BMW Engine Parts for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

OMP - Corporate Logo
T#:1614
Part#: EA-462
Back Ordered
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less
Rogue Engineering - Corporate Logo
T#:553839
Part#: PP.S65.V8.B
Ships in 6 Business Days
$ 295.00 USD
Free Shipping
$ 295.00 USD
Free Shipping
Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.
Show More Show Less
FTP Motorsport - Corporate Logo
T#:582171
Part#: SG840251007
Back Ordered
$ 349.99 USD
Free Shipping
$ 349.99 USD
Free Shipping
The turbocharged E9X 335i is renowned for its excellent performance and the ability to custom tune for more horsepower. Unfortunately, it is also known for oil cooling deficiencies that can reduce horsepower output and potentially compromise engine longevity, especially when driven enthusiastically or when boost is increased. To help maximize the power of your BMW, this FTP Motorsport kit adds a second oil cooler behind the kidney grills in addition to the factory oil cooler. This not only increases the cooling capacity, but more than DOUBLES it! Our kit provides the factory oil cooler with much more airflow then what is available in the fender wells. Only for vehicles with factory oil cooler
Show More Show Less

Active Autowerke Power Pulley Kit - E9x M3
For vehicles with production date 2007-5/2008
Active Autowerke - Corporate Logo
T#:397285
Part#: 13-001
Ships in 3 Business Days
5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
5% off MSRP
$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.
Show More Show Less

Rogue Engineering Power Pulley Set - E9X M3 (up to 05/2008)
For vehicles with a production date up to 05/2008 with single drive belt.
Rogue Engineering - Corporate Logo
T#:553840
Part#: PP.S65.V8.A
Ships in 8 Business Days
$ 295.00 USD
Free Shipping
$ 295.00 USD
Free Shipping
Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.
Show More Show Less
Schrick - Corporate Logo
T#:2474
Part#: TMS2474
Ships on Feb 1, 2027
$ 6,478.60 USD
Free Shipping
$ 6,478.60 USD
Free Shipping
This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 284 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.
Show More Show Less

Schrick - Corporate Logo
T#:2500
Part#: TMS2500
Ships on Feb 1, 2027
$ 6,478.60 USD
Free Shipping
$ 6,478.60 USD
Free Shipping
This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 292 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.
Show More Show Less
Rear Bank 2 Post-Cat Oxygen Sensor - 490mm - E70 E83 E82/88 E9X (N5X ...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:4934915
Part#: 3148030031
Ships on Nov 3, 2026
$ 112.99 USD
Free Shipping
$ 112.99 USD
Free Shipping
The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. This oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 490mm bank 2 oxygen sensor is mounted after the catalytic converter.
Show More Show Less

FTP Motorsport - Corporate Logo
T#:583063
Part#: SG84036
Special Order: No Guaranteed ETA
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
The OEM plastic PCV valve does not hold pressure well even when brand new. What this means is that when the turbochargers are making boost, pressurized air can become forced backwards through the valve and back into the crankcase. Depending on the condition of your PCV valve this can range from irritating to dangerous as a pressurized case can cause all sorts of issues. Additionally, if your valve cover is cracked due to age or has a bad gasket you are more than likely experiencing a pressure leak either internally or externally. These two features can cause even a low-mileage N54 to run like a tired elephant, sometimes even unlocking a special bonus function known as "Limp Mode". The solution is to replace any failed components and upgrade the PCV valve to something more capable withstanding the abuse of a turbocharged environment. FTP Motorsport has you covered with this solid aluminum valve assembly. It is essentially the same thing that came in your car from the factory, made out of aluminum. The internal components have also been made to fit tighter and outlast the life of an off the shelf replacement. No, this won't be the very last PCV valve you buy, but it will most certainly alleviate a lot of headaches common to N54 owners. And if you're tuned, big twin or single swapped you need one of these yesterday.
Show More Show Less

Active Autowerke - Corporate Logo
T#:57616348
Part#: RTF-1L
Ships in 3 Business Days
New Item
7% off MSRP $ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD
Free Shipping
7% off MSRP
$ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).
Show More Show Less
Active Autowerke - Corporate Logo
T#:57616347
Part#: 12-032-C38
Ships in 10 Business Days
New Item
$ 23,749.00 USD
Free Shipping
$ 23,749.00 USD
Free Shipping
The Active Autowerke Supercharger System is powered by a Rotrex C38-92R Supercharger Unit mounted with a custom CNCed bracket that uses a dedicated drive belt system, while eight high flow fuel injectors are used to supply the additional required fuel. Active Autowerke's Performance Software, available for 91-93 octane, race gas, and octane levels unique to other countries, is carefully calibrated, and is at the heart of the system to provide an unparalleled driving experience. Keeping within the factory's OBDII parameters, the Active Autowerke Supercharger System ensures consistency for everyday driving. The Level 4 system includes a water/methanol injection system with upgraded pulley and custom software.
Show More Show Less
Active Autowerke - Corporate Logo
T#:397305
Part#: 12-030
Ships in 10 Business Days
5% off MSRP $ 18,749.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17,811.99 USD
Free Shipping
5% off MSRP
$ 18,749.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17,811.99 USD
Free Shipping
Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 700 horsepower and 480 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.
Show More Show Less


Active Autowerke - Corporate Logo
T#:397304
Part#: 12-029
Ships in 10 Business Days
5% off MSRP $ 16,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15,436.99 USD
Free Shipping
5% off MSRP
$ 16,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15,436.99 USD
Free Shipping
Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 640 horsepower and 413 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.
Show More Show Less