BMW X Series E84 (2013-2015)

Liqui Moly Ceratec Oil Additive

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:379270

Part#: 3721

In Stock

Sale - Save 5% $ 27.99

$ 26.59 USD

Add to Wish List

Qty

Sale - Save 5% $ 27.99

$ 26.59 USD

Add to Wish List

Using a combination of ceramic compounds, this oil additive reduces friction and wear by forming a protective film that cuts down on direct metal to metal contact. This both extends the engines service life and reduces fuel consumption in both gasoline and diesel engines. Specially formulated to adhere to the internal engine's metal surfaces, which makes this great for vehicles with high pressure, cam-driven fuel pumps and engines that make excessive noise on start up.

Show More Show Less

Proline Engine Flush and Cera Tec Oil Treatment - Oil Change Additive...

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:578656

Part#: CERATECFLUSHKT

In Stock

Sale - Save 5% $ 40.99

$ 38.93 USD

Add to Wish List

Qty

Sale - Save 5% $ 40.99

$ 38.93 USD

Add to Wish List

**Not to be used with Liqui Moly Molygen Engine Oil - Molygen already includes friction modifiers** Step 1 - Engine Flush - Add to engine oil before engine oil change. Let engine run on idle speed for 10 minutes. Drain oil, change oil filter and re-fill with fresh high quality oil. Pro-Line Engine Flush is a development product based on highly effective state-of-the-art additive technology. These highly effective detergent and dispersant additives, in association with the carrier fluid, have been tested in the laboratory and in practical field trials for their ability to dissolve sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Properties: Gentle and rapid cleaning Neutral to seals and other materials installed in the engine Compatible with catalytic converters Highly economical No additional environmental pollution Simple to use Contents sufficient for 5 liter engine oil capacity Fully compatible with all commercially available engine oils. Benefits: Removes deposits & residues Dissolves sludge & lacquer and isolates solid particles & liquid contaminants Improves the combustion process and restores full engine performance Prevents corrosion of unprotected metal surfaces Recovers oil lubricating properties Suitable for all gasoline and diesel engines. Step 2 - Cera Tec - Add in with your New Engine Oil Cera Tec is a high quality ceramic wear protection product which is safe for use in all engine oils. It reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. Cera Tec reduces direct metal-to-metal contact, thus increasing the engine service life. The low-friction effect reduces fuel consumption in gasoline and diesel engines. The chemicals in this specially-formulated product adhere to metal surfaces to reduce internal wear and friction, giving you peace-of-mind and saving you costly repairs in the future. Treats up to 5 liters of engine oil and provides up to 30,000 miles of protection under normal driving conditions. *Note: Not suitable for use with wet clutch applications or limited slip differentials. Great for use in vehicles with high-pressure, cam-driven fuel pumps or engines making noise upon start-up.

Show More Show Less

APEX M12x1.5mm BMW 5 Lug Stud Kit - Hex head Black Finish - 75mm Leng...

T#:637384

Part#: APEXM12STDKIT5HX

Ships in 2 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

Liqui-Moly Oil Change Additive Package - Proline Engine Flush and MoS...

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:578655

Part#: MOS2FLUSHKT

In Stock

Sale - Save 5% $ 21.99

$ 20.88 USD

Add to Wish List

Qty

Sale - Save 5% $ 21.99

$ 20.88 USD

Add to Wish List

This two-step kit features a flushing additive to be run through before the oil change and MoS2 for after new oil has been added.

Special Tec B FE 0W-30 Motor Oil - 5 L

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:32980578

Part#: 22261

In Stock

Sale - Save 10% $ 58.98

$ 53.08 USD

Add to Wish List

Qty

Sale - Save 10% $ 58.98

$ 53.08 USD

Add to Wish List

BMW N54 N55 N63 S63 HJS V-Band Exhaust Clamp - Priced Each

T#:396285

Part#: 11657620508

In Stock

$ 21.49 USD

Add to Wish List

Qty

$ 21.49 USD

Add to Wish List

BMW N54 N55 N63 S63 HJS V-Band Exhaust Clamp - Priced Each is designed for superior performance and reliability in exhaust system maintenance and upgrades. Engineered by Turner Motorsport, this high-quality clamp ensures a secure and leak-free connection in your BMW's exhaust system.

