BMW Engine Parts for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

URO In-Tank Fuel Pump - E82, E88, E90, E92, E93
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:593025
Part#: 16147194207
In Stock
$ 258.99 USD
Free Shipping
$ 258.99 USD
Free Shipping
Replace your failed fuel pump
Vargas Turbo Technologies - Corporate Logo
T#:18733527
Part#: VTT-CRANKHUB-2
Ships on Oct 13, 2026
$ 871.99 USD
Free Shipping
$ 871.99 USD
Free Shipping
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122281
Part#: TRIPLECAPCLR1
Ships on Oct 13, 2026
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less

URO Oil Filter Housing - With Cap
For vehicles with High Speed Synchronization (oil cooler) option
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:640564
Part#: 11428683206
Ships in 2 Business Days
$ 305.99 USD
Free Shipping
$ 305.99 USD
Free Shipping
The aluminum oil filter housings can crack causing oil leaks which leads to a mess and possible engine damage. This Bremmen replacement unit has the oil housing, the oil cooler, sensor and gaskets to get your car sealed up and working properly again all in one go!
Show More Show Less

ARP Head Stud Kit - BMW N55/S55
N55 Engines must be drilled & tapped for proper installation
5150 Autosport - Corporate Logo
T#:23416542
Part#: ARP-HSK-S56-CA
Ships in 1-2 days
$ 999.99 USD
Free Shipping
$ 999.99 USD
Free Shipping
Vargas Turbo Technologies - Corporate Logo
T#:390086
Part#: N55-STG1-PWG-NEW
Ships on Oct 13, 2026
$ 1,254.00 USD
Free Shipping
$ 1,254.00 USD
Free Shipping

Vargas Turbo Technologies - Corporate Logo
T#:5122265
Part#: VTTFILTERCAPRED
In Stock
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122279
Part#: TRIPLECAPBLK1
Ships on Oct 13, 2026
$ 220.99 USD
Free Shipping
$ 220.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less

OEM Valeo Alternator - 185 amp
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:376244
Part#: 12317525376
Ships in 2 Business Days
$ 730.23

This product was last offered at the strikethrough price on
07-16-2026

$ 677.42 USD
Free Shipping
$ 677.42 USD
Free Shipping

The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator.

This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!

Show More Show Less

Baum Tools - Corporate Logo
T#:641886
Part#: B130190KIT
Ships in 6 Business Days
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping
Includes 130190, 130191 and 130280
THINKCAR - Corporate Logo
T#:2302718
Part#: 301180767
Ships in 2 Business Days
$ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 86.99 USD
Free Shipping
$ 86.99 USD
Free Shipping
ThinkDiag is prefect to use with the unique THINKCAR app. Easy and convenient, anytime and anywhere.
OEM VDO Mass Air Sensor -- N52 BMW
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:14962
Part#: 13627551638
Ships in 2 Business Days
$ 267.12

This product was last offered at the strikethrough price on
05-11-2026

$ 265.53 USD
Free Shipping
$ 265.53 USD
Free Shipping

This is a high quality replacement OEM VDO Mass Air Sensor.The MAF controls the amount of fuel that goes through the injectors based on the volume of air coming through the intake. If your vehicle is giving you a MAF code, replace it immediately to ensure you get the best gas mileage and performance. It is common for this part to fail slowly and cause poor fuel mileage and hampered performance. When it fails completely, the vehicle will stutter and stall as it falls into a limp mode. One way to check if your MAF is bad is to unplug the connector before starting your car. If it idles well (compared to a previous poor idle), your MAF needs replaced. If you let this maintenance part go, your fuel economy will suffer as too much fuel is going into the engine and not being burned. A great way to give your vehicle an efficiency boost.

