BMW 3 Series E93 (2007-2013)

HJS Exhaust Pipe Hanger - E36, E39, E46, E90, E92, E93, Z4

T#:556847

Part#: 18201401797

In Stock

$ 45.99

This product was last offered at the strikethrough price on
08-19-2026

$ 24.64 USD

Add to Wish List

Qty

$ 24.64 USD

Add to Wish List

Rear muffler hanger

VRSF Replacement Downpipe Gaskets & Hardware

We Price Match - Give Us A Call or Chat!

T#:26038606

Part#: 509010

In Stock

$ 26.00 USD

Add to Wish List

Qty

$ 26.00 USD

Add to Wish List

Ensure a perfect seal for your BMW's OEM, VRSF, or aftermarket high flow downpipes with our high-quality Grade 12 installation hardware and gaskets. Each set includes 4 bolts, nuts, washers, and 2 stainless steel gaskets suitable for N54/N55 engines. Designed for years and models specified below, these components guarantee optimal performance and compatibility. Additionally, turbo to downpipe gaskets and clamps are available separately, along with midpipe gaskets for the S55 engine.

High-quality Grade 12 installation hardware and gaskets
Ensures a perfect seal for OEM, VRSF, or aftermarket downpipes
Suitable for N54/N55 engines
Compatible with specified BMW years and models
Turbo to downpipe gaskets and clamps available separately

Show More Show Less

VRSF OEM Replacement Charge Pipe C-Clip

We Price Match - Give Us A Call or Chat!

T#:585048

Part#: 504020

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Replacement C-Clip for OEM & Aftermarket Charge Pipes

VRSF Upper Chargepipe Upgrade Kit - N55

We Price Match - Give Us A Call or Chat!

T#:584877

Part#: 10901020A

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish. This piece also includes two plugged methanol bungs for those who use or plan to use methanol/water injection.

Show More Show Less

VRSF Performance HD Stepped Intercooler Upgrade Kit - 5" - N54/N55 ...

We Price Match - Give Us A Call or Chat!

T#:585062

Part#: 10903070

In Stock

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Get the most out of your N54 or N55 engine by replacing the factory intercooler with this Race intercooler kit from VRSF. This race intercooler will allow for more horsepower gains by reducing intake temperatures and preventing heat soak. With this intercooler you can expect a 2-3 degree temperature rise during a 3rd gear pull, compared to a 32 degree rise on a OEM intercooler.

Show More Show Less

VRSF Competition HD Intercooler Upgrade - 7.5" - N54/N55

We Price Match - Give Us A Call or Chat!

T#:585058

Part#: 10903040

In Stock

19% off MSRP $ 529.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 429.99 USD

Add to Wish List

Qty

19% off MSRP

$ 529.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 429.99 USD

Add to Wish List

Get the most out of your N54 or N55 engine by replacing the factory intercooler with this 7.5" Race intercooler kit from VRSF. This race intercooler will allow for more horsepower gains by reducing intake temperatures and preventing heat soak.

Show More Show Less

VRSF 2" OEM Location High Flow Silicone Inlet Kit - N54

We Price Match - Give Us A Call or Chat! 2" Inlets

T#:585222

Part#: 10901052

In Stock

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Improve your restrictive OEM intake with this 2" Relocated Silicone High Flow Inlet Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF OEM location inlet upgrade kit provides a more direct, high flowing intake path for your turbos. This kit includes everything you need to replace the OEM inlets, including relocation brackets, filters, hoses, and the steel wire reinforced silicon tubing.

Show More Show Less

VRSF Chargepipe Upgrade Kit - N54

We Price Match - Give Us A Call or Chat!

T#:584880

Part#: 10901020D

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish.

Show More Show Less

VRSF High Flow Aluminum Intake Inlet Kit - E8X/E9X N55

We Price Match - Give Us A Call or Chat!

T#:585195

Part#: 10901055

In Stock

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

This inlet will dramatically increase flow, especially when in mid to upper RPM range, as well as a more aggressive exhaust note.The VRSF inlet solution is unique in that it features a CNC'd aluminum flange that offers a larger overall inside diameter, increasing flow and decreases back pressure. This product is compatible with any OEM or after market intake and any upgraded turbo that is compatible with the OEM intake.

