AutoTecknic Universal Carbon Fiber Splitter

The AutoTecknic universal carbon fiber splitter offers an upgraded front-end aesthetic for your vehicle. Crafted with 3K plain weave carbon fiber and a UV clear coat, these splitters boast a lustrous mirror shine finish. Compatible with various bumpers upon proper installation, they deliver:

• Made from 3K plain weave carbon fiber with a UV clear coat finish
• Compatibility with various bumpers with appropriate installation
• Pre-installation drilling for mounting holes required
• Vehicle-specific installation hardware not included
• Provides a sporty appearance without excessive aggressiveness
• Shields the bumper against speed bumps and road dips
• Enhances the overall vehicle appearance while ensuring protection

Designed for those seeking a subtle yet sporty visual enhancement, these splitters safeguard your bumper while boosting your car's aesthetics. Recommended by numerous customers for both its visual appeal and functional benefits.

Package Contents: One set of AutoTecknic universal carbon fiber splitters.

Splitter Dimensions: 21" (Length) x 10" (Depth) x 5" (Width)

Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.

The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.

Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.

For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.

Features and advantages:

Transformative
Enhances the rear aesthetic of the 1 Series
Direct fit utilizing factory clip locations and hardware
Available in Textured Matte Black and Gloss Black
Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer
Compatible with both E82 and E88 models equipped with the M-Sport Package

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2004 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe

Turner Motorsport introduces the Carbon Fiber Performance Spoiler for E82 and E88 BMW models. Crafted with elegance and style, this spoiler adds a sleek touch to your vehicle. Constructed from lightweight yet durable carbon fiber, it not only enhances aesthetics but also improves performance. For installation, Turner Motorsport recommends using a body adhesive like Betalink for optimal results.

• Elegant and tasteful design enhances BMW's appearance
• Lightweight carbon fiber construction adds a sporty touch
• Durable build ensures long-lasting performance
• Improves vehicle aerodynamics
• Easy installation with recommended body adhesive

Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.

The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.

Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.

For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.

Features and advantages:

Transformative
Enhances the rear aesthetic of the 1 Series
Direct fit utilizing factory clip locations and hardware
Available in Textured Matte Black and Gloss Black
Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer
Compatible with both E82 and E88 models equipped with the M-Sport Package

Clinched Fender Flares

Clinched specializes in crafting fender flares using high-quality, impact-resistant ABS plastic, akin to the material used in OE bumpers. These flares exhibit:

• Sturdiness and lightweight design
• Universality for installation on various vehicle makes and models
• Options for blending with the car's body or showcasing exposed rivets and edges

The installation of Clinched Flares necessitates the drilling and cutting of original fenders. By using a heat gun or hairdryer, the flares can be shaped to fit seamlessly along the factory body lines, highlighting their exceptional pliability compared to fiberglass alternatives.

Upgrade the appearance and durability of your BMW with Clinched Universal Fender Flares. Crafted from high-quality, impact-resistant ABS plastic, these fender flares offer strength and lightweight performance. They are designed to be versatile, suitable for installation on various makes and models with minimal customization. Whether blended with the car body or left with exposed rivets and edges, Clinched Flares provide a distinctive look.

• Made from high-quality ABS plastic for durability
• Universal design for versatile installation
• Can be blended with the car body or left with exposed rivets and edges
• Includes Type 3 hardware kit for installation
• Alternate hardware available for fine-tuning fitment

Clinched Fender Flares: Versatile and Impact-Resistant

Revamp your vehicle's appearance with Clinched Fender Flares, expertly crafted from high-quality, impact-resistant ABS plastic, ensuring strength and lightweight construction similar to OE bumpers. Designed for versatility, these universal flares offer compatibility with various makes and models, allowing easy installation with minor adjustments. Customize your vehicle's look by blending the flares seamlessly with the car's body or leaving them with exposed rivets and edges.

Clinched Flares are installed using rivets and bolts, requiring drilling and cutting of the original fenders for installation. Heat the flares with a heat gun or hair dryer to mold them precisely along the factory body lines. These flares stand out due to their high pliability, distinguishing them from fiberglass alternatives.

Transform your BMW's appearance and durability with Clinched Fender Flares, expertly crafted from premium-grade, impact-resistant ABS plastic. Engineered to match the material of OE bumpers, these flares offer superior strength while remaining lightweight. Designed to fit a wide range of makes and models, they can be seamlessly integrated into your car's body or left to showcase rivets and edges for added flair. Installation involves drilling and cutting your original fenders, with rivets and bolts ensuring a secure attachment. Use a heat gun or hair dryer to mold the flares to your vehicle's contours, taking advantage of their exceptional pliability for a perfect fit.

• High-quality, impact-resistant ABS plastic construction
• Lightweight yet exceptionally strong
• Universal design for versatile compatibility
• Option for blending with car body or showcasing rivets and edges
• Secure installation with rivets and bolts
• Easily molded to follow factory body lines

Adding a carbon fiber roof saves you 15kg or more at the highest point of your vehicle - the roof. Not only does a full carbon fiber roof give your vehicle the signature BMW ///M look, but it also gives your vehicle a lower center of gravity.

Turner Motorsport highly recommends professional installation - installation requires removal of factory roof. 

Enhance your BMW's aerodynamics and aesthetics with this Carbon Fiber spoiler. Crafted from high lightweight carbon fiberglass, this spoiler offers maximum strength and adjustability. Its aerodynamic design provides both striking good looks and maximum downforce.

• Crafted from high lightweight carbon fiberglass
• Maximum strength and adjustability
• Aerodynamic design for maximum downforce
• Includes special NRG Logo side mounts
• Easy installation with all components and bolts included