OEM replacement for BMW part # 13627551638.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:5122264
Part#: VTTFILTERCAPBLK
Ships on Oct 13, 2026
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
CTS - Corporate Logo
T#:23185032
Part#: CTSIT900
In Stock
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping

BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE) is the ultimate upgrade for your BMW's N54 engine, designed specifically for use with the TiAL Q atmospheric blowoff valve. Offered by Turner Motorsport, this CTS Turbo BOV kit includes a 3" mandrel-bent T6 6061 aluminum pipe, finished in a durable black powder coat for long-lasting performance and sleek appearance. The kit ensures a secure fit with 4-ply silicone connectors and stainless steel clamps, providing an OEM-like fit with an aggressive aftermarket sound. Additionally, the pipe features two water-methanol bungs with 1/8" NPT plugs, a CNC machined MAP sensor flange, and a laser-etched CTS Turbo logo. Replace the weak plastic charge piping and failure-prone diverter valve system with this high-quality upgrade, enhancing your ability to hold boost under heavy loads while adding a distinctive sound to your BMW.

  • Designed for use with TiAL Q atmospheric blowoff valve
  • Durable 3" mandrel-bent T6 6061 aluminum pipe with black powder coat finish
  • CNC machined MAP sensor flange for seamless OEM installation
  • Includes 4-ply silicone connectors and stainless steel clamps for secure fit
  • Features two water-methanol bungs and laser-etched CTS Turbo logo
  • Enhances boost holding capacity and provides an aggressive aftermarket sound
Show More Show Less
MMX Performance - Corporate Logo
T#:45039725
Part#: MMR20-1004FK
Ships in 3 Business Days
$ 1,227.99 USD
Free Shipping
$ 1,227.99 USD
Free Shipping
The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.
Show More Show Less

N55 Stage 1 Turbo Upgrade
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:398009
Part#: N55-STG1
Ships in 10 Business Days
Starting at $ 1,549.65 USD
Free Shipping
Starting at $ 1,549.65 USD
Free Shipping

Vargas Stage 1 N55 turbo upgrade is good up to 425whp with proper tuning and high grade fuel. Vargas N55 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N55.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 425. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less

Radium Engineering - Corporate Logo
T#:31059457
Part#: 20-1440
In Stock
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping
BMW N55 Stage 1 Turbo Install Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:15677573
Part#: VTT-N55-INSTL-2
Ships on Oct 13, 2026
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping
Includes gaskets and O-rings necessary to install your new N55 turbo! If you need studs, manifold gaskets, downpipe gasket, and copper nuts, see T#398463 for the full install kit

Pure Turbos N54 Stage 2 "Hi-Flow" Turbo Upgrade - E9X 335i/is/xi N54 ...
For use with 2.0" inlet pipes only - Not compatible with stock inlets
Pure Turbos - Corporate Logo
T#:578242
Part#: PURE-N54-0004KT
In Stock
$ 4,042.99

This product was last offered at the strikethrough price on
07-13-2026

$ 4,029.00 USD
Free Shipping
$ 4,029.00 USD
Free Shipping
As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. For the enthusiast hunting for big power out of their N54, Pure Turbos has the answer with their Stage 2 "Hi-Flow" turbocharger upgrade. With supporting modifications, 600-700 reliable wheel horsepower is achievable - enough to be wild on the street and highly competitive on the track or strip.
Show More Show Less
Billet N54 Valve Cover - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:557949
Part#: VTTVCOVBCR
Ships in 10 Business Days
Starting at $ 1,448.99 USD
Free Shipping
Starting at $ 1,448.99 USD
Free Shipping

The N54 valve cover, while not a terrible design, has it's share of flaws. Most owners have had to replace this part over time as it can crack for seemingly no reason. Additionally, the stock valve cover has its limitations for vacuum and PCV connectivity. 

VTT is proud to offer a ground-up system designed to give the end user complete control over their valve cover/ PCV set up. Tired of being told you will run two -10 lines from your VC to your Catch Can? Now you can run them any way you want! Including complete VTA, oil cap one-way breather, or whatever else you may need. This i a true solution that solves many plumbing headaches. 

