BMW Engine Parts for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

VAC Motorsports - Corporate Logo
T#:1061445
Part#: VAC-HPRBK-S65
Ships in 6 Business Days
$ 799.99 USD
Free Shipping
$ 799.99 USD
Free Shipping
VAC's S65 bearings are embraced by BMW engine builders world wide. Popular for both forced induction and N/A builds, their coated bearings are "friction resistant" making thermal breakdowns that can occur due to lack of lubrication a much less common occurrence. Helping to prevent premature engine failures on street cars, and spun bearings under stress at the track when things are most critical.
Show More Show Less
VAC Motorsports - Corporate Logo
T#:1061441
Part#: ARP-HSK-N54
Ships in 2 Business Days
$ 554.99 USD
Free Shipping
$ 554.99 USD
Free Shipping
Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.
Show More Show Less
MMX Performance - Corporate Logo
T#:44529374
Part#: MMR03-2001
Ships in 2 Business Days
$ 514.99 USD
Free Shipping
$ 514.99 USD
Free Shipping
Replace your factory plastic VANOS covers with these Billet Aluminum covers from MMX Performance for long term peace of mind

OMP - Corporate Logo
T#:1614
Part#: EA-462
Back Ordered
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less

VAC Motorsports - Corporate Logo
T#:17538610
Part#: ARP-HSK-N54-14
Ships in 2 Business Days
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping
The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.
Show More Show Less
MMX Performance - Corporate Logo
T#:19891361
Part#: MMR20-1004
Ships in 2 Business Days
$ 1,064.99 USD
Free Shipping
$ 1,064.99 USD
Free Shipping
Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower
Show More Show Less

Fuel-It! - Corporate Logo
T#:589404
Part#: N54-PORTINJCONMO
In Stock
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more.
Show More Show Less
Mahle Motorsports - Corporate Logo
T#:2928970
Part#: 197832209
In Stock at Vendor
$ 1,088.99 USD
Free Shipping
$ 1,088.99 USD
Free Shipping
Forged, 2618. Phosphate + Grafal + Hard Anodized top ring groove + TBC

MMX Performance - Corporate Logo
T#:4565824
Part#: MMR20-1003FK
Ships in 2 Business Days
$ 849.99 USD
Free Shipping
$ 849.99 USD
Free Shipping
Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.
Show More Show Less

MMX Performance - Corporate Logo
T#:45039725
Part#: MMR20-1004FK
Ships in 2 Business Days
$ 1,227.99 USD
Free Shipping
$ 1,227.99 USD
Free Shipping
The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.
Show More Show Less
Fuel-It! - Corporate Logo
T#:403509
Part#: BMW-S1LPFP-CK
Ships in 1 Business Day
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
This is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP.
Mahle Motorsports - Corporate Logo
T#:2928987
Part#: 197843622
In Stock
$ 1,429.99

This product was last offered at the strikethrough price on
09-02-2026

$ 1,335.99 USD
Limited Qty Sale
Free Shipping
$ 1,429.99

This product was last offered at the strikethrough price on
09-02-2026

$ 1,335.99 USD
Limited Qty Sale
Free Shipping
Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less


MMX Performance - Corporate Logo
T#:4552065
Part#: MMR03-0101-BL
Ships in 2 Business Days
$ 142.99 USD
Free Shipping
$ 142.99 USD
Free Shipping
If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less
Fuel-It! - Corporate Logo
T#:403280
Part#: FILPFPK4
Ships in 2 Business Days
Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping
Sale - Save 3%
$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.  

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol. 

