BMW Engine Parts for BMW X Series E84 (2013-2015)

Valvetronic Actuator Replacement Kit - BMW N55 S55 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:599759

Part#: 11377603979KT2

In Stock

Sale - Save 10% $ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD

Add to Wish List

Qty

Sale - Save 10%

$ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD

Add to Wish List

Includes actuator, actuator gasket and valve cover gaskets

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

2X Entries Into Our F80 M3 Sweepstakes

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

Engine Main Bearing Kit - Standard Size

Standard Size

T#:599337

Part#: MB7776SI

In Stock

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Valve Cover Kit - BMW N20 2.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:5649970

Part#: 11127588412KT

In Stock

Sale - Save 18% $ 228.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.18 USD

Add to Wish List

Qty

Sale - Save 18%

$ 228.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.18 USD

Add to Wish List

Plastic valve covers are prone to warping and becoming brittle over time due to exposure to hundreds of heat cycles. This often leads to cracks or splits that leak oil or check engine lights for vacuum issues. Replacing your worn-out valve cover with a brand new unit is the best option to ensure oil leaks are eliminated and PCV and Vacuum issues no longer result in poor performance. Also includes gaskets, hardware, and a brand new Genuine BMW PCV vent pipe to make changing out your valve cover quick and easy!

Show More Show Less

Engine Main Bearing Kit - Size 0.25 Oversized

+0.25mm

T#:597154

Part#: MB7776SI0.25

In Stock

$ 118.99 USD

Add to Wish List

Qty

$ 118.99 USD

Add to Wish List

Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.

Show More Show Less

Bremmen Parts Chain Tensioner - With Gasket Ring

10X Entries Into Our F80 M3 Sweepstakes

T#:556062

Part#: 11317584723

In Stock

Sale - Save 15% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

Qty

Sale - Save 15%

$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

Addresses chain slap or other noise caused by a failed or failing tensioner

Automatic Transmission Oil Pan With Transmission Filter - BMW E9X E82...

10X Entries Into Our F80 M3 Sweepstakes

T#:640488

Part#: 24117571217

In Stock

Sale - Save 13% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

Qty

Sale - Save 13%

$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

GA6HP19Z Automatic Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This filter fits GA6HP19Z automatic transmissions. This will NOT fit the GA6L45R transmission. Please check your transmission to ensure it is the correct type. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Bremmen Cylinder Head Valve Cover - with PCV Valve & Gasket - BMW F22...

10X Entries Into Our F80 M3 Sweepstakes
For vehicles with the N20 engine only (NON-SULEV)

T#:3657924

Part#: 11127588412

In Stock

Sale - Save 20% $ 165.99

This product was last offered at the strikethrough price on
05-03-2026

$ 132.18 USD

Add to Wish List

Qty

Sale - Save 20%

$ 165.99

This product was last offered at the strikethrough price on
05-03-2026

$ 132.18 USD

Add to Wish List

Years of excessive can cause the plastics of your valve cover to become warp or become hard and brittle, leading to cracking and potential oil leak issues. If you are experiencing oil loss, vacuum issues, or even poor running conditions, your valve cover may be the reason why.

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Vargas Ignition Coil Kit (Blue) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309605

Part#: VTT-COIL-N5X-BLU

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Valve Cover Kit - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:5376284

Part#: 11127570292TKT

In Stock

Sale - Save 5% $ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 304.52 USD

Add to Wish List

Qty

Sale - Save 5%

$ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 304.52 USD

Add to Wish List

If your valve cover has become cracked or warped, replace it with this Hamburg Tech cover from Turner Motorsport to prevent leaks and further valvetrain damage. Replace your leaking valve cover to keep your oil inside the engine, where it belongs. Includes everything needed to install a new valve cover: Valve cover Gasket flange Crank case vent hose Hardware

Show More Show Less

Wastegate Actuator With Hardware - N20 2.0L Engine

10X Entries Into Our F80 M3 Sweepstakes

T#:5416783

Part#: 11657638783TMSKT

In Stock

Sale - Save 13% $ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.05 USD

Add to Wish List

Qty

Sale - Save 13%

$ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.05 USD

Add to Wish List

Located on the exhaust manifold, includes new mounting hardware. The wastegate actuator releases excess boost pressure. A failed unit may result in a boost leak, reduced performance, and, ultimately, turbocharger failure. If your wastegate actuator has failed, replace it with this OEM part from Turner Motorsport to restore performance and prolong engine life.