Accessability options aside, this part looks magnificent. CNC Machined and anodized in your choice or Red, Black, or Clear, this valve cover is sure to turn heads!

Details:

  • 100% CNC 6061-T6 Aircraft aluminum construction
  • Anodized in a variety of colors
  • Custom logo available on the cap
  • Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover - only 1.8 lbs difference)
  • Gives the end user true variety for setting up their Valve Cover and PCV System

This part fits the following BMW engines:
2006-2013 N54



 

Show More Show Less

Fuel-It! - Corporate Logo
T#:403280
Part#: FILPFPK4
Ships in 2 Business Days
Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping
Sale - Save 3%
$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.  

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol. 

The Stage 2 bucketless kit includes the following:

    • A custom anodized billet fitting for the pump output and stock fuel line connection.
    • Our custom billet aluminum anodized bracket for the pump and float assembly
    • Two cotter pins to secure your float assembly
    • A new E85 compatible Walbro 450 pump
    • Spare vent tube clip
    • A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

    • A complete plug and play solution by simply adding the secondary module
    • Our custom billet aluminum fitting to run both pumps in parallel
    • A new E85 compatible Walbro 450 pump
    • Wiring harness for the secondary pump
    • Spare vent tube clip
    • A new Walbro filter
  • Recommended accessories:
    • Lock Ring Removal Tool
    • Hobb's switch 
       
  • NOTE: These kits include a basic filter assembly.  When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump.  In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns.  Again for those applications we'd recommend one of our standard pump applications.
Show More Show Less

E9X M3 6/2008+ Dinan Underdrive Pulley Kit
For vehicles with a production date from 06/2008
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:389532
Part#: D560-0004
Ships in 6 Business Days
Sale - Save 10% $ 449.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 404.96 USD
Free Shipping
Sale - Save 10%
$ 449.99

This product was last offered at the strikethrough price on
09-27-2026

$ 404.96 USD
Free Shipping
Mishimoto - Corporate Logo
T#:599444
Part#: MMBCC-N55-11CBE
In Stock at Vendor
9% off MSRP $ 300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 272.99 USD
Free Shipping
9% off MSRP
$ 300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 272.99 USD
Free Shipping
BMW 335I/335XI/135I Direct Fit Catch Can, 2011-2013 Direct fit for 2011-2013 BMW 335I/335XI/135I Single 2-Port Compact Baffled Oil Catch Can separates oil particles using 50-micron bronze filter Application-specific bracket mounts the can in a serviceable location Billet 6061 aluminum sealed can Defends intercooler, intake system, and VANOS system from oil blow-by Helps maintain proper octane levels to reduce potential detonation Internal air diverter increases air turbulence to improve oil separation Filters and can are fully serviceable Mishimoto Lifetime Warranty The Mishimoto BMW N55 Baffled Oil Catch Can is designed and engineered to reduce carbon build-up, a common issue with the direct fuel injection N55 engines. The Mishimoto BMW N55 catch can kit uses proven engineering from the Mishimoto 2-Port Compact Baffled Oil Catch Can, with its bronze filter and internal baffle, to better separate the oil from the crankcase vapors. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
VTT N54 Wastegate Removal Tool
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:587520
Part#: VTT-WG-TOOL
Ships on Oct 13, 2026
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping
Need to replace the wastegates on your N54 turbos, but do not have the tools to get the bungs out of the housings? This can be frustrating, and require sending your housings to a shop with a large press or make a puller. Vargas Turbo Technologies take the guesswork out of it for you by offering a tool that makes bung removal simple, and easy. Simply grind your old flappers off, and remove them from the bungs, then using the VTT tool the bung removal is a snap. Once out, you can reinstall the new bungs and have the flappers welded in the proper location. The tool is made from steel for high strength and long life. This tool is a must-have when doing wastegates on the N54 turbos! Tool kit comes the following: 1 Bung sleeve 1 Threaded removal arm 1 7/16"-14 3" bolt
Show More Show Less