Show More Show Less

VRSF Stainless Steel Muffler Delete Polished Tips - E9X

We Price Match - Give Us A Call or Chat!

T#:585007

Part#: 10902050/03A-POL

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

A muffler delete upgrade can be one of the most cost effective exhaust modifications available. VRSF introduced their stainless steel muffler delete kit, reducing back pressure significantly, resulting in a faster turbo spool, increased power, and a deep, aggressive exhaust note. This muffler delete features 304 grade Stainless steel construction and mandrel bent, tig welded 2.5" piping.

Show More Show Less

VRSF 3" Stainless Steel Catted Downpipes - E8X/E9X N54

We Price Match - Give Us A Call or Chat!

T#:584894

Part#: 10902011

In Stock

$ 529.99 USD

Add to Wish List

Qty

$ 529.99 USD

Add to Wish List

3" Stainless Steel Downpipes with High Flow Catalytic Converter Reduce back-pressure by upgrading the restrictive catalytic converter in the factory downpipe to a high flow race cat. Expect an increase in power as well as a more aggressive exhaust tone. This downpipe is handcrafted from SS304 grade stainless steel with smooth radius bends to decrease turbulence and flow. Each kit includes heavy duty bolts, nuts, and washers along with two mid-pipe gaskets. VRSF offers high quality products at an exceptional value, including a lifetime warranty. Adds 20-25 HP to the wheels & 25-30 TQ to the wheels. CAD/CAM designed cast bell mouth for seamless flange to pipe transition. Hand made from mandrel bent, tig welded 3' 304 grade stainless steel. Smooth radius bends to decrease turbulence and increase flow. Fits LHD models with no modification necessary. Gaskets & high quality grade 12 mounting hardware included. VRSF Lifetime Warranty against defects and fitment.

Show More Show Less

Active Autowerke Performance Filter (Green Filter, Reusable With Clea...

T#:638561

Part#: AAAIRFE9XM

Ships in 1-2 days

5% off MSRP $ 119.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.00 USD

Add to Wish List

Qty

5% off MSRP

$ 119.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 113.00 USD

Add to Wish List

This allows your engine to breathe easily, making your powerplant more efficient. This filter utilizes two layers of tightly woven cotten fabric - cotton holds oil better, is thinner, and stronger.

VRSF 2" Aluminum Turbo Outlet Boost Pipe - V-Band - N54

We Price Match - Give Us A Call or Chat!

T#:584927

Part#: 10901030

In Stock

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

Does not include o-rings Decrease turbo lag and increase throttle response with a high-flow aluminum turbo outlet boost pipe. The OEM outlet has a limiting diameter of less than 1" which creates a significant bottleneck on the turbo. VRSF offers a 2" high flow outlet that replace the restrictive 1" OEM part, offering a significant increase in efficiency and overall output from the turbos. 2' outlets significantly increase throttle response and decreases turbo lag. Made from aircraft grade aluminum to ensure reliability. Fits every turbo and intercooler. Includes everything necessary to upgrade from factory boost pipe. Lifetime warranty.

Show More Show Less

BMW N54 N55 N63 S63 HJS V-Band Exhaust Clamp - Priced Each

T#:396285

Part#: 11657620508

In Stock

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

BMW N54 N55 N63 S63 HJS V-Band Exhaust Clamp - Priced Each is designed for superior performance and reliability in exhaust system maintenance and upgrades. Engineered by Turner Motorsport, this high-quality clamp ensures a secure and leak-free connection in your BMW's exhaust system.

Durable Construction: Made from premium materials to withstand high temperatures and harsh conditions, ensuring long-lasting performance.
Precision Fit: Designed to fit perfectly with BMW N54, N55, N63, and S63 engines, offering a secure and reliable seal.
Improved Exhaust Efficiency: Prevents leaks and maintains optimal exhaust flow, contributing to better engine performance and efficiency.
Easy Installation: The V-band design allows for quick and easy installation or removal, simplifying exhaust system maintenance.
Versatile Use: Ideal for both performance upgrades and routine repairs, making it a valuable addition to any BMW enthusiast's toolkit.

