BMW Engine Parts for BMW 3 Series E93 (2007-2013)

E9X M3 Performance Underdrive Pulley Kit

For vehicles with a production date from 05/2008+ & a counterclockwise rotating Power S...

T#:593749

Part#: 10.00.011

Ships in 5 Business Days

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation

Show More Show Less

Slon Workshop E9X M3 (S65) Vanos Covers Kit

T#:35053681

Part#: SLON-E9XM-5VCK

In Stock

$ 390.00 USD

Add to Wish List

Qty

$ 390.00 USD

Add to Wish List

Enhance the durability of your BMW E9X M3 (S65) engine with the Slon Workshop Vanos Covers Kit. The OE plastic vanos cover is known for cracking and failure, posing a risk of plastic debris in the engine. Replace it with the IND Slon upgraded vanos covers for added peace of mind, preventing potential issues and ensuring the longevity of your engine.

Vanos Covers Kit for BMW E9X M3 (S65)
Upgraded design for enhanced durability
Prevents cracking and failure of the OE plastic vanos cover
Reduces the risk of plastic debris in the engine
Provides an extra level of peace of mind for engine safety

Show More Show Less

Automatic Transmission Oil Pan With Transmission Filter - BMW E9X E82...

For Vehicles Equipped with a ZF GA6HP19Z Automatic Transmission.

10X Entries Into Our F80 M3 Sweepstakes

T#:640488

Part#: 24117571217

In Stock

Sale - Save 13% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

Qty

Sale - Save 13%

$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

GA6HP19Z Automatic Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This filter fits GA6HP19Z automatic transmissions. This will NOT fit the GA6L45R transmission. Please check your transmission to ensure it is the correct type. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Radium Engineering Catch can kit - E9X 335i E8X 135i

T#:577808

Part#: 20-0373

In Stock

$ 259.99 USD

Add to Wish List

Qty

$ 259.99 USD

Add to Wish List

Oil catch cans prevent elevated oil blow by caused by aggressive driving. The Radium Engineering catch can uses a closed loop system and is emissions and track legal, and by not venting to atmosphere avoids any oil smells from getting into the cabin. Kit includes Billet catch can Mounting bracket 10AN hose fittings and adapters 5/8" PCV hose Mounting hardware

Show More Show Less

Rogue Engineering Power Pulley Set - E9X M3 (05/2008+)

T#:553839

Part#: PP.S65.V8.B

Ships in 6 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Ch...

T#:589404

Part#: N54-PORTINJCONMO

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more.

Show More Show Less

Stage 1 Low Pressure Fuel Pump Complete Inline Upgrade

T#:403509

Part#: BMW-S1LPFP-CK

Ships in 1 Business Day

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

This is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP.

Multi-Pump Fuel Surge Tank (MPFST)

T#:31059457

Part#: 20-1440

In Stock at Vendor

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

Bremmen Engine Oil Pan - E82/88 E9X Z4 RWD (N54/55 3.0L)

10X Entries Into Our F80 M3 Sweepstakes
For RWD models only!

T#:2393341

Part#: 11137570400

In Stock

Sale - Save 15% $ 312.99

This product was last offered at the strikethrough price on
09-16-2026

$ 266.04 USD

Add to Wish List

Qty

Sale - Save 15%

$ 312.99

This product was last offered at the strikethrough price on
09-16-2026

$ 266.04 USD

Add to Wish List

When your oil pan has suffered damage due to road debris or the vehicle making contact with the road surface, immediate replacement is crucial. This preventative action ensures that any potential cracks or leaks, which could ultimately result in catastrophic engine failure, are averted. Don't wait – safeguard your engine's integrity with a prompt oil pan replacement.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Bucketless - N54/55 E-Series ...

T#:403280

Part#: FILPFPK4

Ships in 2 Business Days

Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD

Add to Wish List

Sale - Save 3%

$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD

Add to Wish List

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol.

The Stage 2 bucketless kit includes the following:

- A custom anodized billet fitting for the pump output and stock fuel line connection.
- Our custom billet aluminum anodized bracket for the pump and float assembly
- Two cotter pins to secure your float assembly
- A new E85 compatible Walbro 450 pump
- Spare vent tube clip
- A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

- A complete plug and play solution by simply adding the secondary module
- Our custom billet aluminum fitting to run both pumps in parallel
- A new E85 compatible Walbro 450 pump
- Wiring harness for the secondary pump
- Spare vent tube clip
- A new Walbro filter

Recommended accessories:
- Lock Ring Removal Tool
- Hobb's switch
NOTE: These kits include a basic filter assembly. When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump. In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns. Again for those applications we'd recommend one of our standard pump applications.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 1 - N54/55 E-Series ...

T#:403249

Part#: FILPFPK1

Ships in 1 Business Day

Starting at $ 199.99 USD

Add to Wish List

Starting at $ 199.99 USD

Add to Wish List

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP). They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

SAE J30R10 E85 compatible fuel line
14ga fuel resistant wiring harness
Quick connect female bullet connectors (2)
Vent tube replacement clip
Nylon cable ties (10)
Stainless steel lock nuts (2)
10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
Pushlock pump retention fittings (2)
14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)
*Note: Walbro does not warranty this pump for E85 use. If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.
** IMPORTANT: Do NOT attempt to run this kit inline with a Stage 2 kit. The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Show More Show Less

E9X/E8X Bucketed Fuel Pump Upgrade - Single Shot

T#:590135

Part#: E90BUCKETSTKSS

Ships in 10 Business Days

$ 551.99 USD

Add to Wish List

Qty

$ 551.99 USD

Add to Wish List

Rogue Engineering Power Pulley Set - E9X M3 (up to 05/2008)

For vehicles with a production date up to 05/2008 with single drive belt.

