BMW 3 Series E93 (2007-2013)

Active Autowerke Performance Filter (Green Filter, Reusable With Clea...

T#:638561

Part#: AAAIRFE9XM

In Stock

5% off MSRP $ 119.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.00 USD

Add to Wish List

Qty

5% off MSRP

$ 119.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.00 USD

Add to Wish List

This allows your engine to breathe easily, making your powerplant more efficient. This filter utilizes two layers of tightly woven cotten fabric - cotton holds oil better, is thinner, and stronger.

Active Autowerke Signature Exhaust Muffler Generation 2 - E9x N52 325...

T#:397460

Part#: 11-021

In Stock

$ 721.99 USD

Add to Wish List

Qty

$ 721.99 USD

Add to Wish List

Optimal power, performance and sound are the core values of our Active Autowerke BMW 328i exhaust system, designed to fit BMW 325i, 328i, and 330i E9X N52 models. A free-flow design and beefy 80mm dual exhaust tips allow 35% to 40% more exhaust flow than the stock BMW 328i exhaust system. The increased flow minimizes back pressure, resulting in substantial HP and torque gains. The system’s Brushed stainless steel construction also makes a bold visual statement, while also increasing durability. Factory-fit specifications are followed closely, yet AA's system allows 14lbs in weight savings as opposed to the factory BMW exhaust. This exhaust features the Active Autowerke Muffler and Noise Cancellation Chamber to assist in reducing/eliminating drone. Manufactured from 100% brushed 304 stainless steel, this clamp-on system is suited for the N52 owner looking to bring their BMW's performance to new heights. NOTE: This exhaust may not easily fit some of the XI (4WD) and Station Wagon Models - welding may be required for proper fitment of the exhaust to stock pipe. Exhaust system requires cutting of the factory pipe for installation. Dimensions and cutting points are highlighted in the instructions. Some models have a round tubular pipe that makes the installation seamless. Other models have an oblong shape and will require welding instead of clamping. KEY FEATURES: Fits BMW 325i, 328i, 330i Full 304 stainless steel construction with brushed finish 3" Mandrel-bent piping for optimum exhaust flow Straight through muffler design NCC (Drone Reduction) Dual 80mm Active Autowerke Signature tips, staggered Weight Savings *14lbs lighter than stock BMW exhaust* Designed to use existing factory mounts and hardware Fully adjustable mounting positions Fully adjustable tips Illustrated instruction manual Two year warranty Fits all E9X vehicles with the N52 engine. Requires cutting and welding of the stock system for fitment. Includes instructions for installation process.

Show More Show Less

FTP Motorsport Low Temp Oil Thermostat - N54/N55

T#:582222

Part#: SG84006

Ships Today

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

This thermostat will open sooner and help to lower the overall oil temperature.

FTP Motorsport Oil Cooler Kit - N54/N55 w/ Factory Oil Cooler ...

For N54/N55 Engines w/ a factory oil cooler

T#:582171

Part#: SG840251007

Back Ordered

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

The turbocharged E9X 335i is renowned for its excellent performance and the ability to custom tune for more horsepower. Unfortunately, it is also known for oil cooling deficiencies that can reduce horsepower output and potentially compromise engine longevity, especially when driven enthusiastically or when boost is increased. To help maximize the power of your BMW, this FTP Motorsport kit adds a second oil cooler behind the kidney grills in addition to the factory oil cooler. This not only increases the cooling capacity, but more than DOUBLES it! Our kit provides the factory oil cooler with much more airflow then what is available in the fender wells. Only for vehicles with factory oil cooler

Show More Show Less

Active Autowerke N54 Blow Off Valve Kit - E82 135i, 1M, E9X 335i ...

T#:4416

Part#: AABOVKIT-N54

In Stock

$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

When adding boost to the N54 engine, it's important to consider effects throughout the rest of the system. Additional boost can overwhelm the stock BMW diverter valve system and lead to boost leakage, or boost spikes, and lost horsepower. With the factory components in place it's hard to maintain consistently high boost levels. Instead of the weak plastic components of the stock system, Active Autowerke uses a CNC-machined and mandrel-bent aluminum tube with a Venturi blow-off valve in place of the original diverter valves. The blow-off valve dumps overboost into the atmosphere for that distinctive turbo 'whoosh' sound. The single AA BOV is over-sized for the N54 application - taking the place of the two small diverter valves, and verified to handle over 600hp. With the BOV acting properly your turbos and other components are protected from compressor surge caused by excess pressure build-up.

