From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

Safeguard your valuable BMW wheels from potential theft using ECS Tuning Wheel Lock sets, providing additional peace of mind without necessitating expensive alterations. These wheel locks, replacing one wheel bolt, come equipped with a special socket tool for straightforward removal, ensuring the security of your prized wheels.

• Safeguards expensive wheels from theft
• No need for costly alterations
• Each set includes a special socket tool for easy removal
• Factory bolt length (28mm) with conical seat design for compatibility with most aftermarket wheels
• Caution: Avoid overtightening or using air tools
• Lock keys designed for a specific bolt orientation

BMW E30 Wheel Stud Conversion Kit - Full Set

Transform your BMW E30 with the BMW E30 Wheel Stud Conversion Kit - Full Set. This comprehensive conversion kit is designed to enhance the performance and convenience of your vehicle. With high-quality wheel studs included, it ensures secure wheel mounting for added safety on the road. Upgrade your BMW E30 with this kit and enjoy the following benefits:

• Improved wheel mounting security
• Easier wheel installation and removal
• Prevents stripped lug bolts
• Durable construction for long-lasting performance

Wheel Stud Conversion Kit - Half Set: Enhance Your BMW's Performance

• Allows for easier and quicker wheel changes
• Provides a more secure and reliable wheel mounting solution
• Reduces the risk of stripped lug bolts
• Compatible with various BMW models

Upgrade the performance of your BMW with the Wheel Stud Conversion Kit - Half Set. This kit allows for easier and quicker wheel changes, providing a more secure and reliable wheel mounting solution compared to traditional lug bolts. With reduced risk of stripped lug bolts, you can enjoy peace of mind while driving your BMW. Plus, the kit is compatible with various BMW models, ensuring versatility and ease of installation.

BMW E3X Wheel Stud Conversion Kit - Half set

Enhance your BMW E3X's performance and safety with the BMW E3X Wheel Stud Conversion Kit - Half set. This kit allows for easy conversion from lug bolts to wheel studs, providing a more secure wheel mounting solution. Engineered for durability and reliability, it ensures optimal wheel alignment and reduces the risk of stud breakage. Upgrade your BMW E3X with this premium wheel stud conversion kit today.

• Easy conversion from lug bolts to wheel studs
• Provides a more secure wheel mounting solution
• Ensures optimal wheel alignment
• Reduces the risk of stud breakage for improved safety

Enhance your wheel changing experience with a stud conversion kit tailored for your BMW, designed to streamline and expedite the process. The kit comprises:

• Conical Seat Lug Nuts (10)
• 55mm Wheel Studs (10)

This conversion provides permanent wheel hangers, minimizing time and hassle. Simply screw in the provided studs for quick and easy installation.

Why Choose Wheel Studs Over Wheel Bolts?

• Added Confidence: Some racing regulations require wheel studs for improved wheel-to-hub contact, ensuring additional security.
• Versatility for Spacers: Wheel studs accommodate various spacer widths in one application, eliminating the need for custom bolt lengths with different spacer sizes.
• Ease of Installation: Wheel studs simplify the wheel installation process while the nuts secure the wheels in place.
• Reduced Wear: Wheel studs in the hub reduce wear on wheel hubs, compared to frequently removing and installing wheel bolts, enhancing longevity.
• Quick Tire Changes: Wheel studs facilitate swift and effortless tire changes or removal.

*Note: Apply thread-locking compound during installation and torque studs to 15Nm. These studs support spacers up to 10mm in size.*

Wheel Stud Conversion Kit - Full Set: Enhance Your BMW's Performance

• Allows for easier and quicker wheel changes
• Provides a more secure and reliable wheel mounting solution
• Reduces the risk of stripped lug bolts
• Compatible with various BMW models

Upgrade the performance of your BMW with the Wheel Stud Conversion Kit - Full Set. This comprehensive kit allows for easier and quicker wheel changes, providing a more secure and reliable wheel mounting solution compared to traditional lug bolts. With reduced risk of stripped lug bolts, you can enjoy peace of mind while driving your BMW. Plus, the kit is compatible with various BMW models, ensuring versatility and ease of installation.