VF Engineering - Corporate Logo
T#:378755
Part#: VFK91-02
Ships on Oct 14, 2026
13% off MSRP $ 7,995.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,995.00 USD
Free Shipping
13% off MSRP
$ 7,995.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,995.00 USD
Free Shipping
BMW Supercharger Kits can be found all over the internet, but who should you choose to go with? If you want to go to with a forced induction system and want reliability and a driving feel that isn't adversely affected, the VF Engineering Supercharger Kit is one of the best options on the market. Included with every supercharger system is their custom proprietary VF.GIAC software that safely realigns all fueling and engine management parameters for optimal performance and long term drivability. Unlike many other options that are available, the VF Supercharger kit is designed to work with BMW's OEM parameters to minimize the likelihood of DTCs (Diagnostic Trouble Codes) and Check Engine Lights.
Show More Show Less
ARP - Corporate Logo
T#:4309
Part#: 100-9942
In Stock at Vendor
$ 202.99 USD
Free Shipping
$ 202.99 USD
Free Shipping
We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener.
Mahle Motorsports - Corporate Logo
T#:2928989
Part#: 197843642
Ships in 3 Business Days
$ 1,429.99 USD
Free Shipping
$ 1,429.99 USD
Free Shipping
Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less

Bosch - Corporate Logo
T#:639734
Part#: 12317837981BKT
Ships in 2 Business Days
$ 526.99

This product was last offered at the strikethrough price on
05-07-2026

$ 513.99 USD
Free Shipping
$ 513.99 USD
Free Shipping
*Price includes a refundable $75 Core Charge* The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! Bosch Part Numbers: AL9454X, 0986UR6290 Replaces the following BMW part numbers: 12317837981, 12317838656
Show More Show Less

Fuel-It! - Corporate Logo
T#:403249
Part#: FILPFPK1
Ships in 1 Business Day
Starting at $ 199.99 USD
Free Shipping
Starting at $ 199.99 USD
Free Shipping

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

  • SAE J30R10 E85 compatible fuel line
  • 14ga fuel resistant wiring harness
  • Quick connect female bullet connectors (2)
  • Vent tube replacement clip
  • Nylon cable ties (10)
  • Stainless steel lock nuts (2)
  • 10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
  • Pushlock pump retention fittings (2)
  • 14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)

    *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.

    ** IMPORTANT:  Do NOT attempt to run this kit inline with a Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Show More Show Less
Spline Lock Crank Hub Solution W/ Hardware Package - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:18733526
Part#: VTT-CRANKHUB-4
Ships on Oct 13, 2026
$ 880.99 USD
Free Shipping
$ 880.99 USD
Free Shipping
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less

Spline Lock Crank Hub Solution
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:8061334
Part#: VTT-N55-CRANKHUB
Ships on Oct 13, 2026
$ 818.99 USD
Free Shipping
$ 818.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.
Show More Show Less
Bosch - Corporate Logo
T#:555550
Part#: 13627801158
Ships in 2 Business Days
$ 235.99

This product was last offered at the strikethrough price on
05-07-2026

$ 166.39 USD
Free Shipping
$ 166.39 USD
Free Shipping

Restore the performance of your BMW M57 3.0L & N57 3.0L Engines with Turner Motorsport's Bosch Oxygen Sensor. If your engine is displaying an oxygen sensor check engine light, it's time to replace it with this high-quality unit. The oxygen sensor plays a crucial role in adjusting fuel mapping for reduced emissions and improved fuel economy by measuring the amount of unburned fuel in the exhaust pipe.

  • Ensures proper fuel mapping for reduced emissions
  • Improves fuel economy for better mileage
  • Restores engine performance and efficiency
  • Easy replacement process for quick restoration
  • Application of anti-seize prevents thread seizing

Ensure your BMW's engine operates at its best with regular maintenance, as oxygen sensors tend to fail slowly over time.

