BMW Engine Parts for BMW Z Series E85/6 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:23714967
Part#: NSERIESIGNCOILKT
In Stock
$ 205.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.
Show More Show Less
King - Corporate Logo
T#:598331
Part#: CR222SV
In Stock
$ 52.00 USD
Free Shipping on orders $49 and up
Introducing King Connecting Rod Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. King Rod Bearings for BMW Engines come in sets of 2 (2 Upper and 2 Lower Bearing Shells) Suitable for 2 Con-Rods. The Upper and Lower bearing shells are comprised of a lead-free, Silver-based tri-metal material designed for extreme load applications. Engineered with meticulous attention to detail, King bearings are designed to exact standards to ensure optimal fitment and compatibility with BMW engines. Experience improved smoother engine operation with King Bearings.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:42099850
Part#: 11142247867TKT
In Stock
$ 45.99 USD
Free Shipping on orders $49 and up
Protect your BMW engine and drivetrain with the OE Rear Main/Crankshaft Seal Kit, a critical upgrade for leak-free performance and longevity.

King - Corporate Logo
T#:597151
Part#: CR222SV0.25
In Stock
$ 52.00 USD
Free Shipping on orders $49 and up

BMW N20 N52 N54 N55 Connecting Rod Bearing Set of 2 Pairs - 0.25mm Oversized provides an exceptional upgrade for enhancing engine performance and reliability. Crafted by King, these bearings are engineered to withstand the rigorous demands of high-performance driving.

  • Premium Quality Construction: Made from lead-free, silver-based tri-metal material, offering superior durability and load-bearing capabilities.
  • 0.25mm Oversized Design: Features an oversized specification to accommodate slight engine wear and ensure a precise fit for optimal performance.
  • Enhanced Engine Stability: Provides exceptional support and stability to the connecting rods, reducing wear and extending engine life.
  • Precision Engineering: Designed to meet exacting standards, ensuring perfect compatibility with BMW N20, N52, N54, and N55 engines.
  • Improved Engine Operation: Delivers smoother and more efficient engine performance, enhancing the overall driving experience.

Turner Motorsport's BMW N20 N52 N54 N55 Connecting Rod Bearing Set of 2 Pairs - 0.25mm Oversized is ideal for those seeking high-quality components to boost engine reliability and performance.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:15677580
Part#: 11427540759-KT
In Stock
Sale - Save 1% $ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD
Free Shipping on orders $49 and up
This kit includes: 1 Oil Filter Housing Gasket (11428637821) 1 M8x28 bolt (11427540759) 1 M8x43 bolt (11427540763) 1 M8x78 bolt (11427540758) 1 Oil Pressure Sensor (12617568480)
Packaged by Turner - Corporate Logo
T#:25805743
Part#: 11367585425TKT
In Stock
Sale - Save 25% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.
Show More Show Less

High-Performance Ignition Service Kit - BMW N52 3.0L
For vehicles with production date from 04/2006
Packaged by Turner - Corporate Logo
T#:583536
Part#: N52PISKT
In Stock
Sale - Save 20% $ 243.99

This product was last offered at the strikethrough price on
05-03-2026

$ 194.75 USD
Free Shipping
Sale - Save 20%
$ 243.99

This product was last offered at the strikethrough price on
05-03-2026

$ 194.75 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Oil Pan Gasket - With Bolts
Bolts Are For Vehicles With Automatic Transmission ONLY
Packaged by Turner - Corporate Logo
T#:5403247
Part#: 11132210959TMSKT
In Stock
Sale - Save 3% $ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD
Free Shipping
Sale - Save 3%
$ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD
Free Shipping
Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Packaged by Turner - Corporate Logo
T#:401664
Part#: VSK4KT2
In Stock
$ 143.84 USD
Free Shipping
$ 143.84 USD
Free Shipping

Proper valve lash adjustment is critical for longevity and performance. If your S54 is due for valve adjustment maintenance you can do it yourself with this kit, saving hundreds of dollars in labor charges. 

Includes

  • Shim set 
  • Installation tool #83300493743
  • 16 Blade Feeler gauge set 

BMW recommends S54 valve inspection and adjustment every 30k miles.