Show More Show Less

Exhaust Sleeve With Dual Clamps - Priced Each

T#:2423575

Part#: 1K0253141N

In Stock

18% off MSRP $ 34.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD

Add to Wish List

Qty

18% off MSRP

$ 34.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD

Add to Wish List

Commonly found between mid-pipe and front muffler. 60x95mm

VRSF Chargepipe Upgrade Kit - N54

We Price Match - Give Us A Call or Chat!

T#:584878

Part#: 10901020B

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish. This piece also includes two plugged methanol bungs for those who use or plan to use methanol/water injection.

Show More Show Less

VRSF Chargepipe Upgrade Kit - N54

We Price Match - Give Us A Call or Chat!

T#:584879

Part#: 10901020C

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish. This piece also includes two plugged methanol bungs for those who use or plan to use methanol/water injection.

Show More Show Less

VRSF 1.75" OEM Location High Flow Silicone Inlet Kit - N54

We Price Match - Give Us A Call or Chat! 1.75" Inlets

T#:585220

Part#: 10901050

In Stock

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Improve your restrictive OEM intake with this 1.75" Relocated Silicone High Flow Inlet Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF OEM location inlet upgrade kit provides a more direct, high flowing intake path for your turbos. This kit includes everything you need to replace the OEM inlets, including relocation brackets, filters, hoses, and the steel wire reinforced silicon tubing.

Show More Show Less

VRSF High Flow Catted Downpipe - E8x E9x N55

We Price Match - Give Us A Call or Chat!

T#:585057

Part#: 10902016

In Stock

$ 489.99 USD

Add to Wish List

Qty

$ 489.99 USD

Add to Wish List

3.5" Ceramic Coated Catted Downpipe

VRSF Performance Intake Air Filter Kit - N54

We Price Match - Give Us A Call or Chat!

T#:585223

Part#: 10901010

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Replace the restrictive factory filter system with the VRSF performance intake/air filter kit. The inverted S&B intake filters greatly increase flow in the mid to upper RPM range while introducing a more aggressive engine note. Gains of up to 20whp can be realized by replacing the restrictive factory intake with this bolt on kit. Everything needed for installation is included in this kit.

Show More Show Less

VRSF N55 Turbo Outlet Charge Pipe (TIC) E & F Chassis 10-17 BMW 135i/...

We Price Match - Give Us A Call or Chat!

T#:593732

Part#: 10901020E

Ships in 5 Business Days

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

This aluminum charge pipe by VRSF features a billet aluminum turbo connection and comes finished in a brushed aluminum. Replacing your plastic OEM inlet with this heavy duty, mandrel bent aluminum pipe offers a larger diameter pipe, increasing flow. Increase throttle response and decreases turbo lag. Brushed aluminum finish Billet CNC flanges for a leak free connection. Includes everything necessary to upgrade from factory charge pipe. Lifetime warranty. Does not include o-rings

Show More Show Less

Tire Valve For TPMS Systems

T#:641919

Part#: AUL1SENSOR

In Stock

Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

Qty

Sale - Save 29%

$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use

Active Autowerke Power Pulley Kit - E9x M3

For vehicles with production date 2007-5/2008

T#:397285

Part#: 13-001

Ships in 3 Business Days

5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Qty

5% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.

Show More Show Less

VRSF Outlet Charge Pipe Coupler for 10901030, 10901035, 10901040 & 10...

We Price Match - Give Us A Call or Chat!

T#:35154904

Part#: 205470

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

VRSF Outlet Charge Pipe Coupler for 10901030, 10901035, 10901040 & 10901045 is designed to ensure a secure, leak-free connection for turbocharged BMW engines. This premium coupler is crafted to fit seamlessly with VRSF outlet charge pipes, enhancing the reliability and performance of your BMW's turbo system. Made from high-quality materials, it withstands extreme boost pressures and temperatures, making it ideal for stock and high-performance applications. Available through Turner Motorsport, this coupler is a perfect upgrade for BMW enthusiasts seeking durability and optimal engine efficiency.

