Create an account to be able to build Wish Lists.
The E9x M3 belly pan is a constant point of impact for parking curbs, inclines, and road debris. Fortunately, there is usually little damage other than the brittle belly pan plastic and side covers which is still not a cheap expense. The Turner Motorsport skid plate is the ultimate upgrade for your belly pan replacement woes, simply being the final replacement for nearly the same cost as the plastic OE replacement.
Turner made a decision to move forward with a black powder coat finish so the skid plate blends in close to the OE look and stays looking good under normal wear. Even though things look similar there are a lot of features taken into consideration when this was designed. The plates mount slightly higher offering even more ground clearance, so there is less chance of impact even though the this skid plate will provide all the strength you need to feel safe. Manufactured from 3/16" 5052 Aluminum at the center plate and 1/8" thick aluminum side plates fastened to the M3 with 1018 steel brackets that perfectly integrate with the factory liners and mounting points. When installing this skid plate there is zero modification required to mount this to your car making this upgrade completely reversible if desired.
All components are protected using wrinkle black powder coat finish to maintain a sleek appearance and protect against corrosion. Includes new stainless steel hardware.
Kit contents:
Help your BMW stand out from the crowd with our colored Roundel emblem covers. Whether you are looking to match your paint color, hightlight your interest in motorsports, or freshen the look of your car, Roundel decals offer a great way to personalize your BMW. These easy to install vinyl decals adhere over the existing Roundel emblems. The kit includes colored quadrants to cover the hood emblem, trunk emblem, steering wheel and 4 wheel emblems - and fender emblems for Z3 and Z4. These are made to withstand all weather conditions and are removed with ease if required.
In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly.
We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.
*For use with stock bumpers without the carbon fiber splitter upgrade.
This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly.
We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.
*For use with stock bumpers without the carbon fiber splitter upgrade.
This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly.
We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.
*For use with the carbon fiber splitter upgrade.
This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
These carbon fiber front lips are from the M3 Competition Package and are a direct fit to any standard E90 or E92 M3 front bumper. They add a little flair and definition to the front end. The stock front bumper can appear too high off the ground and these carbon lips make the car appear lower. These are factory BMW trim pieces so the car was designed to have them (not a tacked on afterthought). The ZCP and other special models represent the top of the M3 line which makes these a great addition to any 'standard' M3, including E90 sedan and E93 convertible models. They are also functional - channeling air under the car and into the undertrays for better cooling and aerodynamic efficiency. 
For the complete M3 carbon lip installation instructions, click here. 
Are you looking for that M3 look without the M3 expense? Turner Motosport has the solution for you. This M3 replica front bumper is manufactured to genuine specifications. Made from flexible ABS plastic, the fit and finish will have your car looking like a factory M3.Over the years, Turner Motorsport has been striving to create quality aftermarket parts for affordable prices. These parts have been manufactured to the highest standards and were tested in our factory, to ensure their performance and fitment. DonaEURtmt spend more money than you have to on your performance parts, get quality aftermarket replacement parts for a price that you can afford.Includes the following:
**Note: Fog lights will require sourcing and splicing in of 9006 connectors. Slight trimming or removal of the brake and oil cooler ducts will be necessary to install the E9X M3 style front bumper.**