*Click here for valve adjustment instructions*

Show More Show Less

Kolbenschmidt - Corporate Logo
T#:341713
Part#: 11241284849
In Stock
$ 77.11

This product was last offered at the strikethrough price on
02-20-2026

$ 67.99 USD
Free Shipping on orders $49 and up
$ 67.99 USD
Free Shipping on orders $49 and up
Standard bore - 45mm Set of 8 connecting rod bearings for 4 cylinders/connecting rods. 6cyl, V8, & V12 engines will require additional sets to overhaul all connecting rod bearings.
Packaged by Turner - Corporate Logo
T#:392550
Part#: S54RBPDK
In Stock
Starting at $ 455.97 USD
Free Shipping
Starting at $ 455.97 USD
Free Shipping
Replacing the rod bearings requires mechanical knowledge and skill, a clean workspace, and several specialist tools. Our preferred procedure is to leave the engine in the car but remove the front subframe. The engine must be supported from above with an engine brace. Removing the front subframe involves disconnecting the control arms and steering rack and steering column. The oil pan can then be removed and you can access the connecting rods and bearings. Replacing the rod bearings themselves is straightforward but patience and forethought will be extremely helpful. In addition to analyzing the severity of the rod bearing wear, the crankshaft must also be inspected closely for damage. Rod bearings that have been severely worn may have damaged the crankshaft (requiring replacement or machining).
Show More Show Less
King - Corporate Logo
T#:599337
Part#: MB7776SI
In Stock
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.
Show More Show Less


Packaged by Turner - Corporate Logo
T#:5512212
Part#: 11311703717KT
In Stock
Sale - Save 33% $ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Sale - Save 33%
$ 109.99

This product was last offered at the strikethrough price on
05-28-2026

$ 74.22 USD
Free Shipping
Timing Chain Kit for the BMW M50/M52/M54 engines composed of quality parts by Bremmen Parts! Kit Contents: Lower Timing Chain Tensioner Timing Chain - Lower Lower Timing Chain Guide Rail Tensioner Piston
Show More Show Less
Kolbenschmidt - Corporate Logo
T#:12919
Part#: 11211706847
In Stock
$ 110.29 USD
Free Shipping
$ 110.29 USD
Free Shipping
These are the "Yellow" main bearing shells for many BMW 4 and 6 cylinder engines. The size is 60.00mm. Set includes bearings for 6 cylinder cars. 4 cylinder cars get 2 spare bearing sets.

KS Kolbenshmidt designs and produces internal parts for gasoline and diesel engines and is an OEM choice for many automakers. Both increased power handling and reduced fuel consumption are the motivating factors behind this company and they continue to innovate every day.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1989-1990 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2000-2006 E53 BMW X5 3.0i
2004-2006 E83 BMW X3 2.5i X3 3.0i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2006 E85 BMW Z4 2.5i Z4 3.0i - M54
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Packaged by Turner - Corporate Logo
T#:557341
Part#: 11111318185TMSKT
In Stock
Sale - Save 2% $ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping
Sale - Save 2%
$ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

Show More Show Less

King - Corporate Logo
T#:3929159
Part#: CR222SV0.5
In Stock at Vendor
$ 52.00

This product was last offered at the strikethrough price on
05-03-2026

$ 48.99 USD
Free Shipping on orders $49 and up
$ 48.99 USD
Free Shipping on orders $49 and up

BMW N20 N52 N54 N55 S55 Connecting Rod Bearing Set of 2 Pairs - 0.50mm Oversized is designed to elevate your engine’s performance and reliability. Developed with high-performance driving in mind, this connecting rod bearing set from Turner Motorsport offers superior durability and support. Each set includes 2 upper and 2 lower bearing shells, crafted from a lead-free, silver-based tri-metal material that is specifically engineered for extreme load applications. These bearings are meticulously designed to meet exact standards, ensuring optimal fitment and compatibility with your BMW engine, resulting in smoother and more reliable operation.

