BMW Engine Parts for BMW Z Series E85/6 (2003-2008)

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

If you have ever attempted to do a valve job or cylinder head gasket project on an M42, M44, M50, or M52 engine you know that the repair manual will refer to the special BMW timing tool kit. This tool kit includes a flywheel locating lock pin, and a special set of camshaft locators that lock the cams in a precise location. The tools are very easy to install. The kit is specifically designed to hold the engine and cams in proper timing during the cylinder head removal and re installation process. This avoids the chance of bending the valves doing the head install process. The precision ground holding blocks lock over the square ends of both intake and exhaust cams. The CNC machined flywheel locating pin passes through a hole in the rear of the engine block and passed through a machined hole in the flywheel.

To avoid improper cam timing on the latest BMW engines, the factory has devised a cam timing system that locks the crankshaft and cams into a specific position prior to cylinder head removal. This method was devised to avoid any misalignment, resulting in piston to valve damage. Unfortunately without these tools re-timing the camshafts after a valve job is almost impossible. The factory specification manual does not supply installation specifications. This cam timing kit includes all the necessary components to do the job.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi

NOTE: Not compatible with S50B30 and S50B32 Euro engines!If you have ever attempted to do a valve job or cylinder head gasket project on an M42, M44, M50, or M52 engine you know that the repair manual will refer to the special BMW timing tool kit. This tool kit includes a flywheel locating lock pin, and a special set of camshaft locators that lock the cams in a precise location. The tools are very easy to install. The kit is specifically designed to hold the engine and cams in proper timing during the cylinder head removal and re installation process. This avoids the chance of bending the valves doing the head install process. The precision ground holding blocks lock over the square ends of both intake and exhaust cams. The CNC machined flywheel locating pin passes through a hole in the rear of the engine block and passed through a machined hole in the flywheel.

 

For BMW M54 applications, coil styles vary between M or N depending on the vehicle's production date. Models produced up to September 2002 require the M series style coil, while those manufactured after September 2002 use N series style coils. It's crucial to visually compare and verify the correct coil needed for your vehicle before making a purchase.

Benefits:

• Specific coil styles for different BMW M54 application dates
• Helps ensure the right replacement part for your vehicle's coil
• Visual verification recommended prior to purchase for compatibility

Enhance Your BMW's Engine Performance with Genuine Oil Pan Gasket - With Bolts Kit

Upgrade your BMW's oil pan gasket with the Genuine part number 11132210959 kit. This essential component is prone to leakage over time, affecting engine performance.

Addressing this issue offers several benefits:

• Genuine part ensures quality and compatibility.
• Prevents oil leaks for improved engine performance.
• Comprehensive kit includes necessary bolts for installation.
• Long-lasting solution for maintaining optimal engine functionality.

Maintain your BMW's engine health by replacing the oil pan gasket with this Genuine kit.

If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span. OEM replacement for the original BMW part # 12411312104 and 12411312130. This is a NEW, not used, component with no included core charge!

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

We recommend replacing hardware when doing your starter, since the bolts are aluminum and threads become stretched: Genuine BMW aluminum starter hardware set 12410392577 

Used on a wide variety of models with the BMW N52, N54, and N55 engines, including: E9X, F01/02, F07/10, E8X, E70, E60/61, F25, F30, and Z4.

The Foxwell i70BT is your solution for a tablet diagnostic scanner that will elevate your level of diagnostics without breaking the bank.  This unit is one step above the standard i70, and we'll explain why below.  This heavy-duty tablet can withstand any work you put it through and will find its place in any garage and/or shop.  The i70 is unlocked with almost any manufacturer you will interact with and is pre-loaded to be compatible up to years 2019/2020 - plus 3 years of free updates to stay relevant for years to come. With dozens of features, 35 additional maintenance functions, and backed by our LIFETIME REPLACEMENT program, this scan tool will get the job done right, every time.

i70BT vs i70:

• *NEW* Fox Link I: i70BT can wireless connect to your vehicle AND supports CAN/FD protocol
• *NEW* Bi-directional control on i70BT
• i70BT is more up-to date off the bat (vehicles 2020/2021, and still including 3 years of free software updates to stay up-to-date)

Why the i70BT?

First, the Hardware:

• Display: 7" color LCD Screen that is daylight-readable
• Memory: 1 GB DDR3L
• Storage: 32 GB SSD
• Connection: Wireless VCI
• Battery: 4000 mAh

What Are Its Standard Features?

• *NEW* Wireless Connection with Foxlink I.
• *NEW* Supports CAN/FD protocol.
• *NEW* Bi-directional control.
• Loaded with the latest models on most cars 2020/2021 and with 3 years of free software updates.
• Compatible with latest models, including cars, SUV's, Minivans, and light duty trucks.
• Gets access to power-train, chassis, and body systems.
• Identifies vehicle quickly and easily with automatic VIN reading.
• Auto Scan function scans vehicle in just a few seconds.
• Reads and clears diagnostic trouble codes.
• Supports the most commonly required service features like brake deactivation, service resets and transmission adaptations.
• Supports ABS bleeding and IMMO functionalities
• Runs on latest Android operating system.
• Screen is usable with gloves.
• FRM testing for BMW/MINI.
• Audi maintenance mode.

How about the Coding and Graphing?

• Views live vehicle sensors data in a text, graph and gauge formats and allows you to focus on any suspicious data.
• Merges multiple interactive sensor graphs, providing you with the most comprehensive and functional look at live data.
• Live data self-learning and alarms when data is over range.
• Records and plays back live data logs to catch intermittent faults.
• For coding features, check out the i70Pro (ES#3698691)!

What Else Makes It Stand Out?

• One touch update via Wi-Fi lets you always have the latest bug fixes, new vehicles, and functionality at your fingertips.
• Unique debug logging feature allows for quicker and more accurate fixes for diagnostic troubles and bugs.
• Instant support available from Foxwell's technical team by TeamViewer remote control

Kit Includes:

• i70BT Main Unit
• VCI Dongle
• USB-C Cable 
• USB Charging Adapter
• Quick Start Guide
• Warranty Card 
• User Manual

For more information about this tool, visit: https://www.foxwelltech.us/product-detail-737.html

For further information past this, please contact Foxwell sales team at: [email protected]

For technical support, please contact: https://www.foxwelltech.com/support/ticket/

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes the following Seals:

• Valve cover gasket
• Spark plug seals

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M54 2.5L 3.0L (09/2002+)