BMW Engine Parts for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Vitesco Technologies - Corporate Logo
T#:30629652
Part#: 13538616079
In Stock
11% off MSRP $ 560.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 499.99 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 560.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 499.99 USD
Free Shipping on orders $49 and up
If you are experiencing a rough idle, misfire, or check engine light, this could be the problem. Earlier fuel injectors for the N54 have been a common failure item, this is the most up to date injector for the N54 engine. It is highly recommended to replace older injectors also if your car is modified or you plan to modify it. Important information to consider when replacing injectors: It is recommended to replace at least 3 injectors at a time, replacing all injectors in a cylinder bank, instead of mixing and matching. If ALL injectors in a bank are index 11 or greater, injectors may be replaced individually with a new injector. If your stock injectors are index 10 or less, all 3 injectors per bank must be replaced. For V8s, all four in that bank must be replaced. Vehicles with old injector 7585261 will need to inspect their existing injectors to determine if these can be replaced individually. Replacement also requires 13537564751 for each injector.
Show More Show Less
Elring Valve Cover Gasket Set - N55 3.0L, S55
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:399889
Part#: 11127587804
In Stock
$ 31.79 USD
Free Shipping on orders $49 and up
If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.
Show More Show Less
OEM Elring Oil Pan Gasket - E9X M3 S65
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:390411
Part#: 11137841085
In Stock
$ 43.99 USD
Free Shipping on orders $49 and up
If oil is leaking from the seal at the oil pan and block, you will need a new oil pan gasket. It is also wise to change this any time you have to pull the oil pan gasket.

Burger Motorsports - Corporate Logo
T#:38587650
Part#: N54PCVVR
In Stock
$ 40.00 USD
Free Shipping on orders $49 and up
The BMS N54 Upgraded Replacement PCV Valve is a high-performance upgrade designed to enhance crankcase ventilation and minimize excessive blow-by in BMW N54 engines. Unlike the stock PCV valve, which can degrade over time and lead to oil consumption or boost leaks, this upgraded version provides superior sealing and long-term durability. ### Key Features: - **Direct-Fit Replacement** – Designed for an exact fit, ensuring hassle-free installation. - **Optimized Ventilation** – Improves crankcase pressure management, reducing oil blow-by and deposits. - **Enhanced Durability** – Constructed from premium materials to withstand high-boost applications and prolonged use. - **Boost Leak Prevention** – Delivers a tighter seal than the factory valve, preventing power loss. - **Ideal for Tuned Engines** – A critical upgrade for N54-powered vehicles running increased boost levels. Upgrade your N54’s crankcase ventilation system with the BMS Upgraded PCV Valve to ensure maximum performance, reliability, and engine longevity.
Show More Show Less

OEM Elring Oil Pan Gasket - BMW N52 N55 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:2602231
Part#: 11137600482
In Stock
$ 31.79 USD
Free Shipping on orders $49 and up
Metal/rubber gasket used to stop oil leaks, seals the oil pan to the engine block
Burger Motorsports - Corporate Logo
T#:21045489
Part#: BMS-OFC
Ships in 1 Business Day
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA
Show More Show Less

Elring Valve Cover Gasket - N54 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362693
Part#: 11127565286
In Stock
$ 36.99 USD
Free Shipping on orders $49 and up

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N54 3.0L

Show More Show Less
Elring Oil Pan Gasket - N52 N54 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:376168
Part#: 11137548031
In Stock
$ 37.99 USD
Free Shipping on orders $49 and up

If oil is leaking from the seal at the oil pan and block, you will need a new oil pan gasket. It is also wise to change this any time you have to pull the oil pan gasket.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N52 3.0L
N54 3.0L

Show More Show Less

Elring Rear Crankshaft Seal
For vehicles with production date up to 01/2009
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:591493
Part#: 11117584398
In Stock
$ 23.99 USD
Free Shipping on orders $49 and up
$ 23.99 USD
Free Shipping on orders $49 and up
90x110x12mm - usually replaced when servicing the timing chains

Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less
Vitesco Technologies MAP Sensor - BMW N20 N26 S55 S63
Upgraded 3.5 Bar MAP sensor to increase boost ceiling!
Vitesco Technologies - Corporate Logo
T#:39059260
Part#: 13627843531
Ships in 6 Business Days
$ 93.99