  • Enhanced Engine Performance: Provides superior support and stability for high-performance driving.
  • Durable Construction: Lead-free, silver-based tri-metal material designed for extreme loads.
  • Precise Fitment: Engineered to exact standards for compatibility with BMW N20, N52, N54, N55, and S55 engines.
  • Improved Reliability: Ensures smoother engine operation and reduced wear over time.
  • Complete Set: Includes 2 upper and 2 lower bearing shells for 2 connecting rods.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:582210
Part#: S54WVALVESHIMKT
Ships in 1-2 days
$ 222.04

This product was last offered at the strikethrough price on
05-03-2026

$ 221.45 USD
Free Shipping
$ 221.45 USD
Free Shipping
King - Corporate Logo
T#:597154
Part#: MB7776SI0.25
In Stock
$ 118.99 USD
Free Shipping
$ 118.99 USD
Free Shipping
Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:5416764
Part#: 11377548388TMSKT
Ships in 6 Business Days
Sale - Save 19% $ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.20 USD
Free Shipping
Sale - Save 19%
$ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.20 USD
Free Shipping
Includes new Valvetronic motor, gasket, and hardware. The Valv-tronic adjuster unit changes the the timing shaft to adjust the valve timing.

Packaged by Turner - Corporate Logo
T#:582218
Part#: 83300493743
In Stock
$ 247.52 USD
Free Shipping
$ 247.52 USD
Free Shipping
BMW recommends valve adjustments every 30k miles on your S54-equipped BMW. We have all the parts you will need to do the job in one discounted package for your BMW E46 M3, Z3, or Z4! Kit includes: 11127832034 x 1 - Valve Cover Gasket 11127831271 x 6 - Spark Plug Hole Gasket 11121437395 x 2 - Valve Cover Seal Washer Grommet 11127830972 x 13 - Valve Cover Nut Grommet VSK4 Wiseco x 1 - Valve Shim Set 83300493743 x 1 - Valve Shim Tool *Click here for valve adjustment instructions* This item fits the following BMWs: 2001-2006 E46 BMW M3, M3 Convertible2001-2002 Z3 BMW M Roadster M Coupe2006-2008 Z4 BMW Z4 M Roadster M Coupe
Show More Show Less

Packaged by Turner - Corporate Logo
T#:15710784
Part#: 11137834886-KT
In Stock at Vendor
Sale - Save 8% $ 846.99

This product was last offered at the strikethrough price on
05-03-2026

$ 780.99 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 846.99

This product was last offered at the strikethrough price on
05-03-2026

$ 780.99 USD
Free Shipping on orders $49 and up
The S54 engine has a known history of rod bearing failure, and if your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing which can trash your crankshaft. WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. Kit includes Upper and lower WPC treated rod bearings for extra protection against wear Hardware Oil filter Castrol TWS Edge Professional Oil pan gasket Oil pan cover gasket RedLine assembly lube Connecting rod bolts
Show More Show Less
Packaged by Turner - Corporate Logo
T#:583532
Part#: S54PISKT
In Stock
Sale - Save 19% $ 291.99

This product was last offered at the strikethrough price on
05-03-2026

$ 237.09 USD
Free Shipping
Sale - Save 19%
$ 291.99

This product was last offered at the strikethrough price on
05-03-2026

$ 237.09 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
King - Corporate Logo
T#:4840521
Part#: CR222SV0.75
In Stock
$ 33.99

This product was last offered at the strikethrough price on
03-20-2026

$ 32.79 USD
Free Shipping on orders $49 and up
$ 32.79 USD
Free Shipping on orders $49 and up
Introducing King Connecting Rod Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. King Rod Bearings for BMW Engines come in sets of 2 (2 Upper and 2 Lower Bearing Shells) Suitable for 2 Con-Rods. The Upper and Lower bearing shells are comprised of a lead-free, Silver-based tri-metal material designed for extreme load applications. Engineered with meticulous attention to detail, King bearings are designed to exact standards to ensure optimal fitment and compatibility with BMW engines. Experience improved smoother engine operation with King Bearings.
Show More Show Less