Durable Construction: Made from premium materials to withstand high temperatures and harsh conditions, ensuring long-lasting performance.
Precision Fit: Designed to fit perfectly with BMW N54, N55, N63, and S63 engines, offering a secure and reliable seal.
Improved Exhaust Efficiency: Prevents leaks and maintains optimal exhaust flow, contributing to better engine performance and efficiency.
Easy Installation: The V-band design allows for quick and easy installation or removal, simplifying exhaust system maintenance.
Versatile Use: Ideal for both performance upgrades and routine repairs, making it a valuable addition to any BMW enthusiast's toolkit.

Show More Show Less

10w-60 Engine Oil Liqui Moly Race Tech GT1 - Case Of 12

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:588076

Part#: 2068/12KT

In Stock

Sale - Save 5% $ 143.99

$ 136.69 USD

Add to Wish List

Qty

Sale - Save 5% $ 143.99

$ 136.69 USD

Add to Wish List

10w-60 Engine Oil Liqui Moly Race Tech GT1 is specially formulated to meet the rigorous demands of high-performance BMW engines. This advanced engine oil provides exceptional lubrication, ensuring optimal engine performance even under the most challenging conditions. Designed for both street and track use, it offers superior wear protection and thermal stability, making it the perfect choice for enthusiasts who demand the best for their vehicles.

Benefits:

High Viscosity Stability: Maintains consistent performance across a wide temperature range, ideal for both hot and cold conditions.
Exceptional Engine Protection: Reduces wear and tear, extending the life of engine components, and ensuring reliability during high-performance driving.
Enhanced Performance: Improves engine responsiveness and efficiency, providing noticeable power gains and better throttle response.
Compatible with BMW Engines: Specifically designed to meet the lubrication needs of BMW’s high-performance engines, including those in motorsport applications.
Advanced Additive Technology: Includes high-quality additives that prevent sludge formation and keep the engine clean for optimal performance.

Choose 10w-60 Engine Oil Liqui Moly Race Tech GT1 for your BMW to experience superior performance and protection in every drive.

Show More Show Less

Liqui-Moly Top Tec 4110 Engine Oil (5w-40) - 5 Liters

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:599295

Part#: 22122

In Stock

Sale - Save 5% $ 46.99

$ 44.64 USD

Add to Wish List

Qty

Sale - Save 5% $ 46.99

$ 44.64 USD

Add to Wish List

Top class fully synthetic, low-SAPS motor oil with the latest additive technology for superior performance and efficiency in modern gasoline and diesel vehicles with and without particulate filters (GPF / DPF). Guarantees lowest friction and outstanding protection even under tough operating conditions in high-performance engines. Properties: outstanding lubrication reliability rapid oil penetration excellent high-pressure and wear protection properties prevents the build-up of deposits outstanding engine cleanliness optimum stability to aging reduces fuel consumption compatible for the use with turbochargers and catalytic converters Specifications and approvals: ACEA C3 API SN BMW Longlife-04 (LL-04) - Backwards compatible with Longlife-98 (LL-98) and Longlife-01 (LL-01) MB-Approval 229.31 ∙ MB-Approval 229.51 ∙ MB-Approval 229.52 ∙ Porsche C40 VW 511 00 Recommended for the following specifications: GM dexos2 MB 226.5 Renault RN 0700 Renault RN 0710 Specifically developed for selected gasoline and diesel engines of the latest generation. Tested safe with catalytic converters and turbochargers. Depending on the manufacturer's instructions, extended oil change intervals can be achieved. Founded more than 50 years ago, Liqui Moly GmbH from Ulm in southern Germany offers a wide variety of high-quality products including motor oils, additives, car care products, and chemically-based technical solutions for automotive applications. Liqui Moly develops and tests its products in its own laboratories, manufactures only in Germany, and is among the most distinguished in the industry.