The Stage 2 bucketless kit includes the following:

    • A custom anodized billet fitting for the pump output and stock fuel line connection.
    • Our custom billet aluminum anodized bracket for the pump and float assembly
    • Two cotter pins to secure your float assembly
    • A new E85 compatible Walbro 450 pump
    • Spare vent tube clip
    • A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

    • A complete plug and play solution by simply adding the secondary module
    • Our custom billet aluminum fitting to run both pumps in parallel
    • A new E85 compatible Walbro 450 pump
    • Wiring harness for the secondary pump
    • Spare vent tube clip
    • A new Walbro filter
  • Recommended accessories:
    • Lock Ring Removal Tool
    • Hobb's switch 
       
  • NOTE: These kits include a basic filter assembly.  When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump.  In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns.  Again for those applications we'd recommend one of our standard pump applications.
Show More Show Less
Fuel-It! - Corporate Logo
T#:403249
Part#: FILPFPK1
Ships in 1 Business Day
Starting at $ 199.99 USD
Free Shipping
Starting at $ 199.99 USD
Free Shipping

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

  • SAE J30R10 E85 compatible fuel line
  • 14ga fuel resistant wiring harness
  • Quick connect female bullet connectors (2)
  • Vent tube replacement clip
  • Nylon cable ties (10)
  • Stainless steel lock nuts (2)
  • 10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
  • Pushlock pump retention fittings (2)
  • 14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)

    *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.

    ** IMPORTANT:  Do NOT attempt to run this kit inline with a Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2928972
Part#: 197832225
Back Ordered
$ 1,088.99 USD
Free Shipping
$ 1,088.99 USD
Free Shipping

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm delivers exceptional performance and reliability for BMW engines. This high-quality piston kit is designed to replace the weaker factory cast aluminum pistons with robust forged pistons, enhancing durability and heat tolerance for extreme engine conditions.

  • Enhanced Strength: Forged from 2618 aluminum, these pistons are more resistant to extreme heat, detonation, and high pressure, providing superior performance.
  • Precision Specifications:
    • Bore: 84.50mm
    • Stroke: 89.6mm
    • Rod: 145.05mm
    • CH: 31.7mm
    • Piston Style: Dish with 4 valve reliefs
    • Crown Volume: 17.2cc
    • Piston Mass: 314g
    • Pin Diameter: 22mm
    • Pin Style: Floating
  • Complete Kit: Includes pistons, pins, clips, and rings (1.0mm, 1.2mm, 2.8mm thickness).
  • Durable Coatings: Features phosphate, Grafal, and hard anodized top ring groove for added longevity.
  • Sold as a Set: Comes as a set of 6 pistons.

MAHLE Motorsport's PowerPak and PowerPak+ piston kits are engineered for both high-performance and everyday driving, offering a reliable upgrade for BMW engines. With over 95 years of performance experience, MAHLE Motorsport provides advanced features and superior quality for your engine build.

Show More Show Less

PFS - Corporate Logo
T#:590135
Part#: E90BUCKETSTKSS
Ships in 10 Business Days
$ 551.99 USD
Free Shipping
$ 551.99 USD
Free Shipping
Mahle Motorsports - Corporate Logo
T#:2928989
Part#: 197843642
Ships in 2 Business Days
$ 1,429.99 USD
Free Shipping
$ 1,429.99 USD
Free Shipping
Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2928984
Part#: 197843322
Back Ordered
$ 1,429.99 USD
Free Shipping
$ 1,429.99 USD
Free Shipping
Forged 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
Mahle Motorsports - Corporate Logo
T#:2928983
Part#: 197843322T
Special Order: No Guaranteed ETA
$ 1,673.99 USD
Free Shipping
$ 1,673.99 USD
Free Shipping
Forged 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2928971
Part#: 197832209T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
$ 1,271.99 USD
Free Shipping
Forged, 2618. Phosphate + Grafal + Hard Anodized top ring groove + TBC Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston. MAHLE forged pistons more tolerant to the abuses of extreme heat, detonation and pressure inherent in performance oriented engines.
Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2928988
Part#: 197843622T
Special Order: No Guaranteed ETA
$ 1,673.99 USD
Free Shipping
$ 1,673.99 USD
Free Shipping
Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
Mahle Motorsports - Corporate Logo
T#:2928969
Part#: 197841309T
In Stock
$ 1,271.99 USD
Free Shipping
$ 1,271.99 USD
Free Shipping
Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
MMX Performance - Corporate Logo
T#:5269482
Part#: MMR03-0502BL
Special Order: No Guaranteed ETA
$ 136.99 USD
Free Shipping
$ 136.99 USD
Free Shipping
This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.
Show More Show Less