This product was last offered at the strikethrough price on
06-28-2026

$ 90.99 USD
Free Shipping on orders $49 and up
$ 90.99 USD
Free Shipping on orders $49 and up
This is a replacement Manifold Absolute Pressure sensor Located on the charge air cooler. The MAP controls the amount of fuel that goes through the injectors based on the pressure of air at the intake manifold. If your vehicle is giving you a MAP code, replace it immediately to ensure you get the best gas mileage and performance. It is common for this part to fail slowly and cause poor fuel mileage and hampered performance. When it fails, the vehicle will stutter and stall as it falls into a limp mode. One way to check if your MAP is bad is to unplug the connector before starting your car. If it idles well (compared to a previous poor idle), your MAP sensor likely needs to be replaced. If you let this maintenance part go, your fuel economy will suffer as too much fuel is going into the engine and not being burned. A great way to give your vehicle an efficiency boost.
Show More Show Less
Elring Valve Cover Gasket Set - N52 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362566
Part#: 11127582245
In Stock
$ 33.99 USD
Free Shipping on orders $49 and up

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes the following Seals:

  • Valve cover gasket
  • Spark plug seals

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N52 3.0L

Show More Show Less


Burger Motorsports - Corporate Logo
T#:34885402
Part#: 4BAR TMAP
Back Ordered
$ 139.99 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.
AAE Remanufactured High Pressure Fuel Pump - BMW N54 N55 3.0L ...
For vehicles with a production date up to 03/2012
Atlantic Automotive Engineering - Corporate Logo
T#:42200953
Part#: 13517616170RKT
Back Ordered
$ 816.99 USD
Free Shipping on orders $49 and up
$ 816.99 USD
Free Shipping on orders $49 and up
This is the updated high pressure fuel pump for BMW's with the N54 or N55 turbo engine. The high-pressure fuel pump is a known weak point on the N54 and N55 engines and can cause limp mode or even leave you stranded if it fails. This is the latest and most current version of the fuel pump offered. Common symptoms of a failing pump include rough idle, engine misfires, sudden loss of power, or failure to start. If your vehicle still has an earlier revision of the pump, especially if it's modified or will be in the future, this is a worthwhile upgrade for improved reliability. Included in the retail price is a refundable $130 core charge.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Fuel Pump Cam Follower - BMW/MINI B46 B48 B58
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:39768327
Part#: 06H109311B
In Stock
$ 29.99

This product was last offered at the strikethrough price on
09-02-2026

$ 28.95 USD
Free Shipping on orders $49 and up
$ 28.95 USD
Free Shipping on orders $49 and up

Elring - Corporate Logo
T#:340679
Part#: 11117587168
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up
$ 34.99 USD
Free Shipping on orders $49 and up

Rubber seals are often hardened and damaged by excessive heat and constant temperature changes causing them to become brittle and crack or split. If your seal has split, replace it with a new Elring seal for long reliability and to prevent further problems.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N20
N52
N54
N55
S55

Show More Show Less
OEM INA Idler / Deflection Pulley - E9x E82 E83 E60 E70
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:12945
Part#: 11287535860
In Stock
$ 23.28 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. �All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


For cars with the N52 6 cylinder engine.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2007-2010 E70 BMW X5 3.0si
2007-2010 E83 BMW X3 3.0i X3 3.0si

Show More Show Less

Ina - Corporate Logo
T#:19307
Part#: 11287556251
In Stock
$ 40.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Upper Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less
Elring Valvetronic Camshaft Adjuster Gasket
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:587127
Part#: 11127552280
In Stock
$ 28.79 USD
Free Shipping on orders $49 and up
Sits between the adjuster and the cylinder head

Elring Crankshaft Seal - Front
For vehicles with a production date up to 02/2011
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362853
Part#: 11117547842
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
65x79x10 - Usually replaced when servicing the timing chains

Ina - Corporate Logo
T#:31059479
Part#: 11287838194KT
In Stock
$ 30.99 USD
Free Shipping on orders $49 and up
If your water pump or alternator belt tensioner has failed because of the pulley or bearing, this replacement pulley is all you need to get your BMW back on the road! BMW and other brands usually sell the tensioner with the metal arm included, which increases the cost, even though the arm often doesn't need replacement. This OEM replacement is a much more affordable option, saving you $150 or more compared to the Genuine BMW tensioner.
Show More Show Less
OEM INA Idler Pulley -- E88 E82 E9X
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:386299
Part#: 11287578675
Ships in 1 day
$ 42.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

 OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Ina - Corporate Logo
T#:19306
Part#: 11287557851
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less


Vitesco Technologies - Corporate Logo
T#:33479594
Part#: 13538616079V1KT
In Stock
$ 3,113.99 USD
Free Shipping on orders $49 and up
The N54 fuel injector (13538616079) is a high-precision component designed to deliver fuel efficiently to the engine, ensuring optimal combustion and performance. It plays a key role in maintaining the N54's power output and fuel economy. Regular maintenance or replacement is essential, as worn injectors can lead to misfires, rough idling, or reduced performance. Ideal for enthusiasts looking to keep their N54 engine running smoothly.
Show More Show Less
Elring - Corporate Logo
T#:596447
Part#: 11217838071
In Stock
$ 43.92

