BMW Z Series E85/6 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Automatic Transmission Service Kit - Level 2 - BMW GA6HP19Z Transmiss...
For vehicles equipped with automatic transmission GA6HP19Z *** Check Transmission Type Prior To Orde
Packaged by Turner - Corporate Logo
T#:5376301
Part#: 24117571217TMSKT
In Stock
Sale - Save 10% $ 175.99

This product was last offered at the strikethrough price on
05-03-2026

$ 157.62 USD
Free Shipping
Sale - Save 10%
$ 175.99

This product was last offered at the strikethrough price on
05-03-2026

$ 157.62 USD
Free Shipping
Includes all the necessary components for a complete transmission service with Liqui Moly fluid Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission oil pan with integrated filter Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 quarts Liqui Moly automatic transmission fluid
Show More Show Less
Packaged by Turner - Corporate Logo
T#:17073598
Part#: 11537549476KT
In Stock
Sale - Save 25% $ 424.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.83 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 424.99

This product was last offered at the strikethrough price on
05-03-2026

$ 318.83 USD
Free Shipping on orders $49 and up
Includes everything you may need to replace your water pump and thermostat.
Packaged by Turner - Corporate Logo
T#:5376274
Part#: 11517586925TKT
In Stock
Sale - Save 25% $ 448.99

This product was last offered at the strikethrough price on
05-03-2026

$ 337.56 USD
Free Shipping
Sale - Save 25%
$ 448.99

This product was last offered at the strikethrough price on
05-03-2026

$ 337.56 USD
Free Shipping
Everything you need to replace your water pump and thermostat. The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road. Kit includes: Mahle-Behr thermostat Water pump Genuine BMW coolant thermostat to water pump hose Mounting hardware required for both the thermostat and water pump
Show More Show Less

Packaged by Turner - Corporate Logo
T#:15677580
Part#: 11427540759-KT
In Stock
Sale - Save 1% $ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD
Free Shipping on orders $49 and up
This kit includes: 1 Oil Filter Housing Gasket (11428637821) 1 M8x28 bolt (11427540759) 1 M8x43 bolt (11427540763) 1 M8x78 bolt (11427540758) 1 Oil Pressure Sensor (12617568480)

Packaged by Turner - Corporate Logo
T#:25805743
Part#: 11367585425TKT
In Stock
Sale - Save 25% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.
Show More Show Less
High-Performance Ignition Service Kit - BMW N52 3.0L
For vehicles with production date from 04/2006
Packaged by Turner - Corporate Logo
T#:583536
Part#: N52PISKT
In Stock
Sale - Save 20% $ 243.99

This product was last offered at the strikethrough price on
05-03-2026

$ 194.75 USD
Free Shipping
Sale - Save 20%
$ 243.99

This product was last offered at the strikethrough price on
05-03-2026

$ 194.75 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Oil Pan Gasket - With Bolts
Bolts Are For Vehicles With Automatic Transmission ONLY
Packaged by Turner - Corporate Logo
T#:5403247
Part#: 11132210959TMSKT
In Stock
Sale - Save 3% $ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD
Free Shipping
Sale - Save 3%
$ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD
Free Shipping
Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.
Packaged by Turner - Corporate Logo
T#:401664
Part#: VSK4KT2
In Stock
$ 143.84 USD
Free Shipping
$ 143.84 USD
Free Shipping

Proper valve lash adjustment is critical for longevity and performance. If your S54 is due for valve adjustment maintenance you can do it yourself with this kit, saving hundreds of dollars in labor charges. 

Includes

  • Shim set 
  • Installation tool #83300493743
  • 16 Blade Feeler gauge set 

BMW recommends S54 valve inspection and adjustment every 30k miles.