Show More Show Less

Vargas Ignition Coil Kit (Red) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309610

Part#: VTT-COIL-N5X-RED

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Delphi - Factory Spec Ignition Service Kit - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:5498500

Part#: 12137594937IGKT

Ships in 3 Business Days

Sale - Save 5% $ 336.99

This product was last offered at the strikethrough price on
07-27-2026

$ 318.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 336.99

This product was last offered at the strikethrough price on
07-27-2026

$ 318.59 USD

Add to Wish List

If your BMW's mileage is getting up there, be sure to keep your ignition system in check. Whether you currently have a misfire or you're just doing preventative maintenance, this kit is perfect. The kit includes: 6 Delphi Coils with locks 6 Bosch spark plugs BMW spark plug service label for your records 1 packet of American Grease Stick dielectric grease The kit includes: 6 Bremi Coils with locks 6 Bosch spark plugs BMW spark plug service label for your records 1 packet of American Grease Stick dielectric grease

Show More Show Less

Bremmen Engine Oil Pan - F3X F2X F10 RWD (N20/26 2.0L)

10X Entries Into Our F80 M3 Sweepstakes
For RWD models only!

T#:2393340

Part#: 11137618512

In Stock

Sale - Save 50% $ 110.99

This product was last offered at the strikethrough price on
05-03-2026

$ 55.50 USD

Add to Wish List

Qty

Sale - Save 50%

$ 110.99

This product was last offered at the strikethrough price on
05-03-2026

$ 55.50 USD

Add to Wish List

If your oil pan has been damaged because of road debris or the vehicle bottoming out, it is important to replace the oil pan asap to ensure that further damage doesn't lead to a crack or leak that would potentially lead to massive engine failure.

Show More Show Less

OEM Ignition Service Kit - N20 2.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:556723

Part#: N20TISKT

In Stock

$ 218.60 USD

Add to Wish List

Qty

$ 218.60 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

MMX Performance - 4-Pin One-Piece Crank Hub Upgrade Kit - With MMR Ca...

T#:45039725

Part#: MMR20-1004FK

Ships in 3 Business Days

$ 1,227.99 USD

Add to Wish List

Qty

$ 1,227.99 USD

Add to Wish List

The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.

Show More Show Less

Universal Valve Spring Compressor

T#:1809130

Part#: W89409

Ships in 1 Business Day

$ 126.99 USD

Add to Wish List

Qty

$ 126.99 USD

Add to Wish List

For servicing overhead valve engine with cylinder head removed.

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Bosch - Factory Spec Ignition Service Kit - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:556734

Part#: N55TISKT

In Stock

$ 276.99 USD

Add to Wish List

Qty

$ 276.99 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

MMX Oil Filter Housing - Black

T#:4552065

Part#: MMR03-0101-BL

Ships in 1 Business Day

$ 142.99 USD

Add to Wish List

Qty

$ 142.99 USD

Add to Wish List

If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

Show More Show Less

MMR Crank Hub Kit - N55/S55

T#:4565824

Part#: MMR20-1003FK

Ships in 2 Business Days

$ 849.99 USD

Add to Wish List

Qty

$ 849.99 USD

Add to Wish List

Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Blue - BMW N52 N5...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122267

Part#: VTTFILTERCAPBLUE

Ships in 5 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Clear - BMW N52 N...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122266

Part#: VTTFILTERCAPCLR

Ships in 1 Business Day

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

S55 / N55 One-Piece Crank Hub Upgrade Kit - 4-Pin

T#:19891361

Part#: MMR20-1004

Ships in 1 Business Day

$ 1,064.99 USD

Add to Wish List

Qty

$ 1,064.99 USD

Add to Wish List

Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

2X Entries Into Our F80 M3 Sweepstakes

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 6 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

OMP Battery Cut Off Switch / Kill Switch

T#:1614

Part#: EA-462

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Red - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122280

Part#: TRIPLECAPRED1

Ships in 10 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

OEM Hengst Engine Oil Filter Kit - Pack of 10 - N20 N52 N54 N55 ...

5X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:567542

Part#: 11427566327

In Stock

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Hengst oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.

Show More Show Less

Turbocharger Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:598822

Part#: 11657625293KT3

Ships in 2 Business Days

Sale - Save 9% $ 204.39

This product was last offered at the strikethrough price on
06-10-2026

$ 186.46 USD

Add to Wish List

Qty

Sale - Save 9%

$ 204.39

This product was last offered at the strikethrough price on
06-10-2026

$ 186.46 USD

Add to Wish List

Reusing old hardware and gaskets can often lead to oil and exhaust leaks. To prevent this, we have assembled this kit which includes all of the basic components needed to install a turbo upgrade or a re-built turbo on your N20.

Show More Show Less

Oil Cooler Housing Gasket Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:637847

Part#: 11428637820KT1

In Stock

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

High Pressure Fuel Pump Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:5389771

Part#: N55HPFKKT

In Stock

$ 1,783.99

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.99 USD

Add to Wish List

Qty

$ 1,743.99 USD

Add to Wish List

HPFP woes? Replacement high pressure exchange pump for the N55 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket High pressure fuel sensor No core charge required!

