BMW Brakes & Brake Parts for BMW 3 Series E93 (2007-2013)

BRAKE CALIPER PISTON TOOL SET:

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.

Made of 100 percent chromalloy steel for strength, durability, and long service life.

PROTECTA SOCKET SET:

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

CALIPER HOOK SET:

• Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Brake services are now easier and more comfortable with this limited-time Doorbuster package! Featuring the Schwaben Mechanic's Folding Ground Pad and 3-Liter European Pressure Brake Bleeder, this package allows you to easily bleed your brakes by yourself without having to hurt your knees or back.

SCHWABEN MECHANIC'S FOLDING GROUND PAD
Make your favorite spot the most comfortable. The hard pavement can be brutal when spending time under your car, make more comfortable so there's no rushing when getting the job done.

Features:

•  Resists oils and fluids.
•  High density foam.
• Folded size is 17"W x 28"L. Unfolded is 17"W x 47"L
• Pad is apx 1-1/2" thick. Headrest is apx 3" thick

SCHWABEN 3-LITER EUROPEAN PRESSURE BRAKE BLEEDER
We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

BMW E9X E84 Front And Rear Brake Pad Kit - Hawk HPS provides advanced braking characteristics to give your vehicle optimum stopping power. This unique compound combines the safety and quality of aerospace design with the braking technology of motorsports.

• Delivers superior stopping power for enhanced safety and performance.
• Utilizes advanced aerospace materials for durability and reliability.
• Suitable for both street and track use with reduced dust and quieter performance.
• Improves brake torque while being gentle on rotors.

Not sure which Hawk performance brake pad is right for your needs? Consult the "Hawk Brake Pad Compounds" graph for an illustration of braking temperatures versus coefficient of friction. A brake pad from the right of the graph such as DTC-50, DTC-60, or DTC-70 will provide aggressive stopping power for the track, but may n

Fitment: FRONT
Caliper: 4-piston monobloc
Caliper color: black, red, silver
Rotors: 365x29mm, 2-piece, cross-drilled or slotted

With Brembo Big Brakes you will get maximum braking force thanks to their rigid mounting and greater stopping performance thanks to the larger rotors and better heat dissipation. Gran Turismo brake kits come with a high-performance brake pad as standard. This kit requires 18" wheels (click here for wheel clearance specs). Choose the caliper color and the rotor style that you would like below.
Best Price Guaranteed! If you find this kit listed elsewhere for less, let us know by phone or email and we'll match or beat the competition.

This item fits the following BMWs:
2006+ E90 BMW 325i 328i 330i - Not for Xi - all wheel drive models
2007+ E92 BMW 328i - Not for Xi - all wheel drive models
2007+ E93 BMW 328i

Caliper: 6-pistonmonoblock
Caliper color: black (standard), red, silver
Rotors: 380x32mm, 2-piece, cross-drilled or slotted

With Brembo Big Brakes you will get maximum braking force thanks to theirrigid mounting and greater stopping performance thanks to the larger rotors andbetter heat dissipation. Gran Turismo brake kits come with a high-performancebrake pad as standard. This kit requires 19" wheels (click here for wheel clearance diagram). Choose the caliper color and the rotor style that youwould like below.

Best Price Guaranteed! If you find this kit listed elsewhere for less, let us know by phone or email and we'll match or beat the competition.

Caliper: 4-pistonLotus monobloc
Caliper color: black (standard), red, silver
Rotors: 380x28mm, 2-piece, cross-drilled or slotted

With Brembo Big Brakes you will get maximum braking force thanks to theirrigid mounting and greater stopping performance thanks to the larger rotors andbetter heat dissipation. Gran Turismo brake kits come with a high-performancebrake pad as standard. This kit requires 19" wheels - including the stock 19" wheels if a small spacer is used (click here for wheel clearance specs). Choose the caliper color and the rotor style that youwould like below.

Best Price Guaranteed! If you find this kit listed elsewhere for less, let us know by phone or email and we'll match or beat the competition.

This item fits the following BMWs:
2008+ E90 BMW M3 Sedan
2008+ E92 BMW M3 Coupe
2008+ E93 BMW M3 Convertible