*Click here for valve adjustment instructions*

Show More Show Less

Packaged by Turner - Corporate Logo
T#:392550
Part#: S54RBPDK
In Stock
Starting at $ 455.97 USD
Free Shipping
Starting at $ 455.97 USD
Free Shipping
Replacing the rod bearings requires mechanical knowledge and skill, a clean workspace, and several specialist tools. Our preferred procedure is to leave the engine in the car but remove the front subframe. The engine must be supported from above with an engine brace. Removing the front subframe involves disconnecting the control arms and steering rack and steering column. The oil pan can then be removed and you can access the connecting rods and bearings. Replacing the rod bearings themselves is straightforward but patience and forethought will be extremely helpful. In addition to analyzing the severity of the rod bearing wear, the crankshaft must also be inspected closely for damage. Rod bearings that have been severely worn may have damaged the crankshaft (requiring replacement or machining).
Show More Show Less

Packaged by Turner - Corporate Logo
T#:578658
Part#: 65816905133-1KT
In Stock
Sale - Save 23% $ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 74.70 USD
Free Shipping
Sale - Save 23%
$ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 74.70 USD
Free Shipping
Onboard computer not reading accurate ambient temperatures anymore? This kit includes everything you need to restore external temp monitoring to your BMW.
Packaged by Turner - Corporate Logo
T#:15677547
Part#: 007237SCH01A-KT
Ships on Oct 12, 2026
Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:24344782
Part#: E46M3RWBKT
In Stock
Sale - Save 5% $ 278.99

This product was last offered at the strikethrough price on
04-20-2026

$ 266.31 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 278.99

This product was last offered at the strikethrough price on
04-20-2026

$ 266.31 USD
Free Shipping on orders $49 and up
A failing wheel bearing may translate into excessive vibration through the steering wheel, a noticeable hum while driving at speed, and/or a groan or clunking while turning. If you are experiencing any of these symptoms, your wheel bearing may be failing. This kit includes all the components commonly replaced when servicing one of the rear wheel bearings. Included: Genuine BMW Wheel Hub OEM Wheel Bearing OEM Axle Nut Genuine BMW Wheel Bearing Circlip
Show More Show Less


Packaged by Turner - Corporate Logo
T#:5512212
Part#: 11311703717KT
In Stock
Sale - Save 33% $ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Sale - Save 33%
$ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Timing Chain Kit for the BMW M50/M52/M54 engines composed of quality parts by Bremmen Parts! Kit Contents: Lower Timing Chain Tensioner Timing Chain - Lower Lower Timing Chain Guide Rail Tensioner Piston
Show More Show Less
Packaged by Turner - Corporate Logo
T#:557341
Part#: 11111318185TMSKT
In Stock
Sale - Save 2% $ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping
Sale - Save 2%
$ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

Show More Show Less
Packaged by Turner - Corporate Logo
T#:5498497
Part#: 11617544806DKT
In Stock
Sale - Save 25% $ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD
Free Shipping
Sale - Save 25%
$ 162.99

This product was last offered at the strikethrough price on
05-03-2026

$ 122.12 USD
Free Shipping
A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes. If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage. Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold. Includes new mounting hardware
Show More Show Less

Packaged by Turner - Corporate Logo
T#:24212302
Part#: 26112226527TKT
In Stock
Sale - Save 30% $ 209.99

This product was last offered at the strikethrough price on
04-16-2026

$ 147.89 USD
Free Shipping on orders $49 and up
Sale - Save 30%
$ 209.99

This product was last offered at the strikethrough price on
04-16-2026

$ 147.89 USD
Free Shipping on orders $49 and up
Comes with a flex disc (giubo), and all essential mounting hardware to ensure a complete and secure driveshaft installation.

