Staggered Performance Wheel Sets for BMW 3 Series E93 (2007-2013)

Elevate Your BMW's Look with Alzor Style 881 Wheels

Enhance your BMW's appearance and performance with the Alzor Style 881 wheels. These wheels boast a timeless split spoke mesh design that not only alters your vehicle's aesthetics but also turns heads wherever you go. Engineered for a seamless fit, these wheels bolt onto your BMW without any modifications required.

• Timeless split spoke mesh design for an eye-catching look
• Hassle-free bolt-on installation without modifications
• Silver painted finish with machined lips for added style
• TPMS compatibility for convenience
• VIA and JWL certified, ensuring outstanding quality, performance, and safety

Note for E46 Enthusiasts: Opt for 18x9.5 ET45 rear wheels if you aim to use wider rear tires than 18x9.5 ET35 allows.

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Silver with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling/pulling.

Specs:

• 19x8.5 ET32 - qty 2
• 19x9.5 ET32 - qty 2
• Diamond Silver with a diamond cut lip
• Center Bore: PFS
• Bolt Pattern: 5x120

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RG style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market. 

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Diamond Black painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling/pulling.

Specs:

• 18x8.5 ET38 - qty 2
• 19x9 ET45 - qty 2
• Diamond Black
• Center Bore: 72.5
• Bolt Pattern: 5x120

Styled after the legendary "Throwing Star" wheel design found on the E34 BMW M5, the Style 5011 from Alzor features a gloss-black center, a machined-finish lip, and a removable plastic cover in directional left- and right-side designs. The "Throwing Star" covers are securely held on by five socket-head hex bolts from the inside of each spoke to deter theft and prevent runaway covers.

This listing is for four wheel covers finished in grey. It includes replacement screws and center caps to ensure a comprehensive install.

Styled after the legendary "Throwing Star" wheel design found on the E34 BMW M5, the Style 5011 from Alzor features a gloss black center, a machined finished lip, and a removable plastic cover in directional left and right side designs. The "Throwing Star" covers are securely held on by five socket head hex bolts from the inside of each spoke to deter theft and prevent runaway covers.

This listing is for one replacement right side cover in grey.

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Brilliant Silver painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling/pulling.

Specs:

• 19x8.5 ET32 - qty 2
• 19x9.5 ET35 - qty 2
• Brilliant Silver
• Center Bore: PFS
• Bolt Pattern: 5x120