Packaged by Turner - Corporate Logo
T#:180875
Part#: TMS180875
In Stock
$ 142.24

This product was last offered at the strikethrough price on
05-07-2026

$ 107.33 USD
Free Shipping
$ 107.33 USD
Free Shipping
Not only will this kit stop most E90 oil leaks, it's the perfect addition for ignition coil or spark plug replacement! Oil leaks - and the damage they can cause - seem to be the worst annoyances on these cars. The biggest source of an oil leak is from the valve cover, followed by the oil filter housing, Valvetronic seal, camshaft seals, and the eccentric shaft sensor seal. Once the oil leaks, and if ignored for an extended time, the oil will contaminate vital electrical sensors. This is especially the case with ignition coils and also the eccentric shaft sensor on the Valvetronic shaft at the top of the cylinder head. During any ignition coil and spark plug replacement take a close look inside for any oil pooling at the bottom. We have been seeing valve cover oil leaks as soon as 40,000 miles. We look for oil leaks on every E90 that comes into our shop.

We have put together this package of valve cover gaskets and other related gaskets and seals for you to fully overhaul the N52 valve cover and put a stop to those pesky oil leaks. This package has the replacement parts for N52 engines built from the 2007 model year and includes:

  • 11127582245 - N52 valve cover gasket set
  • 11127552280 - N52 eccentric shaft sensor seal
  • 11127559699 - N52 Valvetronic gasket

2007 and later N51/N52 engines do not need replacement valve cover bolts, unless the bolts are actually broken off or missing. Unlike the 2006 aluminum hardware, the later parts are steel and not 1-time use.

These are all OEM or OE parts. Replacement of these gaskets and seals is straight-forward but a long process. BMW dealers typically charge for over eight hours of labor. If you have replaced spark plugs before you should be capable of this repair. In addition, there are several other parts to replace while you're in the vicinity: camshaft sensor o-rings, oil filter housing profile gasket, VAN0S solenoids, and the eccentric shaft sensor. These other parts, except the eccentric shaft sensor (see below), are replaceable without removing the valve cover but are more easily accessed during the valve cover work.

Eccentric Shaft Sensor: This is the position sensor that relays the eccentric shaft's position back to the DME. It's located at the front of the engine and is only accessible with the valve cover off . The seal around the sensor can fail and allow oil to blow out from under the cam cover. Oil can then leak into the sensor itself and cause it to fail. Without a functioning sensor your E90 can experience poor running, hesitation, poor performance, jerky shifts, and sluggish response. It's easy to check and see if oil has accumulated inside the sensor: unbolt the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside or even around the sensor itself, plan on replacing this sensor during your next ignition coil, spark plug, and/or valve cover gasket work.

This valve cover kit fits the following BMWs:
2008-2012 E82 BMW 128i
2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E60 BMW 528i 528xi 528i xDrive
2011 F10 BMW 528i
2007-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
10/2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i
Show More Show Less
King - Corporate Logo
T#:4840520
Part#: CR6640XP
In Stock at Vendor
$ 163.99

This product was last offered at the strikethrough price on
05-22-2026

$ 148.99 USD
Free Shipping
$ 148.99 USD
Free Shipping
These King Performance Series bearings are recommended for performance applications. These bearings are designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE or upgraded crankshafts. These King Performance Series bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. The bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow.
Show More Show Less
King - Corporate Logo
T#:25706094
Part#: CR222GPC
In Stock
$ 96.99 USD
Free Shipping on orders $49 and up
$ 96.99 USD
Free Shipping on orders $49 and up
King's Racing Line of Performance Engine Bearings are for enthusiasts looking for an upgraded, coated connecting rod bearing to replace their OE bearings with. Constructed of a Silver base, these bearings are coated in a polymer-based coating to create a thermal barrier between your connecting rods and crankshaft. This kit includes a full set of bearing shells!
Show More Show Less


Oil Pan Gasket Replacement Kit
For vehicles with automatic transmission only
Packaged by Turner - Corporate Logo
T#:5403285
Part#: 11137548031TMSKT
In Stock
Sale - Save 1% $ 194.99

This product was last offered at the strikethrough price on
02-16-2026

$ 192.19 USD
Free Shipping
Sale - Save 1%
$ 194.99

This product was last offered at the strikethrough price on
02-16-2026

$ 192.19 USD
Free Shipping
Includes new pan gasket, hardware and a oil service kit. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.
Packaged by Turner - Corporate Logo
T#:15744013
Part#: 11127831271-KT
Ships in 1-2 days
Sale - Save 3% $ 105.96

