BMW Suspension Parts for BMW 3 Series E93 (2007-2013)

Upgrade your E9X BMW with this all-in-one Turner Motorsport bundle featuring Fixed Camber Plates and Monoball Front Thrust Arms. Designed to improve handling, reduce deflection, and increase steering precision, this package delivers a noticeable performance boost both on the street and track—all without breaking the bank.

E9X Front Camber Plates – Fixed Position

Most BMWs leave the factory with conservative front camber to encourage understeer, which compromises handling and accelerates tire wear by reducing contact patch engagement. Turner Motorsport’s Fixed Camber Plates are a simple, effective solution, adding up to 2.5° of negative camber to your E90, E92, or E93.

By increasing front negative camber, you’ll enjoy:

Improved turn-in and cornering confidence

Reduced tire wear

Better overall handling balance

Designed with expertise gained from Turner Motorsport’s participation in the Speed World Challenge series, these plates are offset for the optimal camber/caster combination when running stock-diameter springs. They add only ~6mm of ride height and utilize the factory upper strut mount for a clean, straightforward installation—perfect for racing classes where adjustable camber plates are restricted, or for enthusiasts who want a simple, cost-effective negative camber upgrade.

Installation: Press out OEM studs and alignment pin; see Turner’s detailed PDF for guidance.

Monoball Front Thrust Arm Upgrade Kit

BMW’s stock front thrust arm bushings are soft, compliant, and prone to wear—allowing fore/aft wheel movement that degrades steering feel, alignment, braking response, and tire performance. While designed for comfort, these OEM components fall short for enthusiasts and track-focused drivers seeking maximum control.

Turner Motorsport’s Monoball Front Thrust Arms solve these issues with:

Sealed OEM BMW ball joints for exceptional durability

CNC-machined 6061-T6 anodized aluminum bearing assembly with knurled OD for perfect press-fit and long life

Low-friction, no-bind design to eliminate unwanted suspension deflection

The result? Instantaneous turn-in, precise steering, direct braking feedback, and exceptional suspension feel, all while maintaining comfort and reliability for daily driving. Perfect for track use or spirited street driving, these thrust arms are a no-compromise upgrade for anyone looking to enhance BMW front-end performance.

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B4 OE Replacement struts and 2 rear Bilstein B4 OE Replacement shocks. Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!

This item fits the following BMWs:
2007-2013 E91 BMW 328i with Sport Suspension

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

• Compatible with Air Lift 3H and 3P management systems
• Powers a single compressor
• Ensures seamless functionality
• Necessary for dual compressor setup

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

This item fits the following BMWs: 

E82/88 BMW 128i 135i

E90/92 BMW 325i 328i 328i xDrive 330i 335i