Packaged by Turner - Corporate Logo
T#:5416751
Part#: 21526773670TMSKT
In Stock
Sale - Save 7% $ 311.99

This product was last offered at the strikethrough price on
05-03-2026

$ 289.49 USD
Free Shipping
Sale - Save 7%
$ 311.99

This product was last offered at the strikethrough price on
05-03-2026

$ 289.49 USD
Free Shipping
Includes master and slave cylinder, hardware and lines including the Exact-Fit Stainless Steel Clutch Line! A leaking clutch cylinder often feels like a failing clutch or a problematic transmission, this kit includes everything needed to not only replace but upgrade your clutch hydraulic system!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:582210
Part#: S54WVALVESHIMKT
Ships in 6 Business Days
$ 222.04

This product was last offered at the strikethrough price on
05-03-2026

$ 221.45 USD
Free Shipping
$ 221.45 USD
Free Shipping

Packaged by Turner - Corporate Logo
T#:401619
Part#: 16116762417KT1
In Stock
Sale - Save 18% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD
Free Shipping
Sale - Save 18%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.97 USD
Free Shipping

The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.

This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.

Together they make this job simple and easy and ensure a tight fit with a new ring. 

Show More Show Less
Packaged by Turner - Corporate Logo
T#:5416764
Part#: 11377548388TMSKT
Ships in 4 Business Days
Sale - Save 19% $ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.20 USD
Free Shipping
Sale - Save 19%
$ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.20 USD
Free Shipping
Includes new Valvetronic motor, gasket, and hardware. The Valv-tronic adjuster unit changes the the timing shaft to adjust the valve timing.

Packaged by Turner - Corporate Logo
T#:582218
Part#: 83300493743
In Stock
$ 247.52 USD
Free Shipping
$ 247.52 USD
Free Shipping
BMW recommends valve adjustments every 30k miles on your S54-equipped BMW. We have all the parts you will need to do the job in one discounted package for your BMW E46 M3, Z3, or Z4! Kit includes: 11127832034 x 1 - Valve Cover Gasket 11127831271 x 6 - Spark Plug Hole Gasket 11121437395 x 2 - Valve Cover Seal Washer Grommet 11127830972 x 13 - Valve Cover Nut Grommet VSK4 Wiseco x 1 - Valve Shim Set 83300493743 x 1 - Valve Shim Tool *Click here for valve adjustment instructions* This item fits the following BMWs: 2001-2006 E46 BMW M3, M3 Convertible2001-2002 Z3 BMW M Roadster M Coupe2006-2008 Z4 BMW Z4 M Roadster M Coupe
Show More Show Less

Packaged by Turner - Corporate Logo
T#:15710784
Part#: 11137834886-KT
Ships in 1 Business Day
Sale - Save 8% $ 846.99

This product was last offered at the strikethrough price on
05-03-2026

$ 780.99 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 846.99

This product was last offered at the strikethrough price on
05-03-2026

$ 780.99 USD
Free Shipping on orders $49 and up
The S54 engine has a known history of rod bearing failure, and if your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing which can trash your crankshaft. WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. Kit includes Upper and lower WPC treated rod bearings for extra protection against wear Hardware Oil filter Castrol TWS Edge Professional Oil pan gasket Oil pan cover gasket RedLine assembly lube Connecting rod bolts
Show More Show Less
Packaged by Turner - Corporate Logo
T#:583532
Part#: S54PISKT
In Stock
Sale - Save 19% $ 291.99

This product was last offered at the strikethrough price on
05-03-2026

$ 237.09 USD
Free Shipping
Sale - Save 19%
$ 291.99

This product was last offered at the strikethrough price on
05-03-2026

$ 237.09 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Genuine BMW M Performance - Corporate Logo
T#:338599
Part#: TMS1778
Ships in 5 Business Days
Starting at $ 114.99 USD
Free Shipping
Starting at $ 114.99 USD
Free Shipping
This Genuine BMW manual shift knob fits all 1982 and on BMWs. It "snaps" onto your shifter level just as your stock shift knob does, and can be installed in a matter of seconds. This knob is much shorter and smaller than the "standard" knobs, and is weighted for better shifter feel. Available with your choice of either 5 speed or 6 speed shift pattern (select your option below).