This product was last offered at the strikethrough price on
05-03-2026

$ 103.01 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 105.96

This product was last offered at the strikethrough price on
05-03-2026

$ 103.01 USD
Free Shipping on orders $49 and up
When these gaskets leak you'll start to smell oil burning when the engine is hot. Also everything downward from the top of the engine becomes coated in a greasy film. The valve cover gasket keeps all of the motor oil inside your engine. Your valve train and lifters get soaked with oil to keep everything lubricated. If the valve cover fails, engine oil seeps and leaks out, running down and burning on the block or cylinder head. Replace it and keep your engine compartment clean and tidy with all the engine oil in the motor. If you are removing your S54 valve cover for valve adjustment, inspection or repairs, you can now get all the gaskets you need in one box. Included are Valve cover gasket Spark plug seals Nut seals Grommets Copper sealing washers
Show More Show Less

Packaged by Turner - Corporate Logo
T#:15710818
Part#: 11127514540KT
Ships on Sep 29, 2026
Sale - Save 2% $ 2,332.99

This product was last offered at the strikethrough price on
06-10-2026

$ 2,277.27 USD
Sale - Save 2%
$ 2,332.99

This product was last offered at the strikethrough price on
06-10-2026

$ 2,277.27 USD
When duty calls and its time to replace or refresh your cylinder head, you'll need quite a few components. Look no further because we've collected all those parts into one kit including notable items like 7 liters of BMW oil, 1 gallon of coolant, all seals and gaskets needed and required hardware all available in one kit at the push of a button!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:36811826
Part#: 11137834886JRKT
In Stock at Vendor
Sale - Save 8% $ 730.99

This product was last offered at the strikethrough price on
05-03-2026

$ 673.05 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 730.99

This product was last offered at the strikethrough price on
05-03-2026

$ 673.05 USD
Free Shipping on orders $49 and up

Packaged by Turner - Corporate Logo
T#:6196924
Part#: 12131712219TKT
In Stock
$ 302.99 USD
Free Shipping
$ 302.99 USD
Free Shipping
Restore your ignition system using high quality Bosch ignition coils and NGK spark plugs. Your ignition system will start to fail with age, which will ruin your fuel economy as well as your performance. This Turner Motorsport kit includes new coils, plugs, and hardware. This particular kit utilizes all quality aftermarket components.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:30497158
Part#: 12131712219OEMKT
In Stock
$ 253.99 USD
Free Shipping on orders $49 and up
Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug. To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OEM quality components, replacing any potential fault points in your ignition system for peak performance!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:401625
Part#: 11111318185KT
In Stock
Sale - Save 2% $ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping
Sale - Save 2%
$ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD
Free Shipping

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

Show More Show Less
King - Corporate Logo
T#:25706102
Part#: CR222GPC026
In Stock
$ 101.99 USD
Free Shipping on orders $49 and up
$ 101.99 USD
Free Shipping on orders $49 and up
King's Racing Line of Performance Engine Bearings are for enthusiasts looking for an upgraded, coated connecting rod bearing to replace their OE bearings with. Constructed of a Silver base, these bearings are coated in a polymer-based coating to create a thermal barrier between your connecting rods and crankshaft. Set of 4 Bearing Shells - .026 Oversize
Show More Show Less


Packaged by Turner - Corporate Logo
T#:338260
Part#: 12147518628HK
In Stock
Starting at $ 79.98 USD
Free Shipping
Starting at $ 79.98 USD
Free Shipping
This is the exhaust cam position sensor for cars with M52, M54, N62 engines. Choose either Genuine BMW or Hella brand. Hella manufactures the highest quality parts and is an OEM supplier to BMW. Includes BMW part numbers 12147518628 and 12141748398. Replaces BMW part number 12141438082.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1999-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i 545i
2004-2005 E63 BMW 645ci
2002-2005 E65 BMW 745i 745li
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
2004-2006 E53 BMW X5 4.4i 4.8i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2006 E85 BMW Z4 2.5i Z4 3.0i
Show More Show Less
Packaged by Turner - Corporate Logo
T#:211239
Part#: 11127830972-395
In Stock
Sale - Save 14% $ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.74 USD
Free Shipping on orders $49 and up
Sale - Save 14%
$ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.74 USD
Free Shipping on orders $49 and up
Valve Cover Seal Washer. Seals the valve cover bolt to the cam cover. Not required when changing valve cover gasket but good to have as spares. They often get hard and shrink over time, leading to an oil leak or vacuum leak. We sell this as a complete set of 15 grommets with both part numbers included (11127830972 and 11121437395). Individual seals available separately (see below).