This product was last offered at the strikethrough price on
09-04-2026

$ 38.99 USD
Free Shipping on orders $49 and up
$ 38.99 USD
Free Shipping on orders $49 and up
Elring Valve Stem Seal Kit - E60 E63 E64 E90 E92 E93
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:596449
Part#: 11340032548
In Stock
$ 36.72

This product was last offered at the strikethrough price on
08-26-2026

$ 33.99 USD
Free Shipping on orders $49 and up
$ 33.99 USD
Free Shipping on orders $49 and up

BMW Oil Pan Gasket
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:15081515
Part#: 24117572618
In Stock
$ 51.99

This product was last offered at the strikethrough price on
04-15-2026

$ 36.99 USD
Free Shipping on orders $49 and up
$ 36.99 USD
Free Shipping on orders $49 and up
A pretty tell-tale sign that you may need a new oil pan gasket is if you notice leaking oil around or on the bottom of your oil pan. Act quickly and replace your oil pan gasket to prevent this from getting any worse!
Show More Show Less

OEM INA Deflection Pulley -- E88 E82 E9X E84
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:386298
Part#: 11287578674
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Elring Cylinder Head Bolt Set
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:377135
Part#: 11127548799
Ships in 1 Business Day
$ 46.99 USD
Free Shipping on orders $49 and up
Head bolts are one time use, and under no circumstance should be reused. Head bolts stretch when torqued, and do not return to a non-stretched state.

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...
For use with converted single turbo N54 engines
Burger Motorsports - Corporate Logo
T#:23880741
Part#: N54STCCPBO
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
$ 30.00 USD
Free Shipping on orders $49 and up
If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.
Show More Show Less
Vitesco Technologies - Corporate Logo
T#:33512934
Part#: 13627593624
In Stock
$ 219.99 USD
Free Shipping on orders $49 and up
The MAF of your vehicle decides the quantity of fuel that is fed to the injectors according to the volume of air coming through the intake.

Ina - Corporate Logo
T#:377083
Part#: 12317560483
Ships in 3 Business Days
$ 63.99

This product was last offered at the strikethrough price on
09-29-2026

$ 61.60 USD
Free Shipping on orders $49 and up
$ 61.60 USD
Free Shipping on orders $49 and up

This is an OEM INA alternator pulley. Keep your belt drive system in top shape with this new pulley.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

OEM INA Accesory Belt Tensioner Pulley - Air Conditioner - BMW E9X M3...
For clockwise power steering pump
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:31092500
Part#: 11287838196KT
Ships in 1 day
$ 25.99 USD
Free Shipping on orders $49 and up
$ 25.99 USD
Free Shipping on orders $49 and up
If your air conditioning belt tensioner has failed because of the pulley or bearing, this replacement pulley is all you need to get your BMW back on the road! BMW and other brands usually sell the tensioner with the metal arm included, which increases the cost, even though the arm often doesn't need replacement. This OEM replacement is a much more affordable option, saving you $180 or more compared to the Genuine BMW tensioner.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:27171935
Part#: IRTHERM
Back Ordered
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). ​Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:583132
Part#: BMSBSPGT14MM
Ships in 7 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

  • Precisely gaps spark plugs for enhanced engine performance and efficiency
  • Speeds up the gapping process while ensuring accuracy and uniformity
  • Available in two sizes (14mm and 12mm) for a wider range of compatibility
  • Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
  • Made in the USA for premium quality and durability
Show More Show Less


Elring Crankcase Gasket Kit - BMW N55 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:44767322
Part#: 648.530
In Stock
$ 163.99 USD
Free Shipping on orders $49 and up
Crankcase gaskets and seals can fail just like any other seal on your BMW, leading to oil and coolant loss. If your engine is leaking fluids from multiple sources, this crankcase gasket kit from Elring is just what you need to get your BMW leak-free and back on the road!
Show More Show Less
Ina - Corporate Logo
T#:42301983
Part#: ZC0219
In Stock
$ 80.99

This product was last offered at the strikethrough price on
06-29-2026

$ 62.99 USD
Free Shipping on orders $49 and up
$ 62.99 USD
Free Shipping on orders $49 and up
Ensure your BMW runs like new with the precision and durability of this OEM INA timing chain - engineered for performance, built for reliability.
Vitesco Technologies - Corporate Logo
T#:39329319
Part#: 13628657300
In Stock
$ 52.99

This product was last offered at the strikethrough price on
07-02-2026

$ 51.99 USD
Free Shipping on orders $49 and up
$ 51.99 USD
Free Shipping on orders $49 and up

BMW Turbocharger Gasket Set
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:15180813
Part#: 298.900
In Stock
$ 130.99

This product was last offered at the strikethrough price on
05-07-2026

$ 94.99 USD
Free Shipping on orders $49 and up
$ 94.99 USD
Free Shipping on orders $49 and up
It's always a good idea to replace any gaskets and seals when replacing and reinstalling a turbo in your car!