This knob is right out of the BMW Performance catalog, BMW Performance Shifter installed and features supple black alcantara suede (with great grip!) and a weighted body. This knob was specifically designed and marketed for the E82 / E88 1 Series and the E90/E92 3 Series, BUT it also fits all manual transmission BMWs from 1982 through present. This means this great looking and great feeling shifter knob can be used on almost every BMW (except 1981 and earlier).

Note that many newer models have a 1-piece knob + boot. This is standard on most M cars and on all cars that have an illuminated shift knob. We sell new replacement boots to use with this shift knob, choose the option below if you would like one included with your order (not for E9X M3).
Show More Show Less


Packaged by Turner - Corporate Logo
T#:6181664
Part#: TWH9905003T
In Stock
Sale - Save 3% $ 141.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 137.73 USD
Free Shipping
Sale - Save 3%
$ 141.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 137.73 USD
Free Shipping
7.5MM (.30 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less
Packaged by Turner - Corporate Logo
T#:15677563
Part#: 31126760203-KT
In Stock
Sale - Save 23% $ 214.99

This product was last offered at the strikethrough price on
05-03-2026

$ 164.98 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 214.99

This product was last offered at the strikethrough price on
05-03-2026

$ 164.98 USD
Free Shipping on orders $49 and up
The wheel hub is a generally overlooked part of your vehicle, but they are crucial to optimum performance. The assembly links the wheel to the chassis and is equipped with metal wheel bearings that turn the wheel as the car moves along. Over time, these assemblies can become warn and in need of replacement. Yet, paying a professional to do the job will cost an arm and a leg, so why pay someone else to do it when you can in your own garage?
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5403232
Part#: 31226757024TMSKT
In Stock
Sale - Save 23% $ 255.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.13 USD
Free Shipping
Sale - Save 23%
$ 255.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.13 USD
Free Shipping
Includes left and right bearing, nuts, dust caps and Schwaben 46mm socket for ease of installation A failing wheel bearing may translate excessive vibration through the steering wheel, a noticeable hum while driving at speed, and a groan or clunking while turning. If you are experiencing any of these symptoms, your wheel bearing may be failing.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:41863696
Part#: 26122282495T1KT
Ships in 3 Business Days
Sale - Save 16% $ 378.99

This product was last offered at the strikethrough price on
04-17-2026

$ 316.50 USD
Free Shipping on orders $49 and up
Sale - Save 16%
$ 378.99

This product was last offered at the strikethrough price on
04-17-2026

$ 316.50 USD
Free Shipping on orders $49 and up
This kit has a quality aftermarket center mount, flex disk and required hardware for a fresh driveshaft overhaul!

Oil Pan Gasket Replacement Kit
For vehicles with automatic transmission only
Packaged by Turner - Corporate Logo
T#:5403285
Part#: 11137548031TMSKT
In Stock
Sale - Save 1% $ 194.99

This product was last offered at the strikethrough price on
02-16-2026

$ 192.19 USD
Free Shipping
Sale - Save 1%
$ 194.99

This product was last offered at the strikethrough price on
02-16-2026

$ 192.19 USD
Free Shipping
Includes new pan gasket, hardware and a oil service kit. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.
Packaged by Turner - Corporate Logo
T#:15744013
Part#: 11127831271-KT
Ships in 6 Business Days
Sale - Save 3% $ 105.96

This product was last offered at the strikethrough price on
05-03-2026

$ 103.01 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 105.96

This product was last offered at the strikethrough price on
05-03-2026

$ 103.01 USD
Free Shipping on orders $49 and up
When these gaskets leak you'll start to smell oil burning when the engine is hot. Also everything downward from the top of the engine becomes coated in a greasy film. The valve cover gasket keeps all of the motor oil inside your engine. Your valve train and lifters get soaked with oil to keep everything lubricated. If the valve cover fails, engine oil seeps and leaks out, running down and burning on the block or cylinder head. Replace it and keep your engine compartment clean and tidy with all the engine oil in the motor. If you are removing your S54 valve cover for valve adjustment, inspection or repairs, you can now get all the gaskets you need in one box. Included are Valve cover gasket Spark plug seals Nut seals Grommets Copper sealing washers
Show More Show Less