Show More Show Less

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ PWG
For vehicles with pneumatic waste gate (PWG)
Pure Turbos - Corporate Logo
T#:578272
Part#: PURE-N55-0001KT
Ships in 5 Business Days
$ 2,906.99

This product was last offered at the strikethrough price on
07-14-2026

$ 2,800.00 USD
Free Shipping
$ 2,800.00 USD
Free Shipping
As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $300 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with pneumatic waste gate (PWG)
Show More Show Less

CobbTuning - Corporate Logo
T#:378522
Part#: 6B1X31P
Ships in 3 Business Days
$ 1,195.00 USD
Free Shipping
$ 1,195.00 USD
Free Shipping

Looking to increase power without sacrificing reliability or drivability? This Stage 1+ Power Pack from COBB Tuning is a great option! Including COBB's Accessport V3, a High Flow Air Filter, and COBB Front Mount Intercooler, you will get dramatically colder charge air, increased flow, and increased power output without having to make any modifications!

In addition to greater, colder air flow, the Accessport V3 allows for easy fuel map and tuning changes plus real time monitoring of 6 parameters at a time!

BMW N54 Stage 1+ Power Package w/V3

  • BMW-001 Accessport V3
  • Easily Change Maps with the Push of a Button
  • High Flow Air Filter
  • Front Mount Intercooler
  • 60% Larger Volume Core

Fits the following BMWs:
E82/88 BMW 135i 1M
E9X BMW 335i/is/xi

Show More Show Less
Continental Knock Sensor - N52
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:580193
Part#: A2C59517063
Ships in 2 Business Days
$ 152.11 USD
Free Shipping
$ 152.11 USD
Free Shipping


Genuine BMW Ping Sensor -
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less
Rein Crankcase Ventilation Hose - E60, E61, E90, E91
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:591594
Part#: 11157567802
Ships in 4 Business Days
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping
From oil separator to oil pan vent tube


Ignition Projects - Corporate Logo
T#:1637696
Part#: IP-A122609
Ships in 6 Business Days
$ 1,055.00 USD
Free Shipping
$ 1,055.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less
Secondary Air Injection Pump - E82 E88 E90 E92 E93
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:2824948
Part#: 11727557903
Ships in 2 Business Days
$ 350.99 USD
Free Shipping
$ 350.99 USD
Free Shipping
The secondary air injection pump injects fresh air into the exhaust stream to help burn off harmful pollutants in the catalytic converter. If the injection pump begins to fail, since it is a vital part of the emissions system, a fault code will be triggered. Sometimes, when pulling off the lower secondary air pipe, you may see water pour out. This is a sign that your pump is more than likely faulty. By simply replacing this pump, efficiency can be restored and there will be no worry about failing an emissions test.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:398499
Part#: VTT-N54-CHRA-1K
Ships on Oct 13, 2026
$ 1,280.99 USD
Free Shipping
$ 1,280.99 USD
Free Shipping
Stage 1 Turbocharger with upgraded TD04 Thrust assembly, and Billet Compressor wheels - These are stage 1 N54 turbocharger upgrades using a new cast bearing housing, new cast VTT N54 compressor housing machined for a 14T billet compressor wheel, reman turbine wheel, 14T Billet compressor wheels, all brand new internals using the upgraded TD04 thrust assembly.
Show More Show Less

PFS - Corporate Logo
T#:590135
Part#: E90BUCKETSTKSS
Ships on Oct 13, 2026
$ 551.99 USD
Free Shipping
$ 551.99 USD
Free Shipping

Elring - Corporate Logo
T#:379377
Part#: 11117567210
Ships in 2 Business Days
$ 207.99

This product was last offered at the strikethrough price on
05-07-2026

$ 201.99 USD
Free Shipping
$ 201.99 USD
Free Shipping
Address pesky oil leaks with this gasket set from BMW
Vargas "Spline Lock" Crank Hub Solution - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:558924
Part#: VTT-N54-CRANKHUB
Ships on Oct 13, 2026
$ 818.99 USD
Free Shipping
$ 818.99 USD
Free Shipping
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.
Show More Show Less