Show More Show Less

Liqui-Moly Brake Anti-Squeal Paste - 250g

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:599297

Part#: 22092

Ships Jul 22, 2025

Sale - Save 11% $ 36.99

$ 33.00 USD

Add to Wish List

Qty

Sale - Save 11% $ 36.99

$ 33.00 USD

Add to Wish List

Extremely adhesive and high-temperature resistant specialty for lubricating and separating modern brake systems of all types of motor vehicles. It is made of synthetic materials, resists road salt and splash water, and prevents and eliminates squeaking noises from brakes. With excellent corrosion protection and particularly suited for the use with aluminum and magnesium materials as well as on vehicles with ABS / ESP systems. Properties good corrosion protection easy to use eliminates squeaks resistant to road salt and splash water extremely low friction outstanding thermal stability extremely adherent ideally suited as a separating paste Brake Anti-Squeal Paste has been specially developed for the assembly, repair, and maintenance of brake systems. Used for basic lubrication and as a preventive measure against brake squeals. However, it is also universally suitable for numerous applications apart from brake systems. **WARNING: Cancer- www.P65Warnings.ca.gov

Show More Show Less

Leichtlauf High Tech Engine Oil (5w-40) - Case Of 12

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:588077

Part#: 2331/12KT

In Stock

Sale - Save 5% $ 126.00

$ 119.70 USD

Add to Wish List

Qty

Sale - Save 5% $ 126.00

$ 119.70 USD

Add to Wish List

5W-40 Molygen New Generation Engine Oil - Case Of 12

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:588071

Part#: 20230/12KT

In Stock

Sale - Save 5% $ 119.99

$ 113.89 USD

Add to Wish List

Qty

Sale - Save 5% $ 119.99

$ 113.89 USD

Add to Wish List

5W-40 Molygen New Generation Engine Oil - Case Of 12 is engineered to provide superior protection and performance for modern engines. This advanced engine oil is formulated with high-quality synthetic base oils and innovative additives, ensuring optimal lubrication and enhanced efficiency. Ideal for both gasoline and diesel engines, this oil delivers excellent wear protection, thermal stability, and cleanliness. By choosing Molygen New Generation Engine Oil, vehicle owners can experience smoother engine operation and improved fuel efficiency. This case of 12 bottles ensures that you have an ample supply for regular maintenance, keeping your engine in top condition and prolonging its lifespan.

Key Benefits:

Superior Protection: Formulated to minimize engine wear and extend engine life.
Enhanced Efficiency: Provides excellent fuel economy and reduces emissions.
Thermal Stability: Maintains viscosity and performance in extreme temperatures.
Clean Engine: Keeps engine components clean by preventing sludge and deposit buildup.
Convenient Packaging: Case of 12 ensures you always have the oil you need for maintenance.

Show More Show Less

Exhaust Clamp

T#:586692

Part#: 18307606136

In Stock

$ 30.55 USD

Add to Wish List

Qty

$ 30.55 USD

Add to Wish List

Special Tec LL 5W-30 Motor Oil - Case Of 12

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:588073

Part#: 2248/12KT

In Stock

Sale - Save 5% $ 117.99

$ 111.61 USD

Add to Wish List

Qty

Sale - Save 5% $ 117.99

$ 111.61 USD

Add to Wish List

Liqui-Moly Air-Conditioner System Cleaner Gun

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:637244

Part#: 4090

In Stock

Sale - Save 5% $ 125.99

$ 119.69 USD

Add to Wish List

Qty

Sale - Save 5% $ 125.99

$ 119.69 USD

Add to Wish List

Special cleaning gun for optimum application of the specially developed Air Conditioning System Cleaning Fluid, Part. No. 4091/4092/9001/20915/20841. Enables optimum atomization of the cleaning fluid and thanks to the spherical spray jet ensures 99.9 % removal of mold and bacteria such as legionellae from the air conditioning system. The very flexible spray probe allows even the most remote corners to be reached. Developed specially for cleaning air conditioning systems in passenger cars, commercial vehicles, and buses as well as in homes.