Packaged by Turner - Corporate Logo
T#:15710818
Part#: 11127514540KT
Ships on Sep 30, 2026
Sale - Save 2% $ 2,332.99

This product was last offered at the strikethrough price on
06-10-2026

$ 2,277.27 USD
Sale - Save 2%
$ 2,332.99

This product was last offered at the strikethrough price on
06-10-2026

$ 2,277.27 USD
When duty calls and its time to replace or refresh your cylinder head, you'll need quite a few components. Look no further because we've collected all those parts into one kit including notable items like 7 liters of BMW oil, 1 gallon of coolant, all seals and gaskets needed and required hardware all available in one kit at the push of a button!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:36811826
Part#: 11137834886JRKT
Ships in 1 Business Day
Sale - Save 8% $ 730.99

This product was last offered at the strikethrough price on
05-03-2026

$ 673.05 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 730.99

This product was last offered at the strikethrough price on
05-03-2026

$ 673.05 USD
Free Shipping on orders $49 and up

Packaged by Turner - Corporate Logo
T#:582865
Part#: T31122343352KT
In Stock
Sale - Save 27% $ 570.99

This product was last offered at the strikethrough price on
05-01-2026

$ 414.44 USD
Free Shipping
Sale - Save 27%
$ 570.99

This product was last offered at the strikethrough price on
05-01-2026

$ 414.44 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms
Front Control Arm Bushings

Show More Show Less

Premium Differential Service Kit - E46 M3, E9X M3, E82 1 M Coupe ...
Includes BMW SAF-XJ limited slip differential fluid with FM booster
Packaged by Turner - Corporate Logo
T#:598688
Part#: E46M3DIFSERTMSKT
In Stock
Sale - Save 8% $ 301.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.83 USD
Free Shipping
Sale - Save 8%
$ 301.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.83 USD
Free Shipping
Servicing your differential is an important job and should only be completed using high quality components! To ensure our customers are getting exactly what they need, we have put together this limited-slip differential service kit that includes all new fluid from BMW, a new BMW drain plug, and one of our new Titanium Magnetic Differential Drain Plugs!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:401625
Part#: 11111318185KT
In Stock
Sale - Save 2% $ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping
Sale - Save 2%
$ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

Show More Show Less
Packaged by Turner - Corporate Logo
T#:211239
Part#: 11127830972-395
In Stock
Sale - Save 14% $ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.74 USD
Free Shipping on orders $49 and up
Sale - Save 14%
$ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.74 USD
Free Shipping on orders $49 and up
Valve Cover Seal Washer. Seals the valve cover bolt to the cam cover. Not required when changing valve cover gasket but good to have as spares. They often get hard and shrink over time, leading to an oil leak or vacuum leak. We sell this as a complete set of 15 grommets with both part numbers included (11127830972 and 11121437395). Individual seals available separately (see below).

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less


Packaged by Turner - Corporate Logo
T#:6181661
Part#: TWH9905013T
In Stock
Sale - Save 25% $ 170.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 128.24 USD
Free Shipping
Sale - Save 25%
$ 170.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 128.24 USD
Free Shipping
With these kit options you have the ability to transform the appearance and stance of your BMW. Get the wheels dialed in for a better look and wider track width! With optional stud conversion you will be able to change wheels quickly and with ease. Look no further for an affordable way to transform your vehicle! 15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser-engraved size and part number for easy identification stealthy anthracite or black color Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Stud Conversion: Easy install with allen socket. Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. For safety retorque hardware after 25-50 miles. These studs may be used with spacers up to 15mm. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555742
Part#: PBTSRKT32
In Stock
Sale - Save 13% $ 272.99

This product was last offered at the strikethrough price on
05-03-2026

$ 237.64 USD
Free Shipping
Sale - Save 13%
$ 272.99

This product was last offered at the strikethrough price on
05-03-2026

$ 237.64 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:401683
Part#: 65816905133KT2
In Stock
Sale - Save 23% $ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 74.70 USD
Free Shipping
Sale - Save 23%
$ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 74.70 USD
Free Shipping

The external temperature sensor on a BMW is placed within the underbody plastics that extend very close to the road. As a result it's easy to damage by rolling into a low curb or parking lot tire stop. The first sign you may have a problem with your external temperature sensor is if you have a really low reading. This is caused by the sensor either being damaged, missing or having an open circuit; the wires leading to the sensor may have torn off in an impact.