Burger Motorsports - Corporate Logo
T#:54139632
Part#: BMS-TCP-BLU
Ships in 1 Business Day
New Item
$ 29.00 USD
Free Shipping on orders $49 and up
BMW Cylinder Head Gasket
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:15081510
Part#: 11127555311
Special Order: No Guaranteed ETA
$ 251.99

This product was last offered at the strikethrough price on
05-07-2026

$ 202.99 USD
Free Shipping on orders $49 and up
$ 202.99 USD
Free Shipping on orders $49 and up
Its always a good habit to replace any gasket while performing routine maintenance. Head gaskets are important pieces of the engine and if they happen to go bad and crack then that can lead to catastrophic failures. Replace these at any sign of a failure or even before to avoid issues!
Show More Show Less

Burger Motorsports - Corporate Logo
T#:599636
Part#: TYPEA4BARADAPTER
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21045480
Part#: BMS-TLID
In Stock
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.
Show More Show Less

BMW Cylinder Head Bolt Set
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:15247118
Part#: 11127838831
Ships in 1 Business Day
$ 60.99

This product was last offered at the strikethrough price on
05-08-2026

$ 53.99 USD
Free Shipping on orders $49 and up
$ 53.99 USD
Free Shipping on orders $49 and up
When replacing a head gasket or performing maintenance that requires the removal of the head, it is advised to replace the cylinder head bolts as they are torque to yield bolts that allow for one time use only.
Show More Show Less

Vaico - Corporate Logo
T#:34114245
Part#: V20-3674
In Stock
$ 827.99

This product was last offered at the strikethrough price on
05-07-2026

$ 483.99 USD
Free Shipping on orders $49 and up
$ 483.99 USD
Free Shipping on orders $49 and up

If your N52 engine is running rough, is low on power, or you are getting check engine lights for timing related issues, there is a good chance that you have a faulty VANOS component. The two most common parts to fail are the Camshaft Adjusters and VANOS Solenoids.

This repair kit from Vaico includes all of the basic parts necessary to service the VANOS system and restore smooth engine operation.

Included:

Intake Camshaft Adjuster w/ Impulse Wheel

Exhaust Camshaft Adjuster w/ Impulse Wheel

Camshaft Adjuster Bolts

VANOS Solenoid Valves

Valve Cover Gasket Set

Show More Show Less
Burger Motorsports - Corporate Logo
T#:5567062
Part#: OCCN55-235VERT
Ships on Oct 26, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)
Show More Show Less
Elring Cylinder Head Gasket Set - E90, E92, E93
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:379330
Part#: 11120429838
Ships in 1 Business Day
$ 319.99 USD
Free Shipping on orders $49 and up
Does not include the head gasket


Burger Motorsports - Corporate Logo
T#:57086690
Part#: BMSN55CUAK-R
Ships on Oct 26, 2026
New Item
$ 199.00 USD
Free Shipping on orders $49 and up
Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:49857415
Part#: BMSN55CUAK
Back Ordered
$ 199.00 USD
Free Shipping on orders $49 and up
Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity. Why Upgrade: While the N55 is a reliable platform, factory coils can struggle under high boost, heat, and load. B58 coils deliver stronger, more consistent spark, and this adapter kit ensures a clean, OEM-quality integration. Features & Benefits: Direct-fit adapter harness & mounts for straightforward B58 coil installation Plug-and-play design — no cutting, splicing, or permanent modifications Secure coil seating & alignment for consistent performance and reliability Improved ignition stability under high-load or tuned conditions, helping reduce misfires Applications: Stage 1–3 N55 builds, turbo upgrades, ethanol blends, track use, and aggressive daily driving Drivers looking to eliminate heat- and boost-related ignition issues Anyone seeking an OEM+ quality coil upgrade without a messy DIY install Result: A clean, professional installation that modernizes your ignition system and delivers reliable spark performance under all conditions. If you provide the kit’s brand/part number and whether your valve cover is stock or aftermarket, I can refine this description for precise fitment and application.
Show More Show Less