Show More Show Less

Longtime High Tech Engine Oil (5w-30) - Case Of 12

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:588075

Part#: 2038/12KT

In Stock

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

Top Tec 1800 Automatic Transmission Fluid - 20 Liters

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:2027101

Part#: 20034

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Liqui Moly Top Tec 1800 Automatic Transmission Fluid - 20 Liters

Fully synthetic leading-edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears. The use of modern additive technology provides ultimate protection, longer fluid life, and stability combined with ideal shift quality under all operating conditions.

Properties:

Excellent viscosity/temperature properties
Prevents foam formation
Enables a multifaceted range of applications
Outstanding friction characteristics
High resistance to aging
Very good low-temperature properties
Excellent corrosion protection
Very wear-resistant
Outstanding resistance to oxidation

Approvals:

Dexron VI

Ford Mercon LV

LiquiMoly recommends this product for vehicles that need to comply with the following specifications:

Aisin Warner AW-1
BMW 83 22 0 142 516
BMW 83 22 2 152 426
BMW 83 22 2 289 720
BMW 83 22 2 305 396
BMW 83 22 2 305 397
BMW 83 22 2 355 599
BMW M-1375.4
MB 236.12
MB 236.14
VW G 055 005
VW G 055 540
VW G 060 162

Show More Show Less

18x9" ET30 Anthracite APEX EC-7RS Forged Wheel

T#:11170593

Part#: EC7RS189ET30AN

In Stock

$ 689.00 USD

Add to Wish List

Qty

$ 689.00 USD

Add to Wish List

Pro-Line Automatic Transmission Cleaner - 1 Liter

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:25839044

Part#: 20224

In Stock

Sale - Save 10% $ 29.99

$ 26.99 USD

Add to Wish List

Qty

Sale - Save 10% $ 29.99

$ 26.99 USD

Add to Wish List

Elevate your automatic transmission's performance and lifespan with Liqui Moly's advanced cleaning fluid:

Dissolves problematic deposits and residues for optimized gear shift performance.
Extends transmission service life by effectively cleaning sludge and lacquer formers.
Gentle cleaning action preserves rubber and plastic seals.
Optimizes economical use, ensuring cost-effective maintenance.
Effortlessly tackles stubborn dirt for a thorough clean.
Suitable for all automatic transmissions, providing universal compatibility.
Convenient application with Liqui Moly Gear Tronic for enhanced effectiveness.

Show More Show Less

18" APEX ARC-8 Square Wheel Set

T#:19395576

Part#: ARC818930SQ

Ships in 2 Business Days

Starting at $ 1,476.00 USD

Add to Wish List

Starting at $ 1,476.00 USD

Add to Wish List

Apex ARC8 18x9" ET30 Wheel Set Apex 8.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" VS5RS APEX Square Wheel Set

T#:19428670

Part#: VS5RS181025SQ

Back Ordered

Starting at $ 2,636.00 USD

Add to Wish List

Starting at $ 2,636.00 USD

Add to Wish List

Apex VS5RS 18x10" ET25 Wheel Set Apex 10" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

Liqui Moly Synthoil Premium Engine Oil (5w-40) - Case Of 12

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:588074

Part#: 2040/12KT

In Stock

Sale - Save 10% $ 180.00

$ 162.00 USD

Add to Wish List

Qty

Sale - Save 10% $ 180.00

$ 162.00 USD

Add to Wish List

Synthoil Premium Engine Oil (5w-40) - Case Of 12

Ensure optimal performance and protection for your BMW engine with the Synthoil Premium Engine Oil (5w-40) - Case Of 12. Crafted to meet the high demands of modern engines, this engine oil is a top-tier synthetic blend that offers superior lubrication and engine cleanliness. With a carefully formulated composition, it provides outstanding wear protection, maintains stability under extreme temperatures, and minimizes deposits, promoting engine longevity and efficiency.