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Packaged by Turner - Corporate Logo
T#:599963
Part#: 1131783634KT1
In Stock
Sale - Save 3% $ 307.99

This product was last offered at the strikethrough price on
06-15-2026

$ 298.02 USD
Free Shipping
Sale - Save 3%
$ 307.99

This product was last offered at the strikethrough price on
06-15-2026

$ 298.02 USD
Free Shipping
Includes needed gaskets and hardware for installing a new camshaft set.

Ignition Service Kit - E9x, E82, E88, E70, E83
For vehicles with production date from 04/2006
Packaged by Turner - Corporate Logo
T#:41425001
Part#: 12138616153T1KT
In Stock
$ 282.99

This product was last offered at the strikethrough price on
02-26-2026

$ 269.99 USD
Free Shipping on orders $49 and up
$ 269.99 USD
Free Shipping on orders $49 and up
Comes with coil packs, dialectic grease and spark plugs for an all inclusive kit for servicing your BMW!

King - Corporate Logo
T#:25706104
Part#: MB7776SI0.5
In Stock
$ 118.99

This product was last offered at the strikethrough price on
05-03-2026

$ 94.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 118.99

This product was last offered at the strikethrough price on
05-03-2026

$ 94.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.
Show More Show Less
Eccentric Shaft Sensor Kit
For vehicles with production date up to 10/2006
Packaged by Turner - Corporate Logo
T#:5416787
Part#: 11377524879TMSKT
In Stock
Sale - Save 18% $ 270.99

This product was last offered at the strikethrough price on
05-03-2026

$ 221.57 USD
Free Shipping
Sale - Save 18%
$ 270.99

This product was last offered at the strikethrough price on
05-03-2026

$ 221.57 USD
Free Shipping
Includes a new sensor as well as valve cover and eccentric gaskets for a complete service. The eccentric shaft sensor is known to fail and can be a costly repair at the dealer. Often caused by oil getting into the connection for the wiring harness and damaging the sensor and causing a check engine light. With this kit you get the the sensor along with new valve cover and eccentric shaft adjuster gaskets to ensure a complete leak free job.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:15677508
Part#: 11127581215-KT
In Stock
Sale - Save 18% $ 270.16

This product was last offered at the strikethrough price on
05-03-2026

$ 221.57 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 270.16

This product was last offered at the strikethrough price on
05-03-2026

$ 221.57 USD
Free Shipping on orders $49 and up
The eccentric shaft sensor is known to fail and can be a costly repair at the dealer. Often caused by oil getting into the connection for the wiring harness and damaging the sensor and causing a check engine light. With this kit you get the the sensor along with new valve cover and eccentric shaft adjuster gaskets to ensure a complete leak free job.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:640351
Part#: 11317584084KT3
Ships in 2 Business Days
Sale - Save 20% $ 595.99

This product was last offered at the strikethrough price on
05-03-2026

$ 475.47 USD
Free Shipping
Sale - Save 20%
$ 595.99

This product was last offered at the strikethrough price on
05-03-2026

$ 475.47 USD
Free Shipping
Timing chains can cause catastrophic problems with your N52 engine if it doesn't function properly. Common symptoms of failure include excessive vibration or “slap” from the timing chain, and the possibility of plastic particles throughout the oil. Symptoms typically begin to surface between 80,000 and 100,000 miles. If left untouched, the issue can compound itself so far as to allow the timing chain to jump out of time, leaving you with a potentially damaged head and larger repair costs. This kit has been assembled using genuine BMW and high quality aftermarket components. From new timing chain guides, to a replacement oil pan drain plug, this kit has you covered to assure that all the needed parts are on hand and ready to install.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:556738
Part#: N52TISKT
In Stock
Sale - Save 8% $ 286.99