Benefits:

Provides a reliable, leak-free seal for VRSF charge pipes and turbo outlets
Engineered for compatibility with 10901030, 10901035, 10901040 & 10901045 charge pipes
Built with durable, heat-resistant materials to handle high boost pressures
Enhances turbo efficiency by eliminating boost leaks and ensuring consistent airflow
Precision-fit design allows for straightforward installation and optimal performance
Ideal for both stock and modified BMW turbocharged systems

The VRSF Outlet Charge Pipe Coupler for 10901030, 10901035, 10901040 & 10901045 is a must-have component for BMW owners aiming to maintain reliability and boost performance in their vehicle's turbocharging system.

Show More Show Less

BMC Performance Air Filter - E9X M3

For vehicles with production date up to 09/2009

T#:398690

Part#: FB577/08

In Stock at Vendor

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

>Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

VRSF Lower Charge Pipe Upgrade - E8X/E9X N45 N55

We Price Match - Give Us A Call or Chat! Designed to work with VRSF intercooler

T#:585210

Part#: 305450

In Stock

$ 72.99 USD

Add to Wish List

Qty

$ 72.99 USD

Add to Wish List

The OEM plastic lower charge pipe is very restrictive and prone to failure under stock boost levels. VRSF solves this issue with a 2.5" mandrel bent aluminum replacement that increases flow, and is much more reliable. This upgrade will improve the turbo spool of your N54 or N55 engine, and enables you to safely tune for more boost.

Show More Show Less

VRSF Relocated Silicone High Flow Inlet Intake Kit - E9X/E82 N54 ...

We Price Match - Give Us A Call or Chat!

T#:585030

Part#: 10901062

In Stock

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Replace your restrictive OEM intake with this 2" Relocated Silicone High Flow Inlet Intake Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF passenger side inlet upgrade kit relocates your coolant reservoir to the driver side while providing a more direct, high flowing intake path for your turbos.

Show More Show Less

VRSF Aluminum Oil Catch Can BMW N54

We Price Match - Give Us A Call or Chat!

T#:5788181

Part#: 205420

Ships in 7 Business Days

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

Keep your intake tract free of oil with our baffled aluminum oil catch can. N54 motors are prone to excessive blow by which causes the entire intake tract to gunk up with oil and directly contributes to issue where the intake valves get caked with burnt oil creating excessive carbon deposits. This can be prevented with the use of our properly designed oil catch can that was built specifically for the N54 motor to ensure you don’t suffer power loss as well as additional maintenance costs caused by excessive oil blow by. This catch can includes everything necessary for installation on your N54 BMW and takes less than 20-25 minutes to install. Each kit includes is powder coated in black and includes VRSF lifetime.

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

VRSF N54 Relocated Inlet Intake Filters Only (Pair)

We Price Match - Give Us A Call or Chat! VRSF Intake Required

T#:2423541

Part#: 409040

Ships in 10 Business Days

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

Replacement Air Filters for your VRSF Intake

VRSF Stainless T-Bolt Clamp Kit For VRSF Intercoolers

We Price Match - Give Us A Call or Chat!

T#:27138532

Part#: 305416

Back Ordered

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

VRSF Intercooler Install Kit - N54/N55

We Price Match - Give Us A Call or Chat!

T#:585071

Part#: 305410

In Stock

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

This kit includes the couplers, clamps, and mounting hardware neccesary to install any N54/N55 E-chassis VRSF intercooler.

Active Autowerke Signature Exhaust Muffler Generation 2 - E9x N52 325...