Key Benefits:

Superior engine protection and lubrication
Maintains stability in extreme temperatures
Minimizes engine deposits for cleaner operation
Ensures outstanding wear protection for engine components
Promotes engine longevity and efficiency

Show More Show Less

18" APEX ML-10RT Forged Wheels - Staggered Set Of Four

T#:31788333

Part#: ML10181040120AKT

In Stock

$ 2,816.00 USD

Add to Wish List

Qty

$ 2,816.00 USD

Add to Wish List

Liqui Moly Universal Cleaner - 1 Liter

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:587533

Part#: 20396

In Stock

Sale - Save 10% $ 26.99

$ 24.29 USD

Add to Wish List

Qty

Sale - Save 10% $ 26.99

$ 24.29 USD

Add to Wish List

Concentrated Universal Cleaner that can be diluted with water. Phosphate-free, silicate-free and solvent-free. Biologically degradable. For mixing ratios up to 1:2,000, depending on the application. Application: Can be applied by spraying or immersion, or wiping with brushes, cloths or sponges. Cleaning by spraying: Dilute with water according to requirements and spray it onto the surface of the object. Allow cleaner to act for a brief period before rinsing off with water. Cleaning by immersion: Dilute with water according to requirements. Immerse the object and rinse off with water after allowing the cleaner to act for short time. Wiping: Dilute with water according to requirements and apply to dry or pre-dampened surface. Allow cleaner to act for a brief period before rinsing off. Note: Do not use in concentrated form or allow to dry onto surface to be cleaned. Treat non-ferrous heavy metals and light alloys only briefly and rinse thoroughly with water. The product has a powerful degreasing effect and if used repeatedly in high concentrations will cause colors to fade. Always test on hidden areas first if using on sensitive materials. Mixing ratio with water for various applications: Cleaning engines, engine compartments, bodies, door edges, truck tarpaulins and superstructures 1:5 to 1:10 Removal of insect remains 1:10 Cleaning wheel rims 1:2 to 1:5 Machine tools 1:10 to 1:40 Plastic covers 1:10 to 1:20 Workshop floors and walls - manually - 1:20 to 1:40 Road tunnels, boundary posts - mechanically - 1:40 to 1:60 Chemical pre-wash in brush systems 1:5 to 1:10 High-pressure and steam jet appliances 1:10 to 1:20 Copolymere de-waxers 1:3 to 1:5 Workshop windows, glass panes 1:500 to 1:2,000 Vehicle interiors 1:10 to 1:50

Show More Show Less

APEX ARC-8 18x10" ET25 Anthracite Concave Wheel 19.95lbs ...

T#:180706

Part#: ARC81810ET25AN

In Stock

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

18x10" ET25 Anthracite Concave APEX ARC-8 Wheel 19.95lbs

Wheel Specs
Fitment:	Rear
Size:	18x10.0"
Offset (mm):	25
Weight (lbs):	19.95
Profile:	Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

In Stock

$ 45.00 USD

Add to Wish List

Qty

$ 45.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

17" APEX ARC-8 Square Wheel Set

T#:19395591

Part#: ARC817942SQ

Ships in 9 Business Days

Starting at $ 1,316.00 USD

Add to Wish List

Starting at $ 1,316.00 USD

Add to Wish List

Apex ARC8 17x9" ET42 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" APEX FL-5 Square Wheel Set

T#:19395580

Part#: FL518930SQ

Ships in 5 Business Days

Starting at $ 1,716.00 USD

Add to Wish List

Starting at $ 1,716.00 USD

Add to Wish List

Apex FL-5 18x9" ET30 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

Apex EC-7 19" Staggered Wheel Set - Race Silver

T#:599071

Part#: EC71995ET28RSKT

Ships in 5 Business Days

$ 1,836.00 USD

Add to Wish List

Qty

$ 1,836.00 USD

Add to Wish List

Specifications: Color - Race Silver Size Front - 19x9.5" ET28 Size Rear - 19x10.5" ET45

