Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your N52/N54 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install

If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Product Features:

Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

Upgraded or replacement silicone heater hose for our N54 expansion tank relocation kits.

60" silicone performance coolant hose featuring a molded 90-degree bend for installs with space constraints.

Features and benefits:

Constructed of 4-Ply reinforced silicone for improved durability over the failure-prone rubber hoses.
Reduced thermal conductivity
Improved resistance to ozone and UV degradation for improved performance and durability.
Turner branded

Track-tested and street-ready. the ULTIMATE cooling system upgrade for your N54 or N55!

Ditch your failure-prone plastic end tanks and increase cooling capacity by 25%, all without modifying your core support or accompanying shrouds. The CSFxTurner Performance Triple-Pass Radiator is the best cooling system upgrade for your N54/N55-equipped BMW!

The BMW 135i and 335i deliver serious performance straight from the factory, thanks to the twin-turbocharged N54 and single-turbo N55 engines. With strong midrange torque, high-revving capabilities, and proven tuning potential, these engines punch well above their weight. However, while the powertrain excels, the factory cooling system often falls short, especially under sustained boost or track conditions. Heat soak, rising coolant temps, and long-term thermal stress are common issues for enthusiasts pushing their N54 or N55 hard, making a performance radiator an essential upgrade for reliability and consistency.

Recognizing the critical need for increased cooling capacity, the team at Turner Motorsport partnered with CSF Race, world leaders in high-performance cooling systems with over 50 years of experience. The result is an Upgraded Performance Radiator: a high-performance, motorsport-grade upgrade engineered to keep your N54/N55 cooler and on the track for longer.

Design:

CSF-Exclusive "B-Tube" Technology
Unlike conventional "O-tube" designs, CSF’s patented "B-tube" structure increases wall strength while creating a more efficient flow path. This alone accounts for a 15% increase in cooling capacity over an OE "O-tube" radiator!
Dual Core Design
2-Row 42mm Core (Dual Core) Featuring CSF's Exclusive B-Tube Technology
Two-Row Compact Structure
This radiator was designed with precise fitment in mind. While total tube count and size are increased, the overall radiator dimensions stay the same as OE, ensuring a drop-in fit with zero modifications required.
25% Increase in Cooling Capacity
All of the above design features translate to a massive 25% cooling increase over the stock radiator!
FEATURES & BENEFITS

Direct-fit upgrade, no modifications required!
Accepts all OEM attachments via CNC-machined "Quick-Connect" hose ends and accessory mounting provisions
TIG-welded aluminum construction provides increased durability
An all-aluminum drain plug replaces the weak OE plastic unit, ensuring seamless functionality for the life of the radiator
Increased cooling efficiency for high-performance and racing use
Aluminum drain plug
Designed and tested by Turner Motorsport in collaboration with CSF Race
Backed by the Turner Lifetime Replacement Program
Every unit features precision CNC-machined brackets and OE-style connections for a seamless, drop-in installation using factory or aftermarket hoses. Whether you're building a track weapon or a high-horsepower street car, this Turner x CSF radiator is the cooling solution your N54 or N55 needs to perform reliably under pressure. All backed by the Turner Lifetime Replacement Program.

Prevent costly oil leaks when installing a new MSL oil cooler from Mosselman. These high-quality rubber gaskets ensure your oil thermostat is sealed properly, guaranteeing peak performance and long service life.

Kit includes:

2x Oil Pressure Hose O-Ring 1x Oil Filter Housing Gasket

Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.

ECS Tuning's Aluminum Coolant Bleeder Screw replaces Genuine BMW Part Number 17111712788

Why not upgrade when you're due for a replacement? The ECS Tuning silicone hose replacement fixes these issue with two key features in their design. Offering this hose in a much more heat resistant silicone instead of OE rubber and having the hose wrapped in aluminum. The aluminum coating acts as a heat shield to further protect the silicone as well as reducing the temperatures forced on the coolant running through the hose. 

Replaces OE hose #11537545665

Enhance the flexibility of your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting. Ideal for applications such as single turbo setups or forward-facing intake manifolds, this fitting provides extra clearance and versatile hose routing options.

Key Benefits:

• Allows hose to run straight down, increasing clearance
• Made of durable 6061-T6 aluminum for long-lasting performance
• Anodized black finish for enhanced durability and corrosion resistance
• Includes fitting and clamp for easy installation

Upgrade your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting for improved performance and versatility.

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, this ECS Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, ECS hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Key Benefits:

Direct OE Fitment – Perfectly molded to factory specifications for seamless installation. Enhanced Durability – Heat-resistant silicone prevents cracking, swelling, and deterioration over time. Superior Cooling Performance – Smoother internal passageways improve coolant flow and system efficiency. Pre-Installed Quick-Connect Fittings – Hassle-free installation with OEM-style connectors. Premium Hardware Included – Comes with German-style stainless steel worm-drive hose clamps for a secure fit. Kit Includes:

Upper Radiator Hose Lower Radiator Hose Pre-Installed Factory "Quick-Connect" Flanges (4) Stainless Steel Worm-Drive Hose Clamps (4) Replaces OEM Part Numbers: 17127531579 & 17127564478

Upper and lower radiator silicone coolant hose kit to upgrade from your stock rubber hoses. Includes stainless steel hose clamps.

Upgrade all of those common, aging, dry-rotted rubber hoses under the hood of your vehicle with ECS durable, Silicone Radiator Coolant Hose Set. These perform and look great within any engine bay, they are made to last longer than standard rubber hoses and are perfectly molded to the OE hose specifications for a simple installation on most vehicles.