We like the Active BOV better than other forms of diverter and BOV kits because it's tried and true - AA was the original turbo BMW tuners and their experience is second to none. That's why they took the time to engineer their kit to fit perfectly, using the OE-type connector to the throttle body, and high-strength silicone to the lower intercooler tube. Each connection is a tight, leak-free seal. The kit comes complete with the discharge tube, vacuum plugs for the stock hoses, and instructions. The tube is powdercoated in black and with a wrinkle finish for an OE appearance.

This item fits the following BMWs with N54 engine:
2008-2010 E82 BMW 135i 1M
2007-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2007-2010 E93 BMW 335i

Show More Show Less

Active Autowerke Power Pulley Kit - E9x M3

For vehicles with production date 2007-5/2008

T#:397285

Part#: 13-001

Ships in 3 Business Days

5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Qty

5% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.

Show More Show Less

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

T#:340366

Part#: N55CP-KIT

Ships in 3 Business Days

Starting at $ 189.99 USD

Add to Wish List

Starting at $ 189.99 USD

Add to Wish List

One major weak point in the N55 turbo plumbing is the stock upper chargepipe from the intercooler outlet to the intake manifold. The original N55 charge pipe is made from a weak plastic and can fail with even stock boost levels. The most common problem is a crack that develops along a seam where the pipe connects to the throttle body. Any crack here is bad as it creates a massive vacuum leak and the engine electronics will put the car into limp mode. If you don't want to be sidelined there is a very simple fix - the Active Autowerke N55 charge pipe.

This aluminum pipe is much stronger and more durable and nearly indestructable for the N55 application. It uses a CNC-machined factory-style connection and o-ring to the throttle body to ensure a tight and leak-free seal. The piping is a consistent 3" diameter for better flow and an improved throttle response. AA has included a raised boss with two ports should you choose to add a water/meth injection system later. The factory MAP sensor installs in the same location and the pipe is powdercoated black for a factory-type appearance.

With a stronger pipe you don't have to worry about the infamous chargepipe crack and lost boost levels and horsepower. All of the boost in the world is useless if it's leaking so using beefed up components in place of the weak factory pieces is the smart way to consistently high power output.

This item fits the following BMWs with the N55 engine:
2011-2012 E82 BMW 135i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i - Convertible

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

T#:388675

Part#: 340366TCKD4AMN6T

Ships in 3 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

Green Filter Cleaning Kit

T#:397308

Part#: 15-011

Ships in 3 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Includes Recharge Oil (8 oz.) and Cleaner Spray (12 oz.). The recharge oil traps the smallest dirt particles, ensuring your engine is breathing clean air. The oil creates a positive magnetic charge with the filter's stainless steel mesh. This positive charge attracts negatively charged dust particles entering the filter, clearing them off the cotton and allowing for maximum airflow. The oil also contains a swelling additive for the cotton filtration media - this allows filtration media to collect small dirt particles that could harm your engine.

Show More Show Less

Active Autowerke Supercharger Kit - E9X M3 2008-2013

T#:340094

Part#: AASC-E9XM3

Back Ordered

Starting at $ 9,995.00 USD

Add to Wish List

Starting at $ 9,995.00 USD

Add to Wish List

The advanced design and sleek features of the Active Autowerke Supercharger System include a front mount air-to-air intercooler system with a separate oil cooler for the supercharger unit's independent oil system. The Active Autowerke Supercharger Plenum replaces the factory air box and is designed to have an OEM-type look with custom finishes available at the customer's request. The Active Autowerke Supercharger Plenum has been designed with eight high-flow velocity stacks, and large three-inch intercooler piping to supply cooled air.

Show More Show Less

Active Autowerke Thermostat Bypass/Delete Tube - S65

T#:2302749

Part#: 14-016

Ships in 10 Business Days

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

CNC machined coolant/water thermostat bypass tube to improve flow on and off the track. Easy plug and play installation and a durable anodized coating make this a simple and reliable temperature control solution.

Show More Show Less

FTP Motorsport Throttle Body Spacer - E82/88 E9X N54 N55

T#:586847

Part#: SG71344

Special Order: No Guaranteed ETA

$ 100.00 USD

Add to Wish List

Qty

$ 100.00 USD

Add to Wish List

This is a billet aluminum throttle body spacer for your N54/N55 engine. Features: Increase MPG Improved throttle response No annoying whistle Increase in horsepower and torque High-quality billet aluminum construction

Show More Show Less

FTP Motorsport Boost Fitting - N20/N55

T#:582217

Part#: SG80036

Special Order: No Guaranteed ETA

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

If you are planning on running additional boost, keeping tabs on the level is going to be an important factor. For doing this you have many options...Apps, scanners, coding. But what about a good old mechanical gauge? Now you can add one the easy way with this sandwich plate adapter from FTP. Simply remove the factory boost sensor install the plate, re-bolt the boost sensor and you're done.