APEX ARC-8 17x9" ET30 Matte Bronze Wheel 16.55lbs

T#:637215

Part#: ARC8179ET30MBZ

Special Order: No Guaranteed ETA

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs

T#:201362

Part#: EC71995ET22SMBK

Ships in 5 Business Days

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

18" APEX SM-10 Square Wheel Set

T#:19395583

Part#: SM1018930SQ

Ships on Aug 13, 2025

Starting at $ 1,696.00 USD

Add to Wish List

Starting at $ 1,696.00 USD

Add to Wish List

Apex SM-10 18x9" ET30 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs

T#:201373

Part#: EC71910ET25AN

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Ceramic Paste - 200mL

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:403011

Part#: 20242

Ships Jul 22, 2025

Sale - Save 10% $ 45.99

$ 41.28 USD

Add to Wish List

Qty

Sale - Save 10% $ 45.99

$ 41.28 USD

Add to Wish List

Discover Liqui Moly Ceramic Paste - 200mL , a versatile solution designed for a multitude of applications. Its advanced formulation delivers exceptional adhesion and high temperature resistance, making it indispensable as a release agent to thwart seizing, cold welding, rust freezing, and stick-slip. With its metal-free and non-conductive composition, it's perfectly suited for use with aluminum and magnesium materials. Embracing a broad application range from -40°C to +1,400°C (-104°F to +2,552°F) , it excels under diverse conditions. Whether you require high-temperature or anti-seize lubrication, or general lubrication for threaded fasteners, trust in Liqui Moly Ceramic Paste for reliable performance.

Show More Show Less

18" APEX EC-7 Square Wheel Set

T#:19395578

Part#: EC718931SQ

Back Ordered

Starting at $ 1,556.00 USD

Add to Wish List

Starting at $ 1,556.00 USD

Add to Wish List

Apex ARC8 18x9" ET31 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

Synthoil Energy Engine Oil A40 (0w-40) - Case Of 12

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:588072

Part#: 2049/12KT

In Stock

Sale - Save 5% $ 143.99

$ 136.69 USD

Add to Wish List

Qty

Sale - Save 5% $ 143.99

$ 136.69 USD

Add to Wish List

Liqui-Moly Top Tec ATF 1800 Synthetic Automatic Transmission Fluid - ...

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:554450

Part#: 20032

In Stock

Sale - Save 5% $ 9.50

$ 9.03 USD

Add to Wish List

Qty

Sale - Save 5% $ 9.50

$ 9.03 USD

Add to Wish List

For modern automatic transmissions, hybrid transaxle systems, and electric drive differentials where an ATF fluid meeting current product specifications is required. Fully synthetic leading-edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears. The use of modern additive technology provides ultimate protection, longer fluid life, and stability combined with ideal shift quality under all operating conditions. Properties: excellent viscosity/temperature properties prevents foam formation enables a multifaceted range of applications outstanding friction characteristics high resistance to aging very good low-temperature properties excellent corrosion protection high wear resistance outstanding resistance to oxidation

Show More Show Less

Liqui-Moly Power Steering Fluid Stop-Leak - 35mL

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:638938

Part#: 20284

In Stock

Sale - Save 5% $ 6.99

$ 6.64 USD

Add to Wish List

Qty

Sale - Save 5% $ 6.99

$ 6.64 USD

Add to Wish List

Put a stop to that leak in your hydraulic power steering system

Liqui-Moly Ceramic Paste - 250g

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:599298

Part#: 22094

In Stock

Sale - Save 12% $ 55.99

$ 49.55 USD

Add to Wish List

Qty

Sale - Save 12% $ 55.99

$ 49.55 USD

Add to Wish List

Ceramic paste is a modern, multifunctional formulation that can be used for most common standard paste applications. Due to its high adhesion and temperature resistance, Ceramic Paste can be used as a release agent, for lubrication and to protect against corrosion and wear. Suitable for use with aluminum and magnesium materials. Properties resistant to certain organic acids and alkalis prevents stick-slip good water resistance prevents seizing and cold welding does not attack common sealing materials prevents brake noise highest load-carrying capacity non-toxic Used for lubricating all types of high-load sliding surfaces. Used especially for low slide speeds and/or oscillating movements. and for screw, plug-in, and bayonet connectors made from steel and non-ferrous metals. Separation of components subject to heat stress, such as internal combustion engines, turbines, and motor vehicle brake systems. Corrosion protection of bolts, pins, studs, flanges, spindles and seatings in refineries, steel and cement works, as well as shipping and agricultural engineering.

