E9X BMW M and Non-M Chassis

E82/E88 BMW All submodels

These aluminum pedals give your interior a high-performance look while adding extra grip when you need it most. These pedal covers include all necessary hardware for installation and will look great in your BMW.

Note: Footrest/dead pedal is NOT included with this set. 

3D Design is focused on high-quality styling components that allow you to personalize the look of your BMW & remain true to the car's original form. Inspired by European tuning trends & Japan's unique VIP tuning style, their wide range of lips, diffusers, side skirts, & spoilers are made from high-quality urethane or super light, super strong prepreg dry carbon and install easily to your factory bumpers & skirts to offer an understated, aggressive performance look.

By popular demand, our shoe-gripping Turner Motorsport pedal set is now available for E82 1 series and E9X 3 series with automatic transmission. These pedal covers feature pyramid shaped spikes on the brake pedal, which actually BITE the soles of your shoes PERFECTLY, creating the ultimate (and unbeatable) friction surface where you want it. The throttle pedal is left smooth, so that your foot can roll on and off the gas smoothly. The automatic transmission set includes 2 pieces -- one brake pedal and one throttle/gas pedal.

Our pedals are anodized for a beautiful cosmetic finish that resists chips and flaking. Stainless steel hardware is included, as well as a basic installation guide (professional installation always recommended). These pedals are for left-hand drive (LHD), automatic transmission BMWs only (sequential manual transmission cars should use the manual transmission set).

Also available in black anodized! The same shoe-gripping performance as our standard "naked" aluminum racing pedals, but with an added black anodized coating, for a stealth black finish. We always recommend the naked metal pedals for harsher/race type use, as all cosmetic finishes will eventually degrade over time. But for those looking for the black-out look, we can now accommodate! To add this option, simply choose your selection below.

Upgrade the steering wheel of your BMW or MINI with the Rennline Leather Steering Wheel - Black Spokes & Black Horn Ring. This leather steering wheel features black spokes and a black horn ring, adding a sleek and stylish touch to your vehicle's interior. Engineered for durability and comfort, this steering wheel provides a comfortable grip and precise control. Elevate the driving experience of your BMW or MINI with this premium leather steering wheel.

• Sleek and stylish design with black spokes and horn ring
• Engineered for durability and comfort
• Provides a comfortable grip for enhanced driving experience
• Compatible with both BMW and MINI models