Show More Show Less

FTP Motorsport Charge Pipe - E9X E8X (N55)

T#:583183

Part#: SG71312

Special Order: No Guaranteed ETA

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. The FTP BMW N55 Charge Pipe both increases flow and improves the reliability of your twin turbo BMW. The 3" mandrel bent aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize flow into the engine. Increased Flow Direct OEM Replacement 3in Mandrel-Bent Aluminum Construction 4-Play Silicon Couplers

Show More Show Less

FTP Motorsport Lower Charge Pipe - E9X, E8X N54/N55

T#:582199

Part#: SG71414

Special Order: No Guaranteed ETA

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

This is a replacement boost pipe that is made from solid aluminum so it won't break, come loose or deteriorate over time. Connects intercooler to upper charge pipe. Features: Increased throttle response and decreases turbo lag Powder-coated black aluminum piping Throttle body matched 3 "piping Billet CNC OEM TB Flange for a leak-free connection Includes everything necessary to upgrade from the factory charge pipe

Show More Show Less

FTP Thermostat cover kit - N54 3.0L

T#:582056

Part#: SG84006-CT

Special Order: No Guaranteed ETA

$ 50.00 USD

Add to Wish List

Qty

$ 50.00 USD

Add to Wish List

This plate is a simple way to add a bespoke look to your engine bay. If you have replaced your oil thermostat or deleted your cooler, now is the perfect time for this mod. Installs in minutes and ensures a positive seal for the oiling system.

Show More Show Less

FTP Motorsport Dynamic Air scoop - E9X

T#:582223

Part#: SG71324

Special Order: No Guaranteed ETA

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Dynamic Air Scoops will increase the air volume that enters the engine thus providing a denser air charge. They help to guide the flow of air through the kidney grilles and directly into the airbox. Designed to be used with a complete intake assembly or with a factory airbox. Features: Lightweight and durable aluminum construction Meant to be used with or without an intake system Easy installation

Show More Show Less

FTP Motorsport Recirculating Blow Off Valve Kit - E82/88 E9X N54 ...

T#:582198

Part#: SG71393

Special Order: No Guaranteed ETA

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

This is a set of upgraded blow off valves for the N54 engine. The recirculating design uses OE DV design to ensure proper emissions and no engine lights. Features: Quicker responding boost with higher flowing valve Increase in horsepower and torque Eliminates boost spikes and leaks Overall accelerations improvements Capable of handling a wider range of boost pressure Easy bolt-on installation Made from CNC machined T6-6061 billet aluminum alloy Fully tunable for boost capacity and response

Show More Show Less

FTP Motorsport PCV Valve Upgraded Replacement - N54

T#:583063

Part#: SG84036

Special Order: No Guaranteed ETA

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

The OEM plastic PCV valve does not hold pressure well even when brand new. What this means is that when the turbochargers are making boost, pressurized air can become forced backwards through the valve and back into the crankcase. Depending on the condition of your PCV valve this can range from irritating to dangerous as a pressurized case can cause all sorts of issues. Additionally, if your valve cover is cracked due to age or has a bad gasket you are more than likely experiencing a pressure leak either internally or externally. These two features can cause even a low-mileage N54 to run like a tired elephant, sometimes even unlocking a special bonus function known as "Limp Mode". The solution is to replace any failed components and upgrade the PCV valve to something more capable withstanding the abuse of a turbocharged environment. FTP Motorsport has you covered with this solid aluminum valve assembly. It is essentially the same thing that came in your car from the factory, made out of aluminum. The internal components have also been made to fit tighter and outlast the life of an off the shelf replacement. No, this won't be the very last PCV valve you buy, but it will most certainly alleviate a lot of headaches common to N54 owners. And if you're tuned, big twin or single swapped you need one of these yesterday.

Show More Show Less

FTP Motorsport Boost Pipe - E9X E8X N55

T#:582436

Part#: SG71312-BP

Special Order: No Guaranteed ETA

$ 220.00

This product was last offered at the strikethrough price on
06-24-2026

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

Replace your failure prone factory BMW boost pipe with an FTP Motorsport aluminum piece. Stronger and more reliable than the OEM plastic piece that connects the intercooler to the turbo.