Show More Show Less

LiquiMoly DOT 5.1 Brake Fluid - 250ml

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:2027103

Part#: 20158

In Stock

Sale - Save 5% $ 4.99

$ 4.74 USD

Add to Wish List

Qty

Sale - Save 5% $ 4.99

$ 4.74 USD

Add to Wish List

Synthetic formulation based on glycol ethers, alkyl polyglycols, and glycol ether esters which guarantees full function even during extreme conditions. A higher wet and dry boiling point compared to DOT 3 and DOT 4 brake fluids and unique inhibitors provide corrosion and oxidation protection at high temperatures. Special scavengers are used to suppress steam at increased moisture levels. For hydraulic systems that specify a fluid consistent with current product specifications. Observe the manufacturer's instructions! Properties: excellent viscosity/temperature properties high thermal stability miscible and compatible with high-quality synthetic brake fluids assures a high degree of lubricating action on all moving components in the hydraulic brake circuit outstanding protection against the formation of steam bubbles excellent elastomer compatibility excellent low-temperature behavior extremely high wet and dry boiling points Approvals: FMVSS 116 DOT 3 FMVSS 116 DOT 4 FMVSS 116 DOT 5.1 ISO 4925 Class 3 ISO 4925 Class 4 ISO 4925 Class 5.1 SAE J 1703 SAE J 1704

Show More Show Less

Liqui-Moly ATF Additive - 250mL

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:1195998

Part#: 20040

In Stock

Sale - Save 5% $ 12.99

$ 12.34 USD

Add to Wish List

Qty

Sale - Save 5% $ 12.99

$ 12.34 USD

Add to Wish List

Can be added to the power steering reservoir or automatic transmission

Liqui-Moly Radiator Stop-Leak - 250mL

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:402989

Part#: 20132

In Stock

Sale - Save 5% $ 6.99

$ 6.64 USD

Add to Wish List

Qty

Sale - Save 5% $ 6.99

$ 6.64 USD

Add to Wish List

It’s not easy to find small leaks caused by stone chipping, porous soldered connections or hairline fractures in the cooling system on all water-cooled engines – the only clue is in the reduced coolant level. Radiator Sealant seals these types of leaks completely, easily and in an instant and safeguards the combustion chamber against damage caused by coolant ingress.

Show More Show Less

Liqui-Moly Motor Oil Saver - 300mL - BMW & MINI

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:552770

Part#: 2020

In Stock

Sale - Save 10% $ 11.99

$ 10.79 USD

Add to Wish List

Qty

Sale - Save 10% $ 11.99

$ 10.79 USD

Add to Wish List

Rejuvenates and regenerates dried out, porous or shrunken oil and valve stem seals, thus reduces motor oil consumption and increases the compression. One can treats up to 5 liters of oil. 3 liters of oil minimum required for treatment.

Show More Show Less

500mL Pro-Line Fuel System Cleaner

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:403017

Part#: 2030KT

In Stock

Sale - Save 5% $ 17.99

$ 17.09 USD

Add to Wish List

Qty

Sale - Save 5% $ 17.99

$ 17.09 USD

Add to Wish List

Liqui-Moly Pro-Line Diesel Intake System Cleaner - 400mL

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:402995

Part#: 20208KT

In Stock

Sale - Save 5% $ 12.00

$ 11.40 USD

Add to Wish List

Qty

Sale - Save 5% $ 12.00

$ 11.40 USD

Add to Wish List

Special active solvent with a high-tech additive combination for removing typical dirt and deposits in the intake and throttle valve area. Loosens and removes greasy deposits and dirt such as oil, soot, etc. It guarantees the functional performance of the moving parts and reduces fuel consumption. Increases the reliability of diesel-powered engines. Recommended for preventative use during an inspection. Suitable for vehicles with EGR valve and DPF.