Made from heavy duty, reinforced silicone, this silicone coolant hose set can handle higher temperatures and greater pressure than the stock, squishy rubber hoses. Designed to resist oil, fuel and electrochemical degradation and tested up to continuous 250° Fahrenheit operating temperature and over 45psi, you can expect to achieve greater reliability, less turbulence and improved flow with our smooth silicone hoses.

Kit contents:

Upper Radiator hose
Lower Radiator hose
4 factory flange connections
German-style stainless steel hose clamps
With the smoother internal passageways, consistent hose internal diameters, and smoother bends will result in improved flow for greater cooling system performance with added durability.

The perfect way to take the worry out of your coolant hoses and keep your engine from potentially overheating.

CSF is one of the premier cooling product specialists available on the market thanks to designs such as their High Performance Aluminum Radiators. Using a single pass designed core, this radiator gives you all the cooling you could ever need. Paired with these radiators are CNC machined brackets and corrosion resistant hardware that allow final installation to have a same as stock fitment! This enables you to have much higher cooling without having to cut away any metal or delete any important components just for the sake of lower coolant temperatures. 

Features:

• Two-row, triple-pass design radiator core
• CNC machined mounting brackets
• All needed hardware included
• Hand polished aluminum with a mirror-like finish
• Stock fitment prevents modification to engine bay

Fits the following BMWs:
2006-2012 E9X BMW 325i 328i 330i

Ensure your BMW's engine performs at its peak with the installation of this highly efficient oil cooler from Mishimoto. Even in ideal driving conditions, elevated oil temperatures can lead to decreased pressure and compromised engine lubrication. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, all meticulously designed to reduce oil temperatures and uphold optimal driving circumstances.

• Rows: 19
• Overall Dimensions: 13" x 5.5" x 2"
• Core Dimensions: 11.25" x 5.5" x 2"
• Braided Hoses: 4ft .75 inch & 4ft 9 inch
• Braided Hose Fittings: -10AN
• Sandwich Plate Fittings: -10AN

Please take into consideration that this product may be subject to Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968). Proposition 65 is a California law that applies to companies selling products in California and necessitates the disclosure of chemicals known to cause cancer, birth defects, or other reproductive harm when present at levels exceeding specified thresholds. For further information regarding California Prop 65 warnings, visit www.P65Warnings.ca.gov.

Ensure a tight and leak-free seal in your BMW's cooling, vacuum, or intake systems by installing a new adjustable hose clamp. Over time, clamps can deform or lose their tightness due to aging or frequent removal, potentially causing leaks in your coolant or vacuum hoses. Avoid the risk of leaks by replacing old clamps with new hardware, offering peace of mind against coolant and vacuum system issues.

Key benefits of the adjustable hose clamp include:

• Maintaining a secure and leak-free seal in your BMW's systems.
• Preventing coolant or vacuum leaks that can affect performance.
• Adjustable size from 70mm to 78mm for versatile applications.

Upgrade your hose clamps to ensure optimal performance and reliability in your BMW's systems.

BMW & MINI Universal Oil Cooler - 10 Row is a versatile cooling solution designed to enhance the performance and reliability of BMW and MINI vehicles. This high-quality oil cooler provides efficient cooling for the engine oil, ensuring optimal operating temperatures and extending the life of vital engine components.

Crafted with precision engineering and durable materials, the BMW & MINI Universal Oil Cooler - 10 Row is compatible with a wide range of BMW and MINI models, offering versatility and ease of installation. It effectively dissipates heat from the engine oil, reducing the risk of overheating and engine damage.

• Enhances performance and reliability of BMW and MINI vehicles
• Efficient cooling for engine oil, ensuring optimal operating temperatures
• Extends the life of vital engine components
• Compatible with a wide range of BMW and MINI models
• Versatile and easy to install
• Crafted with precision engineering and durable materials

Investing in the BMW & MINI Universal Oil Cooler - 10 Row is a smart choice for BMW and MINI owners looking to improve their vehicle's performance and longevity.

Universal Oil Cooler Black - 10 Row is engineered to maintain optimal oil temperatures and ensure peak engine performance under various driving conditions. This high-performance oil cooler effectively reduces oil temperatures, preventing a drop in pressure and maintaining proper engine lubrication. Featuring a robust 10-row design, it offers superior cooling efficiency compared to standard coolers.

• Efficient Cooling: The 10-row design enhances cooling capacity to manage high oil temperatures effectively.
• Durable Construction: Black finish provides durability and resistance to environmental factors.
• Optimized Performance: Helps prevent a drop in oil pressure and maintains proper engine lubrication.
• Versatile Fitment: Universal design suitable for various vehicles and applications.
• Compact Size: Overall dimensions of 12.95" x 3.8" x 1.97" and core dimensions of 11" x 2.76" x 1.97" ensure a good fit in most engine bays.

WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, this ECS Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, ECS hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Key Benefits:

Direct OE Fitment – Perfectly molded to factory specifications for seamless installation.
Enhanced Durability – Heat-resistant silicone prevents cracking, swelling, and deterioration over time.
Superior Cooling Performance – Smoother internal passageways improve coolant flow and system efficiency.
Pre-Installed Quick-Connect Fittings – Hassle-free installation with OEM-style connectors.
Premium Hardware Included – Comes with German-style stainless steel worm-drive hose clamps for a secure fit.
Kit Includes:

Upper Radiator Hose
Lower Radiator Hose
Pre-Installed Factory "Quick-Connect" Flanges (4)
Stainless Steel Worm-Drive Hose Clamps (4)
Replaces OEM Part Numbers: 17127599450 & 17127540127