This product was last offered at the strikethrough price on
02-26-2026

$ 265.24 USD
Free Shipping
Sale - Save 8%
$ 286.99

This product was last offered at the strikethrough price on
02-26-2026

$ 265.24 USD
Free Shipping

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

King - Corporate Logo
T#:16707423
Part#: CR6877XP
In Stock at Vendor
$ 300.99 USD
Free Shipping on orders $49 and up
King's Racing Line of Performance Engine Bearings are for enthusiasts looking for an upgraded, coated connecting rod bearing to replace their OE bearings with. Constructed of a Silver base, these bearings are coated in a polymer-based coating to create a thermal barrier between your connecting rods and crankshaft. Complete Set of Bearing Shells
Show More Show Less
Packaged by Turner - Corporate Logo
T#:401675
Part#: S54VADJKT1
In Stock
Sale - Save 2% $ 405.61

This product was last offered at the strikethrough price on
05-03-2026

$ 398.29 USD
Free Shipping
Sale - Save 2%
$ 405.61

This product was last offered at the strikethrough price on
05-03-2026

$ 398.29 USD
Free Shipping

BMW recommends valve adjustment every 30,000 miles on the S54 engine.This valve adjustment kit includes every thing needed to to a proper valve adjustment on the S54 engine. 

Kit includes

  • Wiseco valve shims
  • Elring valve cover gasket set
  • BMW Valve shim Installation tool
  • Valve shim feeler gauge set 
  • Castrol TWS Edge Professional Engine Oil - 6 Quarts
  • Mann Oil Filter Kit
  • Oil pan drain plug 

Please note the the included feeler gauge set allows you to stack feeler blades to get a more precise adjustment 

*Click here for valve adjustment instructions*

This item fits the following BMWs: 
2001-2006 E46 BMW M3, M3 Convertible 
2001-2002 Z3 BMW M Roadster M Coupe 
2006-2008 Z4 BMW Z4 M Roadster M Coupe 

Show More Show Less
Packaged by Turner - Corporate Logo
T#:5675
Part#: S54VALVESHIMKIT
Ships in 10 Business Days
$ 1,230.83 USD
Free Shipping
$ 1,230.83 USD
Free Shipping

BMW recommends valve adjustments every 30k miles on your S54 equipped BMW. We have all the parts you will need to do the job in one discounted package. The kit includes all the Genuine BMW valve shims, valve shim tool, and all the gaskets and seals you will need.

Kit includes:
11127832034 x 1 - Valve Cover Gasket
11127831271 x 6 - Spark Plug Hole Gasket
11121437395 x 2 - Valve Cover Seal Washer Grommet
11127830972 x 13 - Valve Cover Nut Grommet
11340031525 x 1 - Valve Shim Set
83300493743 x 1 - Valve Shim Tool

*Click here for valve adjustment instructions*

This item fits the following BMWs:
2001-2006 E46 BMW M3, M3 Convertible2001-2002 Z3 BMW M Roadster M Coupe2006-2008 Z4 BMW Z4 M Roadster M Coupe

Show More Show Less


Packaged by Turner - Corporate Logo
T#:23482931
Part#: S54KEVACCKT
Ships in 9 Business Days
Sale - Save 3% $ 333.99

This product was last offered at the strikethrough price on
05-03-2026

$ 323.77 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 333.99

This product was last offered at the strikethrough price on
05-03-2026

$ 323.77 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and new tensioner pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:24079595
Part#: S54VNSKT
Ships in 5 Business Days
$ 990.99 USD
Free Shipping on orders $49 and up
The exhaust VANOS hub on the S54 has a common failure point where the tabs that lock into the oil pump disk can break, causing loss of VANOS function or engine damage. This VAC exhaust hub is the perfect upgrade or replacement for your already broken hub. The larger engagement tabs fit the holes on the pump disk for a more secure fit to avoid the hammering of the factory hub faces that cause the broken tabs. Included: VAC S54 VANOS hub Valve Cover Gasket VANOS Gasket Genuine BMW Hardware
Show More Show Less