Show More Show Less

APEX Wheels Metal Valve Stem - Silver - BMW & MINI

T#:593646

Part#: HW-OEM-VALVE-SV

Ships in 2 Business Days

$ 16.00 USD

Add to Wish List

Qty

$ 16.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

LiquiMoly Brake Fluid DOT 4 - 500ml

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:2011670

Part#: 20154

In Stock

Sale - Save 5% $ 5.99

$ 5.69 USD

Add to Wish List

Qty

Sale - Save 5% $ 5.99

$ 5.69 USD

Add to Wish List

Synthetic formulation based on glycol ethers, alkyl polyglycols, and glycol ether esters. A high wet and dry boiling point and unique inhibitors provide corrosion and oxidation protection at high temperatures which guarantees full function even during extreme conditions. Special scavengers are used to suppress steam at increased moisture levels. For hydraulic systems that specify a fluid consistent with current product specifications. Observe the manufacturer's instructions! Properties: miscible and compatible with high-quality synthetic brake fluids outstanding protection against the formation of steam bubbles excellent elastomer compatibility assures a high degree of lubricating action on all moving components in the hydraulic brake circuit extremely high wet and dry boiling points excellent viscosity/temperature properties excellent low-temperature behavior highest thermal stability Approvals: FMVSS 116 DOT 3 FMVSS 116 DOT 4 ISO 4925 Class 3 ISO 4925 Class 4 SAE J 1703 SAE J 1704

Show More Show Less

Liqui-Moly Viscoplus For Oil - 300mL

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:638939

Part#: 20206

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

High performance additive for stabilizing the viscosity of motor oil

Liqui Moly Manual Transmission / Differential Fluid 85w90 - 1 Liter ...

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:394669

Part#: 20010

In Stock

Sale - Save 11% $ 9.99

$ 8.93 USD

Add to Wish List

Qty

Sale - Save 11% $ 9.99

$ 8.93 USD

Add to Wish List

Interval transmission fluid changes are often recommended for manual transmissions to ensure long-term reliability and maximum wear prevention. Fresh fluid will prevent small amounts of metallic build up from preventing fluid flow and clogging filters and narrow channels.

Show More Show Less

1 Liter Fully Synthetic Gear Oil 75w90

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:597546

Part#: 22090

In Stock

Sale - Save 5% $ 17.99

$ 17.09 USD

Add to Wish List

Qty

Sale - Save 5% $ 17.99

$ 17.09 USD

Add to Wish List

Maintain the longevity of your BMW's manual transmission and differential by incorporating this fully synthetic 75w90 weight gear oil into your maintenance routine. Flushing and replacing fluids at specified intervals, as per your owner's manual, is crucial to prevent costly issues in the future. Explore the benefits of this gear oil:

Specifically designed for BMW manual transmissions.
Fully synthetic hypoid gear oil for high performance.
Excellent protection in diverse weather conditions.
Maximum wear protection and precise functionality.
Enables longer oil change intervals.

Meets Specifications:

API GL4, GL5, MT-1
MIL-PRF 2105 E

Show More Show Less

Liqui-Moly Multi Purpose Grease - 400g

10X Entries For Our Spin To Win Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:1196000

Part#: 20246

In Stock

Sale - Save 5% $ 5.18

$ 4.92 USD

Add to Wish List

Qty

Sale - Save 5% $ 5.18

$ 4.92 USD

Add to Wish List

Universal high performance grease for automotive use

Project Cars

SELECT YOUR BMW

Sub-Categories

Benefits:

Key Benefits:

Liqui Moly Top Tec 1800 Automatic Transmission Fluid - 20 Liters

Properties:

Approvals:

Synthoil Premium Engine Oil (5w-40) - Case Of 12

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results