N55 N54 Low Oil Temp Thermostat Parts - Type 07

T#:594822

Part#: SG84006-07

Special Order: No Guaranteed ETA

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

FTP High Flow Air Filter - N55 E8x/E9x

T#:5788169

Part#: GN55

Special Order: No Guaranteed ETA

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

FTP air filters are made with a durable rubber, with optimum adhesion characteristics to ensure fitment to all shapes of boxes. These air filters are also created without welded joints creating a one piece air filter, increasing durability. Features: Reduced emissions and increased MPG Direct fitment Extends engine life Increased power and airflow

Show More Show Less

FTP Motorsport Charge Pipe Replacement C Clip/O-ring - N54/N55 ...

T#:586830

Part#: SG71312FG-9

Special Order: No Guaranteed ETA

$ 24.95 USD

Add to Wish List

Qty

$ 24.95 USD

Add to Wish List

Replacement Intake pipe C-clip and o-ring.

Active Autowerke Rotrex Traction Fluid - 1 Liter

T#:57616348

Part#: RTF-1L

Ships in 3 Business Days

7% off MSRP $ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD

Add to Wish List

Qty

7% off MSRP

$ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

Active Autowerke - S65 Power Pulley DPK Belt Kit - E9X M3

For vehicles with production date from 6/2008

T#:50934275

Part#: 13-001D

Ships in 3 Business Days

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

Free Up Real S65 Power — Engineered the Turner Way Your S65 is already making the power. This kit simply lets you keep more of it. The Active Autowerke Power Pulley Kit for the BMW E9X M3 reduces parasitic drag at the crankshaft, trimming rotational mass and freeing up horsepower that would otherwise be consumed by accessory drive load. The result is a measurable increase in rear-wheel output without sacrificing the balance, cooling capacity, or long-term durability expected from a properly engineered BMW upgrade. The crank pulley is CNC-machined from billet 6061 aluminum and finished with a hard-coat anodize for durability under sustained high-RPM operation. Unlike undersized pulleys that compromise system function, this design maintains proper operating characteristics while delivering real-world gains. Late-2007 production E9X M3 models transitioned to a double-sided (DPK) A/C belt configuration. Rather than forcing a workaround, Active Autowerke developed a proper DPK-compatible solution — including the correct matched belt. Applicable kits also include a spare DPK belt for added insurance. Dyno testing on a Mustang chassis dyno confirms gains of 10–12+ rear-wheel horsepower on an otherwise stock vehicle. Installation is fully reversible and requires no permanent modification. Product Highlights 10–12+ RWHP gain verified on stock S65 engines Complete bolt-on system CNC-machined 6061 billet aluminum crank pulley Hard-coat anodized finish for durability Includes correct replacement drive and A/C belts Spare DPK belt included where applicable Compatible with manual and DCT-equipped E9X M3 Reduces parasitic drag and rotational mass Designed to maintain proper operating temperatures Works in conjunction with Active Autowerke performance software Available for single-sided and double-sided (DPK) belt configurations Fitment Information Confirm whether your E9X M3 is equipped with a single-sided or double-sided (DPK) A/C belt prior to ordering to ensure correct application. A properly engineered solution for enthusiasts who want measurable gains while preserving OEM-level refinement and reliability.

Show More Show Less

Active Autowerke - S65 Gen2 Supercharger Kit (Level 2/ 640HP)- E9X M3...

T#:397304

Part#: 12-029

Ships in 10 Business Days

5% off MSRP $ 16,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15,436.99 USD

Add to Wish List

Qty

5% off MSRP

$ 16,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15,436.99 USD

Add to Wish List

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 640 horsepower and 413 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

Show More Show Less

Active Autowerke - S65 Gen2 Supercharger Kit (Level 3/ 700HP)- E9X M3...

T#:397305

Part#: 12-030

Ships in 10 Business Days

5% off MSRP $ 18,749.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17,811.99 USD

Add to Wish List

Qty

5% off MSRP

$ 18,749.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17,811.99 USD

Add to Wish List

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 700 horsepower and 480 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

Show More Show Less

Active Autowerke Supercharger Kit Gen 2 Level 4 - E9X M3 S65 4.0L ...

T#:57616347

Part#: 12-032-C38

Ships in 10 Business Days

$ 23,749.00 USD

Add to Wish List

Qty

$ 23,749.00 USD

Add to Wish List

The Active Autowerke Supercharger System is powered by a Rotrex C38-92R Supercharger Unit mounted with a custom CNCed bracket that uses a dedicated drive belt system, while eight high flow fuel injectors are used to supply the additional required fuel. Active Autowerke's Performance Software, available for 91-93 octane, race gas, and octane levels unique to other countries, is carefully calibrated, and is at the heart of the system to provide an unparalleled driving experience. Keeping within the factory's OBDII parameters, the Active Autowerke Supercharger System ensures consistency for everyday driving. The Level 4 system includes a water/methanol injection system with upgraded pulley and custom software.

Show More Show Less