For performance-driven enthusiasts seeking weight savings and premium quality, ECS Titanium Wheel Bolts are the ultimate choice. These bolts, designed for both BMW and MINI vehicles, offer a significant weight reduction of 50% compared to steel bolts of the same size. Crafted from annealed titanium alloy using CNC machining, these bolts ensure reduced rotational mass on the vehicle. Tested to meet class 10.9 fastener proof load requirements, they exhibit exceptional durability and resilience.

Product Benefits:

• 50% lighter than steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for high strength
• Tested to class 10.9 fastener proof load requirements for durability
• Conical seat design ensures proper fitment
• Ideal for performance-oriented enthusiasts seeking weight savings

*Note: When installing wheel spacers, add the size of the spacer to the length of the OE wheel bolt for proper fitment (ex. 26mm Length OE Wheel Bolt + 15mm Wheel Spacer = Requires a 41mm Length Bolt).

This carbon fiber strut brace uses a flat-oval design with a hinge-less mounting system that makes this one of the best strut braces on the market (especially at the price!). Cornering forces can put stress on the chassis, especially when used with stickier tires and stiffer suspensions.Strut braces help to reduce chassis flex by tying the two strut towers together. This design is stronger than most strut braces that use a hinge on the end that allows additonal flex. This design has fixed end mounts that the strut bar is bolted to. The slim oval tube is 100% carbon fiber for excellent strength and rigidty. The entire assembly is less than 5lbs and installs in minutes.

Fitment note: the end plates on this brace are closed. Some aftermarket front struts have an extra tall strut pin that will interfere with this brace.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

Elevate your E90's look with the BMW-crafted M Sport front bumper cover. This upgrade is expertly designed to add an aggressive edge to your vehicle, distinguishing it from the standard stock appearance.

The package includes:

• Front bumper cover
• Fog lamps
• Lower grilles
• Tow hook cover

Note: Fender liners and air ducts are not included in this set.

Introducing the BMW E90 M3 Style Front Bumper Conversion - BMW E90/91 325i/xi 328i/xi 330i/xi 335i/xi Pre-Facelift

A premium upgrade for your BMW E90 series vehicle, this front bumper conversion offers the aggressive styling of the M3 model, enhancing both the appearance and performance of your car. Specifically designed for BMW E90/91 325i/xi, 328i/xi, 330i/xi, and 335i/xi pre-facelift models, this conversion kit ensures a perfect fit and easy installation.

Elevate your driving experience with the following benefits:

• Transforms the look of your BMW E90 into the iconic M3 style
• Enhances aerodynamics for improved performance
• High-quality construction for durability and longevity

Upgrade your BMW E90 with this M3 style front bumper conversion and turn heads wherever you go.

Transform the look of your BMW with the BMW E90 E91 M3 Style Side Skirts. Designed to emulate the sleek and sporty appearance of the M3, these side skirts add a touch of style and aggression to your vehicle. Crafted from high-quality materials, they offer durability and a perfect fit for your BMW. Elevate your BMW's aesthetic appeal with these eye-catching M3 style side skirts.

• Emulates the sleek and sporty appearance of the M3
• Adds style and aggression to your BMW
• High-quality materials for durability
• Perfect fit for BMW E90 and E91 models

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Pair

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Pair are the perfect upgrade for those seeking the most attractive exhaust tips on the market. Exclusively offered by Turner Motorsport, these tips boast a sleek, matte titanium finish and a slant-cut, single-wall outlet that delivers a stunning visual appeal. Engineered for durability, they feature chrome-plated nuts, 304SS cap screws, and clamps.