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Clear - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122281

Part#: TRIPLECAPCLR1

Ships in 10 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Black - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122279

Part#: TRIPLECAPBLK1

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Red - BMW N52 N54...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122265

Part#: VTTFILTERCAPRED

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Vargas Ignition Coil Kit (Black) - N5x

2X Entries Into Our F80 M3 Sweepstakes

T#:5309609

Part#: VTT-COIL-N5X-BLK

Ships in 10 Business Days

$ 167.99 USD

Add to Wish List

Qty

$ 167.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Black - BMW N52 N...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122264

Part#: VTTFILTERCAPBLK

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Spline Lock Crank Hub Solution

2X Entries Into Our F80 M3 Sweepstakes

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

VTT N5X/S55/N2X Triple Billet Cap Kit - Blue - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122282

Part#: TRIPLECAPBLUE1

In Stock

$ 251.99

This product was last offered at the strikethrough price on
08-12-2026

$ 226.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 251.99

This product was last offered at the strikethrough price on
08-12-2026

$ 226.99 USD

Limited Qty Sale

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

2X Entries Into Our F80 M3 Sweepstakes

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

Vargas Billet Adapter With Straight Gate For EWG DCS - BMW

2X Entries Into Our F80 M3 Sweepstakes

T#:52094551

Part#: VTT-DCS-EWG-ONLY

Ships in 10 Business Days

$ 839.99 USD

Add to Wish List

Qty

$ 839.99 USD

Add to Wish List

The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.

Vargas Crank/Vibration Damper Bolts - M10 x 1.5

2X Entries Into Our F80 M3 Sweepstakes

T#:51778130

Part#: VTT-BMW-DAMPER-B

Ships in 10 Business Days

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.

EWG BILLET CNC Valve Cover - Red

2X Entries Into Our F80 M3 Sweepstakes

T#:41695014

Part#: VTTS55BILLETVCRE

Ships in 10 Business Days

$ 1,519.99 USD

Add to Wish List

Qty

$ 1,519.99 USD

Add to Wish List

Absolutely — here’s a reworded version of the product description in the ECS Tuning dialect, capturing the same details with a more engaging and enthusiast-focused tone: --- **VTT Billet CNC Valve Cover – S55/N55 EWG** Say goodbye to brittle factory plastics and elevate your engine bay with the Vargas Turbo Technologies Billet CNC Valve Cover – the ultimate solution for BMW S55 and N55 EWG owners chasing reliability, performance, and high-end style. Precision-crafted from 100% CNC-machined 6061-T6 aircraft-grade aluminum, this cover ditches the OEM failure-prone plastic for a rugged, motorsport-ready upgrade that’s built to take the heat – and the boost. ### Why It Belongs in Your Build: * **Bulletproof Construction:** Solid billet aluminum means no cracks, no leaks – just unshakable strength that outlasts stock plastic by miles. * **Performance-Minded Weight:** At only 9.7 lbs, it’s a lightweight beast – just 1.8 lbs heavier than stock, but loaded with benefits. * **Anodized Armor:** Dress your engine bay with anodized color options – choose clear, black, red, blue, or gold to match your vibe. * **Custom PCV Configs:** Kills the fragile OEM PCV setup and gives you flexibility for a clean, powerful crankcase solution – whether you're keeping it stock or running a full catch can. * **Baffled to Perfection:** Integrated baffling keeps oil where it belongs, not in your intake tract. * **All-In Kit:** Comes ready to rock with ORB plugs or banjo fittings, plus -10 silicone hose – install and go. ### Heads Up on Install: Upgrading to this billet beauty wipes out the stock PCV – and that's a good thing. But to keep your engine breathing right, you’ll need an external PCV setup to maintain crankcase vacuum at idle. Want max reliability? Block off those head ports and let this cover handle the pressure without relying on a gasket alone. ### Built for Big Power: If you're running a single turbo conversion, this is your cover. It offers cleaner lines, better heat resistance, and improved fitment where it counts. ### Customize Your Cover: * **Finish Options:** Clear, black, red, blue, or gold anodizing. * **Breather Cap Choices:** Stock-style oil cap or a VTT billet one-way breather. * **Fitting Options:** Dual -10 ORB plugs, or go hybrid with a banjo and plug. * **Titanium Hardware:** Add some flair with black, burnt, or natural finish Ti bolts. * **Catch Can Ready:** Pair with VTT’s catch can for a full crankcase solution. ### Backed by VTT: Includes a 12-month warranty for confidence on and off the track. ### Price: Starting at \$1,499.00 – premium build, race-ready features, and engine bay clout to match. --- Let me know if you want this in shorter format for a product listing, social caption, or email drop.

Show More Show Less