 

Includes solder filled heat shrink connectors, contact leads with wire, plug housing, temperature sensor, 10 pack of zip ties, and a panel mount zip tie for mounting the sensor.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:5416757
Part#: 33521092362TMSKT
Ships on Jan 15, 2027
Sale - Save 11% $ 115.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.68 USD
Free Shipping
Sale - Save 11%
$ 115.99

This product was last offered at the strikethrough price on
05-03-2026

$ 102.68 USD
Free Shipping
Complete rear upper shock mounting kit includes everything you need to replace old, hardened mounts with new heavy duty replacements. Body seals, hardware, and reinforcement plates are included. Kit includes: Heavy-duty, German-made Lemfoerder rear shock mounts from the E46 M3 Elring shock mount gaskets Heavy-duty rear shock mount reinforcement plates Locking nuts Select your vehicle for additional fitment information. **Note** Upper damper nuts vary in size from shock to shock. If you wish to replace them please measure your damper and source accordingly.
Show More Show Less

Eccentric Shaft Sensor Kit
For vehicles with production date up to 10/2006
Packaged by Turner - Corporate Logo
T#:5416787
Part#: 11377524879TMSKT
In Stock
Sale - Save 18% $ 270.99

This product was last offered at the strikethrough price on
05-03-2026

$ 221.57 USD
Free Shipping
Sale - Save 18%
$ 270.99

This product was last offered at the strikethrough price on
05-03-2026

$ 221.57 USD
Free Shipping
Includes a new sensor as well as valve cover and eccentric gaskets for a complete service. The eccentric shaft sensor is known to fail and can be a costly repair at the dealer. Often caused by oil getting into the connection for the wiring harness and damaging the sensor and causing a check engine light. With this kit you get the the sensor along with new valve cover and eccentric shaft adjuster gaskets to ensure a complete leak free job.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:15677508
Part#: 11127581215-KT
In Stock
Sale - Save 18% $ 270.16

This product was last offered at the strikethrough price on
05-03-2026

$ 221.57 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 270.16

This product was last offered at the strikethrough price on
05-03-2026

$ 221.57 USD
Free Shipping on orders $49 and up
The eccentric shaft sensor is known to fail and can be a costly repair at the dealer. Often caused by oil getting into the connection for the wiring harness and damaging the sensor and causing a check engine light. With this kit you get the the sensor along with new valve cover and eccentric shaft adjuster gaskets to ensure a complete leak free job.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:556738
Part#: N52TISKT
In Stock
Sale - Save 8% $ 286.99

This product was last offered at the strikethrough price on
02-26-2026

$ 265.24 USD
Free Shipping
Sale - Save 8%
$ 286.99

This product was last offered at the strikethrough price on
02-26-2026

$ 265.24 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555780
Part#: PBTSRKT69
In Stock
Sale - Save 13% $ 248.99

This product was last offered at the strikethrough price on
05-03-2026

$ 217.86 USD
Free Shipping
Sale - Save 13%
$ 248.99

This product was last offered at the strikethrough price on
05-03-2026

$ 217.86 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:554529
Part#: N5XATSKT
In Stock
Sale - Save 4% $ 217.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.08 USD
Free Shipping
Sale - Save 4%
$ 217.99

This product was last offered at the strikethrough price on
05-03-2026

$ 209.08 USD
Free Shipping

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. 