Key Benefits:

• Stunning matte titanium finish
• Durable construction with 304SS cap screws and clamps
• Single-wall, slant-cut outlet for a sleek appearance
• Universal fitment for BMW and MINI vehicles
• Easy to install with basic modifications

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (4.5" Tip + 1.25" Clamping Surface)
• Outlet Size: 3.5"
• Outlet Style: Single Wall, Slant Cut

Modification may be required for proper fitment. This part is UNIVERSAL fitment, meaning not a direct fit to your vehicle. You must measure before ordering.

12x1.5 Conical Seat Wheel Nuts with 17mm Hex Head

ECS Tuning introduces 12x1.5 conical seat wheel nuts featuring a 17mm hex head, tailored for vehicles that have transitioned to a stud-style mounting system. These open-ended wheel nuts are the perfect solution for accommodating longer studs without any fitment concerns.

Product Details:

• Thread Size: 12x1.5
• Hex Head Size: 17mm
• Designed for vehicles with stud-style mounting
• Open-ended design to accommodate longer studs

27mm Thin Wrench

For those seeking a versatile tool for tight spaces, the 27mm Thin Wrench is an essential addition to any toolkit. This thin wrench is designed to tackle narrow areas with precision and ease, making it ideal for automotive and mechanical applications.

• Perfect for tight spaces and narrow areas
• Precision-engineered for optimal performance
• Durable construction ensures long-lasting reliability
• Versatile tool suitable for automotive and mechanical tasks

The N5X family of engines marked the start of a new era for BMW. The all-new aluminum block powerplants featured a host of technical upgrades, aiding in power output, reliability, and performance. Among these technological advances is an external electronic water pump, which removed load from the engine's accessory drive and allowed for advanced pulse-width-modulated (PWM) control.

From factory, the N52's electronic water pump is limited to a measly 200W output—strong enough for daily driving, but lacking in performance applications. Recognizing this shortcoming, ECS engineers set out to create a high-flow water pump upgrade that doesn't break the bank. Their high-quality adapter wiring harness and bracket allow you to install a 400W N54 water pump without any modification, an effortless, yet effective upgrade that doubles the output of the factory water pump!

By increasing coolant flow capacity, the 400W pump improves heat extraction from the cylinder head and engine block during high-load operation. This added thermal headroom is particularly beneficial for modified engines, sustained aggressive driving, track use, or operation in elevated ambient temperatures where the factory pump can operate near its limits. Improved circulation helps maintain more stable coolant temperatures and reduces the risk of localized hot spots.

Features & Benefits:

Upgrades to the more powerful 400W N54 water pump for increased coolant flow and improved engine cooling efficiency Sealed adaptor harness ensures secure connections and optimal operation under demanding conditions The N54 pump's higher power output offers longer-lasting, more effective cooling compared to the stock N52 pump Design:

40A fused power wire safely handles the increased power demands of the N54 pump, providing consistent and stable performance Sealed and robust construction, designed to withstand heat and moisture, ensuring reliability in even the most challenging environments Plug-and-play compatibility is designed for easy integration with the N52 engine and N54 water pump, minimizing installation time and complexity Kit Contents:

ECS N54 Water Pump Adapter Kit Conversion wiring harness Aluminum bracket Installation hardware Pierburg Full Aluminum Water Pump (11515A05704) Installation:

- Click HERE for Installation Instructions -

ECS Tuning proudly presents extended wheel bolts, available individually or matched with our spacers to ensure precise fitment. These bolts adhere to the stringent ISO 898 class 10.9 standards, guaranteeing exceptional mechanical and physical properties. Lab-tested to confirm class 10.9 compliance, they meet rigorous requirements for material properties, hardening, and proof load strength.

Bolt Specifications:

• Diameter: 12mm
• Thread Pitch: 1.5mm
• Length: 32mm

Note: For wheel spacer installation, add the spacer size to the OE wheel bolt's length for accurate fitment (e.g., 27mm Length OE Wheel Bolt + 15mm Wheel Spacer = Require a 42mm Length Bolt)