T#:397460

Part#: 11-021

Ships in 3 Business Days

$ 721.99 USD

Add to Wish List

Qty

$ 721.99 USD

Add to Wish List

Optimal power, performance and sound are the core values of our Active Autowerke BMW 328i exhaust system, designed to fit BMW 325i, 328i, and 330i E9X N52 models. A free-flow design and beefy 80mm dual exhaust tips allow 35% to 40% more exhaust flow than the stock BMW 328i exhaust system. The increased flow minimizes back pressure, resulting in substantial HP and torque gains. The system’s Brushed stainless steel construction also makes a bold visual statement, while also increasing durability. Factory-fit specifications are followed closely, yet AA's system allows 14lbs in weight savings as opposed to the factory BMW exhaust. This exhaust features the Active Autowerke Muffler and Noise Cancellation Chamber to assist in reducing/eliminating drone. Manufactured from 100% brushed 304 stainless steel, this clamp-on system is suited for the N52 owner looking to bring their BMW's performance to new heights. NOTE: This exhaust may not easily fit some of the XI (4WD) and Station Wagon Models - welding may be required for proper fitment of the exhaust to stock pipe. Exhaust system requires cutting of the factory pipe for installation. Dimensions and cutting points are highlighted in the instructions. Some models have a round tubular pipe that makes the installation seamless. Other models have an oblong shape and will require welding instead of clamping. KEY FEATURES: Fits BMW 325i, 328i, 330i Full 304 stainless steel construction with brushed finish 3" Mandrel-bent piping for optimum exhaust flow Straight through muffler design NCC (Drone Reduction) Dual 80mm Active Autowerke Signature tips, staggered Weight Savings *14lbs lighter than stock BMW exhaust* Designed to use existing factory mounts and hardware Fully adjustable mounting positions Fully adjustable tips Illustrated instruction manual Two year warranty Fits all E9X vehicles with the N52 engine. Requires cutting and welding of the stock system for fitment. Includes instructions for installation process.

Show More Show Less

Autel Universal Rubber TPMS Sensor - Set Of Four

T#:3529121

Part#: AUL1SENSORKT

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

VRSF 1000whp 7.5″ Stepped Race Intercooler - 7.5" - N54/N55 ...

We Price Match - Give Us A Call or Chat!

T#:585082

Part#: 10903050

In Stock

$ 579.99 USD

Add to Wish List

Qty

$ 579.99 USD

Add to Wish List

Get the most out of your N54 or N55 engine by replacing the factory intercooler with this 7.5" Race intercooler kit from VRSF. This race intercooler will allow for more horsepower gains by reducing intake temperatures and preventing heat soak.

Show More Show Less

VRSF Stainless Steel High Flow Inlet Intake Kit - N54

We Price Match - Give Us A Call or Chat!

T#:585033

Part#: 10901070

Ships in 2 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Replace your restrictive OEM intake with this High Flow Inlet Intake Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF inlet upgrade kit relocates your coolant reservoir & vacuum canisters to the driver side while providing a more direct, high flowing intake path for your turbos.

Show More Show Less

Active Autowerke Rotrex Traction Fluid - One Liter

T#:397307

Part#: 12-032

Ships in 3 Business Days

$ 240.00 USD

Add to Wish List

Qty

$ 240.00 USD

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

VRSF Relocated Silicone High Flow Inlet Intake Kit - E9X/E82 N54 ...

We Price Match - Give Us A Call or Chat!

T#:585194

Part#: 10901060

Ships in 2 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Replace your restrictive OEM intake with this 1.75" Relocated Silicone High Flow Inlet Intake Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF passenger side inlet upgrade kit relocates your coolant reservoir to the driver side while providing a more direct, high flowing intake path for your turbos.

Show More Show Less

BMC Performance Air Filter - E90, E91, E92, E93, E89, E60, E61 ...

T#:398689

Part#: FB494/20

In Stock at Vendor

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

T#:340366

Part#: N55CP-KIT

Ships in 3 Business Days

Starting at $ 189.99 USD

Add to Wish List

Starting at $ 189.99 USD

Add to Wish List

One major weak point in the N55 turbo plumbing is the stock upper chargepipe from the intercooler outlet to the intake manifold. The original N55 charge pipe is made from a weak plastic and can fail with even stock boost levels. The most common problem is a crack that develops along a seam where the pipe connects to the throttle body. Any crack here is bad as it creates a massive vacuum leak and the engine electronics will put the car into limp mode. If you don't want to be sidelined there is a very simple fix - the Active Autowerke N55 charge pipe.

This aluminum pipe is much stronger and more durable and nearly indestructable for the N55 application. It uses a CNC-machined factory-style connection and o-ring to the throttle body to ensure a tight and leak-free seal. The piping is a consistent 3" diameter for better flow and an improved throttle response. AA has included a raised boss with two ports should you choose to add a water/meth injection system later. The factory MAP sensor installs in the same location and the pipe is powdercoated black for a factory-type appearance.

With a stronger pipe you don't have to worry about the infamous chargepipe crack and lost boost levels and horsepower. All of the boost in the world is useless if it's leaking so using beefed up components in place of the weak factory pieces is the smart way to consistently high power output.