Kit Includes:

  • Automatic transmission oil pan with integrated filter 
  • Oil pan gasket
  • Drain plug with sealing washer
  • Fill plug with sealing washer
  • 7 quarts Redline D4 automatic transmission fluid

Fits the following BMWs:
E84 BMW
X1 xDrive35i
E90 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission), 330i/xi, 335i/xi
E91 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission)
E92 BMW 328i/xi (with GA6HP19Z automatic transmission), 335i/x
E93 BMW 328i (with GA6HP19Z automatic transmission),  335i
E60 BMW 525i/xi, 528i/xi, 530i/xi, 535i/xi
E61 BMW 525i, 530xi, 535xi
E70 BMW X5 xDrive30i
E71 BMW X6 35iX
E82/88 BMW 128i(with GA6HP19Z automatic transmission), 135i (N54)
F01/02 BMW 740i/Li
E85/86/89 BMW Z4 3.0i/Si sDrive30i M54 N52

Show More Show Less

Packaged by Turner - Corporate Logo
T#:555752
Part#: PBTSRKT41
In Stock
Sale - Save 8% $ 266.99

This product was last offered at the strikethrough price on
05-03-2026

$ 245.94 USD
Free Shipping
Sale - Save 8%
$ 266.99

This product was last offered at the strikethrough price on
05-03-2026

$ 245.94 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:6181670
Part#: TWH9905020T
In Stock
Sale - Save 42% $ 155.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 90.50 USD
Free Shipping
Sale - Save 42%
$ 155.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 90.50 USD
Free Shipping
20MM (.79 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less
Packaged by Turner - Corporate Logo
T#:339100
Part#: TMS224320
In Stock at Vendor
Starting at $ 514.24 USD
Free Shipping
Starting at $ 514.24 USD
Free Shipping
This is a customizable cooling system overhaul kit, which starts off with the basic radiator and water pump and can be configured to replace all the M54 common cooling system failure parts in one package. This cooling system package is for the 2003-2005 Z4 Roadster.

The Z4 cooling system is much like that of the sister 3 series. Several of the primary cooling components are prone to failure within 60k miles (or less in many cases). A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the radiator & waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your cooling system. Available with our kit is an OEM Behr radiator, an Original BMW water pump (with updated composite impeller), thermostat (complete with housing), radiator cap, new hoses, and other essential cooling parts.

Optional items (which can be added below):
  • Radiator cap
  • Major cooling hoses
  • Original BMW antifreeze
  • Upgrade the water pump to a Stewart EMP High Performance pump
  • Add a new coolant expansion tank (known for cracking)
  • Include a new coolant level sensor (known for failing / throwing "check coolant" messages)
  • Include a new coolant temp sensor (located in the lower radiator hose) (re-using the old sensor and seal may lead to a leak)
  • Add a new thermostat for an automatic transmission (located with the expansion tank).
    This cooling system overhaul kit fits the following BMWs:
    2003-2005 E85 BMW Z4 2.5i Z4 3.0i

    Please put a check in the boxes next to the items you wish to order.
  • Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:30960455
    Part#: TMSZ4MMTSKT1
    In Stock
    Sale - Save 20% $ 90.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 73.18 USD
    Free Shipping on orders $49 and up
    Sale - Save 20%
    $ 90.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 73.18 USD
    Free Shipping on orders $49 and up
    The oil in your manual transmission is extremely vital to the life of your transmission. Over time it will begin to break down, lose viscosity, and begin to allow excess heat and friction. This kit is the perfect remedy to this problem. Included are 2 Liters of Liqui-Moly Top Tec 5100 Manual Transmission Fluid, a URO fill plug, and an ECS Magnetic Drain Plug.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:555701
    Part#: PBTSRKT9
    In Stock
    Sale - Save 13% $ 272.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 237.64 USD
    Free Shipping
    Sale - Save 13%
    $ 272.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 237.64 USD
    Free Shipping

    Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

    This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

    See the included components under Kit Contents below.

    Show More Show Less