Packaged by Turner for BMW 1 Series E82 (2008-2013)

Ensure proper sealing when installing the turbos on your N54.

Kit includes:

• 16 - ASA M7x39 studs
• 16 - Flange nuts
• All required gaskets and o-rings
• Water pump install hardware
• Replacement vacuum hose
• T-bolt clamps

Helpful hints:

For complete installation instructions, refer to Haynes Service Manual (T#193950).

Both downpipes must be removed to remove either front or rear turbo. Tie rod end may need to be separated from knuckle for clearance. Steering rack may also need to be rotated away from subframe for access. Valve cover heat shield will need to loosened and pushed upward to get clearance for turbo manifold removal.

If studs back out of cylinder head and nuts are seized to studs, replace studs. Thread studs in to head by hand to prevent cross threading. When installing the new studs in the cylinder head, use a high temperature loctite in the cylinder head side, and copper anti-seize on the nut side.

To make more room for access to the front turbo, remove the rubber line running in front of the subframe that attaches to the back of the map thermostat and remove the clip. Cut off the OEM clamp and replace it with a new hose clamp as well.

Complete removal of the water pump is not required. Detach the water pump from the side of the block and push it out of the way to make more room for access to the front turbo. If water pump is unbolted from the block, the aluminum bolts must be replaced.

Torque specs:
Bracket to cylinder head: 9Nm
Coolant supply line to crankcase: 9Nm
Coolant return line to crankcase: 8Nm
Coolant return line to turbo: 8Nm
Coolant supply line to supply line: 8Nm
Exhaust manifold heat shield: 8Nm
Oil supply line to crankcase: 20Nm
Oil pressure line to turbo: 8Nm
Oil return line to crankcase: 8Nm
Oil return line to turbo: 8Nm
Turbo manifold to head: 20Nm

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! 

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport Recommends three Liqui Moly oil options for your BMW:

Leichtlauf High Tech full synthetic engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption - most BMWs like to drink oil, Leichtlauf should make yours less thirsty. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

Synthoil Premium engine oil is designed to provide great engine wear protection as well as fuel savings and reduced oil consumption. Using proprietary blends of base oils and the latest additive technology, this full synthetic oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.

New generation Molygen engine oil allows you to easily identify oil leaks with the included UV flashlight - BMWs are notorious for oil leaks, and this allows you to work towards solving this problem. Additionally, Molygen is a fully synthetic oil designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. 

Choose the level of Liqui Moly Oil Service your BMW deserves: 

• Liqui Moly Bronze service involves switching to Liqui Moly oil without the introduction of additives.
• Liqui Moly Silver service includes a Pro-Line Engine Flush to remove sludge and carbon buildup from the oil circulation system.
• Liqui Moly Gold service includes Silver service and Jectron Fuel Injection System Cleaner. This cleans your injectors and maintains your fuel system to improves engine performance and efficiency.
• Liqui Moly Platinum service includes Gold service and Cera Tec Oil Additive. This prevents wear and reduces friction to improve engine performance and efficiency.

Below you can add new drain plug and crush washer, along with your choice of oil filter.

This kit also features many Popular Service Tools that make your life easier when working on your BMW:

• Turner Motorsport Magnetic Fender Cover
• Schwaben 6.5L Fluid Extractor
• Schwaben 14mm/17mm Service Wrench
• Schwaben Professional BMW/MINI Scan Tool

Have you ever been bent over your engine bay for a few hours and noticed that your belt scratched your fender? We've got you covered with the Turner Motorsport Magnetic Fender Cover. We also offer a myriad of Schwaben tools. Schwaben's Professional Scan Tool vastly simplifies diagnosing your BMW. This scan tool offers OE-level diagnostics for over 25 years of models, also allowing you to access common service features like resetting your oil service light, installing a new battery, throttle body adjustment, DPF regeneration, and more. The Schwaben Fluid extractor allows you displace 6.5L of fluid without making a mess of your workspace. Lastly, we've found that the 14mm/17mm service wrench allows you to service most of your vehicle with just one tool - one of the biggest hangups with working on a vehicle is losing your tools. Save yourself time looking for multiple different tools across your garage by owning one that does it all.