This item fits the following BMWs with the N55 engine:
2011-2012 E82 BMW 135i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i - Convertible

Show More Show Less

Active Autowerke N54 Blow Off Valve Kit - E82 135i, 1M, E9X 335i ...

T#:4416

Part#: AABOVKIT-N54

In Stock

$ 565.99 USD

Add to Wish List

Qty

$ 565.99 USD

Add to Wish List

When adding boost to the N54 engine, it's important to consider effects throughout the rest of the system. Additional boost can overwhelm the stock BMW diverter valve system and lead to boost leakage, or boost spikes, and lost horsepower. With the factory components in place it's hard to maintain consistently high boost levels. Instead of the weak plastic components of the stock system, Active Autowerke uses a CNC-machined and mandrel-bent aluminum tube with a Venturi blow-off valve in place of the original diverter valves. The blow-off valve dumps overboost into the atmosphere for that distinctive turbo 'whoosh' sound. The single AA BOV is over-sized for the N54 application - taking the place of the two small diverter valves, and verified to handle over 600hp. With the BOV acting properly your turbos and other components are protected from compressor surge caused by excess pressure build-up.

We like the Active BOV better than other forms of diverter and BOV kits because it's tried and true - AA was the original turbo BMW tuners and their experience is second to none. That's why they took the time to engineer their kit to fit perfectly, using the OE-type connector to the throttle body, and high-strength silicone to the lower intercooler tube. Each connection is a tight, leak-free seal. The kit comes complete with the discharge tube, vacuum plugs for the stock hoses, and instructions. The tube is powdercoated in black and with a wrinkle finish for an OE appearance.

This item fits the following BMWs with N54 engine:
2008-2010 E82 BMW 135i 1M
2007-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2007-2010 E93 BMW 335i

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Green Filter Cleaning Kit

T#:397308

Part#: 15-011

Ships in 3 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Includes Recharge Oil (8 oz.) and Cleaner Spray (12 oz.). The recharge oil traps the smallest dirt particles, ensuring your engine is breathing clean air. The oil creates a positive magnetic charge with the filter's stainless steel mesh. This positive charge attracts negatively charged dust particles entering the filter, clearing them off the cotton and allowing for maximum airflow. The oil also contains a swelling additive for the cotton filtration media - this allows filtration media to collect small dirt particles that could harm your engine.

Show More Show Less

VRSF Stainless Steel High Flow Inlet Intake Kit 2.00" - N54

We Price Match - Give Us A Call or Chat!

T#:585031

Part#: 10901072

Ships in 2 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Replace your restrictive OEM intake with this High Flow Inlet Intake Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF inlet upgrade kit relocates your coolant reservoir & vacuum canisters to the driver side while providing a more direct, high flowing intake path for your turbos.

Show More Show Less

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

T#:388675

Part#: 340366TCKD4AMN6T

Ships in 3 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

BMC Performance Air Filter - S65

T#:567651

Part#: FB536/08

In Stock at Vendor

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit. For vehicles with production date from 09/2009

Show More Show Less

BMC Performance Air Filter - E90, E91, E92, E93, E84

T#:398704

Part#: FB630/20

In Stock at Vendor

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

AutoLink AL529HD

T#:2914129

Part#: AL529HD

Ships in 6 Business Days

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Autel’s latest member of its code reader family of tools, the AL529HD can not only diagnose OBDII/EOBD-compatible vehicles but also heavy duty vehicles utilizing SAE-J1939 and SAE-J1708 protocols.

Active Autowerke Supercharger Kit - E9X M3 2008-2013

T#:340094

Part#: AASC-E9XM3

Ships in 10 Business Days

Starting at $ 9,995.00 USD

Add to Wish List

Starting at $ 9,995.00 USD

Add to Wish List

The advanced design and sleek features of the Active Autowerke Supercharger System include a front mount air-to-air intercooler system with a separate oil cooler for the supercharger unit's independent oil system. The Active Autowerke Supercharger Plenum replaces the factory air box and is designed to have an OEM-type look with custom finishes available at the customer's request. The Active Autowerke Supercharger Plenum has been designed with eight high-flow velocity stacks, and large three-inch intercooler piping to supply cooled air.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results