T#:553840

Part#: PP.S65.V8.A

Ships in 8 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

HARD Motorsport BMW Oil Cooler Fitting Adapter Plate - E36 E46 E82 E9...

T#:593621

Part#: OILADPTR

Special Order: No Guaranteed ETA

$ 62.00 USD

Add to Wish List

Qty

$ 62.00 USD

Add to Wish List

The HARD Motorsport Oil Cooler Fitting Adaptor Plate allows you to upgrade your oil cooler lines to a flexible braided hose that can be routed in any direction, giving the ability to upgrade or relocate your oil cooler. This kit replaces the oil cooler hard lines with two -10 AN fittings, mounting bracket, O-rings, and adaptor bracket, which is CNC machined stainless steel.

Show More Show Less

Radium Engineering Fuel Surge Tank Kit - E9X Non M

T#:577879

Part#: 20-0470

Back Ordered

Starting at $ 599.99 USD

Add to Wish List

Starting at $ 599.99 USD

Add to Wish List

Designed to prevent fuel starvation by acting as a reserve tank to keep fuel flowing in the case of the main tank sump running dry, during hard acceleration or turning for example. The BMW fuel surge tank install kit includes all needed brackets and hoses for a complete installation. This surge tank kit installs in place of the factory filter and fuel pressure regulator located in the fuel tank for a easy installation, the factory fuel pump is still in place and acts in tandem with the surge tank pumps by maintaining fuel level in the surge tank.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N54/55 E-Series ...

T#:403273

Part#: FILPFPK2

Back Ordered

Sale - Save 2% $ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

Sale - Save 2%

$ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping

Show More Show Less

N54 Dual Bucketless Fuel Pump Upgrade - "External Series"

T#:590122

Part#: PFS-E9X-BCKTLSSE

Back Ordered

$ 609.99 USD

Add to Wish List

Qty

$ 609.99 USD

Add to Wish List

Looking to make 700WHP+ on your N54 powered vehicle, need the fuel to do to so, and don’t want to spend a ton of money? Look no further than the PFS bucketless fuel “External Series” pump upgrade! The external series takes our already best on the market bucketless design and adds a 3/8 Quick Disconnect bulkhead fitting to the top hat which allows you to run the secondary pump independent of the factory lines. This allows FULL FLOW from the second pump unhindered by the factory jet pump, siphon, fuel filter, or Fuel pressure regulator. All PFS “External Series” Bucketless pumps include the following: A complete plug and play solution by simply getting rid of your factory bucket Two New E85 compatible Walbro 450 F9000274 pumps Two new Walbro filters (Hydra-Mat available in options) Wiring Harness for the secondary pump with Fused power Hobbs Switch Fuel pump relay 3/8 QD fitting on the Passenger side top hat -6 Fuel line from Passenger side tank to the front of the vehicle -6 Fuel line from Driver side tank to the front of the vehicle PFS 10 micron filter with choice of outlet fittings Flow testing on the PFS test bench prior to shipping

Show More Show Less

Vargas Planetary OverDrive HPFP Upgrade - BMW N54

T#:51778140

Part#: PFS-POD-HPFP-UPG

Ships in 10 Business Days

$ 1,154.99 USD

Add to Wish List

Qty

$ 1,154.99 USD

Add to Wish List

This Planetary OverDrive system allows you to stick with your factory BMW high-pressure fuel pump while unlocking the flow needed for big-turbo builds.

24-270X Accusump Pro Electric Valve Kit

T#:590562

Part#: 24-270X

Ships on Oct 29, 2026

17% off MSRP $ 297.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.00 USD

Add to Wish List

Qty

17% off MSRP

$ 297.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.00 USD

Add to Wish List

E9X/E8X Bucketed Fuel Pump Upgrade - Double Shot

T#:590134

Part#: E90BUCKETSTKDS

Back Ordered

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 3 Series E93 (2007-2013)

Sub-Categories

E9X M3 Performance Underdrive Pulley Kit

Slon Workshop E9X M3 (S65) Vanos Covers Kit

Automatic Transmission Oil Pan With Transmission Filter - BMW E9X E82...

Radium Engineering Catch can kit - E9X 335i E8X 135i

Rogue Engineering Power Pulley Set - E9X M3 (05/2008+)

Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Ch...

Stage 1 Low Pressure Fuel Pump Complete Inline Upgrade

Multi-Pump Fuel Surge Tank (MPFST)

Bremmen Engine Oil Pan - E82/88 E9X Z4 RWD (N54/55 3.0L)

Fuel-It! Low Pressure Fuel Pump Upgrade Bucketless - N54/55 E-Series ...

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 1 - N54/55 E-Series ...

E9X/E8X Bucketed Fuel Pump Upgrade - Single Shot

Rogue Engineering Power Pulley Set - E9X M3 (up to 05/2008)

HARD Motorsport BMW Oil Cooler Fitting Adapter Plate - E36 E46 E82 E9...

Radium Engineering Fuel Surge Tank Kit - E9X Non M

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N54/55 E-Series ...

N54 Dual Bucketless Fuel Pump Upgrade - "External Series"

Vargas Planetary OverDrive HPFP Upgrade - BMW N54

24-270X Accusump Pro Electric Valve Kit

E9X/E8X Bucketed Fuel Pump Upgrade - Double Shot

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results