Advanced Fuel Dynamics - Corporate Logo
T#:589664
Part#: PFC-E9XM3K
Ships in 2 Business Days
Starting at $ 899.00 USD
Free Shipping
Starting at $ 899.00 USD
Free Shipping
This full bolt on kit is a complete solution allowing you to alternate between standard and flex fuels without any tuning or mode switching.
Mahle Motorsports - Corporate Logo
T#:2928972
Part#: 197832225
Back Ordered
$ 1,088.99 USD
Free Shipping
$ 1,088.99 USD
Free Shipping

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm delivers exceptional performance and reliability for BMW engines. This high-quality piston kit is designed to replace the weaker factory cast aluminum pistons with robust forged pistons, enhancing durability and heat tolerance for extreme engine conditions.

  • Enhanced Strength: Forged from 2618 aluminum, these pistons are more resistant to extreme heat, detonation, and high pressure, providing superior performance.
  • Precision Specifications:
    • Bore: 84.50mm
    • Stroke: 89.6mm
    • Rod: 145.05mm
    • CH: 31.7mm
    • Piston Style: Dish with 4 valve reliefs
    • Crown Volume: 17.2cc
    • Piston Mass: 314g
    • Pin Diameter: 22mm
    • Pin Style: Floating
  • Complete Kit: Includes pistons, pins, clips, and rings (1.0mm, 1.2mm, 2.8mm thickness).
  • Durable Coatings: Features phosphate, Grafal, and hard anodized top ring groove for added longevity.
  • Sold as a Set: Comes as a set of 6 pistons.

MAHLE Motorsport's PowerPak and PowerPak+ piston kits are engineered for both high-performance and everyday driving, offering a reliable upgrade for BMW engines. With over 95 years of performance experience, MAHLE Motorsport provides advanced features and superior quality for your engine build.

Show More Show Less

Slon Workshop - Corporate Logo
T#:15544970
Part#: E9XVANOSBA
In Stock
$ 438.99 USD
Free Shipping
$ 438.99 USD
Free Shipping
The plastic OE vanos cover in your engine is commonly prone to cracking and failure leaving plastic pieces inside your engine and leading to catastrophic failure. Replace them with these IND Slon upgraded vanos covers to prevent further issues giving you and your engine an extra level of peace of mind.
Show More Show Less

Genuine BMW - Corporate Logo
T#:536508
Part#: 13628589846
Ships in 1-2 days
2% off MSRP $ 815.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 795.99 USD
Free Shipping
2% off MSRP
$ 815.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 795.99 USD
Free Shipping
Victor Reinz Cylinder Head Gasket - E60, E61, E71, E82, E88, E90, E92...
1.52mm (+0.30) thickness - for use with a machined head
Victor Reinz - Corporate Logo
T#:373831
Part#: 11127557266
Ships on Oct 14, 2026
$ 201.99 USD
Free Shipping
$ 201.99 USD
Free Shipping
.30 thicker than stock
Single Turbo Fittings - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:557947
Part#: VTT-SINGLE-FITTI
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping

Going single on your N54 powered vehicle? You are going to have a few ports that need blocking on your motor. These fittings are just the ticket allowing you to block one or both of the water fittings on the block, block the rear drain, adapt the front drain for -10 AN, and convert your push in style feed to a 1/8"NPT to fit any number of fitting options.

All fittings are Made from 6061-T6 aircraft aluminum with black anodizing for a long-lasting finish and come with the O-ring needed.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less


Vargas Ignition Coil Kit (Black) - N5x
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309609
Part#: VTT-COIL-N5X-BLK
Ships on Oct 13, 2026
$ 167.99 USD
Free Shipping
$ 167.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
URO Premium - Corporate Logo
T#:1918449
Part#: 11537558900
Ships in 2 Business Days
$ 70.99 USD
Free Shipping
$ 70.99 USD
Free Shipping
Comes with a lifetime warranty