These products fit the following BMWs:

2006-2012 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2005-2009 E60/E61 525i 525xi 528i 528xi 530i 530xi 535i
2005-2008 E85/E86 Z4 2.5i Z4 3.0si
2010-2016 F10 520i 520Li 523i 525Li 528i
2009–2017 F10/F11/F07 535i
2009-2016 E89 Z4 sDrive18i Z4 sDrive20i Z4 sDrive23i 2008-2011 Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2005-2010 E83 X3 2.5si xDrive25i X3 3.0si 
2007-2013 E82/E88 125i 128i 135i 135is
2011 E82 1 Series M Coupe
2009-2011 E84 X1 X1 xDrive/sDrive20i xDrive25i X1 xDrive28i X1 xDrive/sDrive28i xDrive35i
2004-2010 E63/E64 630i
2006-2012 E87 130i
2010+ F25 X3 sDrive18i X3 xDrive20i X3 28i X3 xDrive28i X3 xDrive35i
2006-2013 E70 X5 3.0si xDrive30i X5 xDrive 35i
2008–2014 E71 X6 xDrive35i
2008–2015 F01 740i 740i/Li
2011–2015 F30/F31 335i
2011–2016 F30 320i 328i
2013–2016 F32/F33/F36 435i
2014+ F15 X5 xdrive 35i
2014+ F16 X6 xDrive35i
2014+ F26 X4 xDrive 35i X4 M40i
2011+ F06/F12/F13 640i
2012–2016 F20/F21 M135i
2012–2017 F20 125i
2013–2016 F22/F23 M235i
2014+ F22 220i 225i 228i
2016+ F87 M2
2013–2016 F34 320i GT
2013–2016 F34 328i GT
2014–2017 F26 X4 xDrive20i

If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.

Kit includes

• Wahler Thermostat
• 1 liter of Coolant

This item fits the following BMWs: 
2008-2013  E82 BMW  135i 135is 1M Coupe 
2013+  E84 BMW  X1 xDrive35i 
2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2011-2013  E92 BMW  335i 335xi 335i xDrive - Coupe 
2011-2013  E93 BMW  335i Convertible 
2011-2013  E70 BMW  X5 xDrive35i 
2011-2013  E71 BMW  X6 xDrive35i

This kit includes every thing needed to replace your rod bearings.

Kit includes

Upper and lower WPC-treated rod bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

7 Liters of Liqui Moly 0w-40 Voll-Synthese Energy Oil
Hengst Oil Filter Kit
Febi Oil Drain Plug & Washer

Liqui-Moly's Voll-Synthese Energy engine oil is specifically formulated for optimum oil penetration speed, deposit prevention, and resistance to aging. These factors allow for exceptional gasoline or diesel engine cleanliness, keeping the surfaces of the engine and engine components free from carbon and sludge deposits. This allows the oil to form a stronger film that in turn helps prevent wear much more efficiently than many standard oils. This also allows for easy, smooth engine operation that results in better responsiveness and less total fuel consumption.

Meets the following requirements;

• ACEA A3-98/B3-98
• API SJ-CF
• BMW [Longlife] LL-98
• Daimler (MB 229.1)
• VW 502.00 - 505.00

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Lemforder and Corteco mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

• OEM Corteco Engine Mount (x2)
• OEM Lemforder Transmission Mount (x2)
• New Installation Hardware

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
2006-2013 E9X BMW M3
2011-2012 E82 BMW 1M

• rear sway bar bushing brackets, 33556780707
• bracket mounting screws, 07119907125
• rear sway bar links, 33556764428
• lower link mounting bolts, 07119903931
• upper link mounting nuts, 33326768884

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Kit Includes:

• Automatic transmission filter with associated hardware
• Oil pan gasket
• Drain plug with sealing washer
• Fill plug with sealing washer
• 7 quarts Redline D6 automatic transmission fluid

Fits the following BMWs:
E82/88 BMW 128i - with GA6L45R automatic transmission 
E83 BMW X3 N52 3.0L - with GA6L45R automatic transmission 
E9X BMW 328i/xi  - with GA6L45R automatic transmission 

The water pumps in BMW N54 models are known for failure near 80,000 miles. This is a very common issue that often times leaves the owner stranded. This kit provides a single stop for the water pump and thermostat replacement to save the search and get you back on the road.

Included in this kit:

Thermostat
Water pump
Genuine BMW coolant
Mounting hardware required for both the thermostat and water pump