Fuel-It! - Corporate Logo
T#:403273
Part#: FILPFPK2
Back Ordered
Sale - Save 2% $ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD
Free Shipping
Sale - Save 2%
$ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD
Free Shipping
*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping
Show More Show Less
PFS - Corporate Logo
T#:590122
Part#: PFS-E9X-BCKTLSSE
Back Ordered
$ 609.99 USD
Free Shipping
$ 609.99 USD
Free Shipping
Looking to make 700WHP+ on your N54 powered vehicle, need the fuel to do to so, and don’t want to spend a ton of money? Look no further than the PFS bucketless fuel “External Series” pump upgrade! The external series takes our already best on the market bucketless design and adds a 3/8 Quick Disconnect bulkhead fitting to the top hat which allows you to run the secondary pump independent of the factory lines. This allows FULL FLOW from the second pump unhindered by the factory jet pump, siphon, fuel filter, or Fuel pressure regulator. All PFS “External Series” Bucketless pumps include the following: A complete plug and play solution by simply getting rid of your factory bucket Two New E85 compatible Walbro 450 F9000274 pumps Two new Walbro filters (Hydra-Mat available in options) Wiring Harness for the secondary pump with Fused power Hobbs Switch Fuel pump relay 3/8 QD fitting on the Passenger side top hat -6 Fuel line from Passenger side tank to the front of the vehicle -6 Fuel line from Driver side tank to the front of the vehicle PFS 10 micron filter with choice of outlet fittings Flow testing on the PFS test bench prior to shipping
Show More Show Less
Mahle Motorsports - Corporate Logo
T#:2928976
Part#: 197841325
Ships in 2 Business Days
$ 1,088.99 USD
Free Shipping
$ 1,088.99 USD
Free Shipping
Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2928968
Part#: 197841309
Ships in 2 Business Days
$ 1,088.99 USD
Free Shipping
$ 1,088.99 USD
Free Shipping

BMW N54 3.0L MAHLE Forged Piston Kit 84mm delivers superior performance and reliability for your BMW engine build. This high-quality piston kit replaces the factory cast aluminum pistons with robust forged pistons, offering enhanced durability and heat resistance. Designed to withstand the stresses of extreme temperatures, detonation, and high pressure, these pistons are ideal for high-performance applications. MAHLE Motorsport’s PowerPak Piston Kit ensures a significant upgrade in strength and reliability, making it perfect for both motorsport enthusiasts and those seeking to enhance their daily driving experience.

  • Enhanced Durability: Forged pistons provide superior strength and are more resistant to extreme heat, detonation, and high pressure compared to cast aluminum.
  • Precision Engineering: Made from high-quality 2618 alloy, ensuring reliability under demanding conditions.
  • Complete Kit: Includes pistons, pins, clips, and rings for a comprehensive upgrade.
  • Optimized Performance: Designed for high-performance applications, improving engine efficiency and power output.
  • Advanced Coatings: Features phosphate, Grafal, and hard anodized top ring groove coatings for extended longevity and performance.

Specifications:

  • Compression Ratio: 9.5:1
  • Bore: 84.00mm
  • Stroke: 89.6mm
  • Rod: 145.05mm
  • CH: 31.7mm
  • Piston Style: Dish, with 4 valve reliefs
  • Crown Volume: 17.2cc
  • Piston Mass: 314g
  • Piston Material: Forged, 2618
  • Pin Diameter: 22mm
  • Pin Style: Floating
  • Pins Included: Yes
  • Clip Style: Round Wire
  • Clips Included: Yes
  • Piston Ring Thickness: 1.0mm, 1.2mm, 2.8mm
  • Rings Included: Yes
  • Sold As: Set of 6
  • Coatings: Phosphate, Grafal, Hard Anodized top ring groove
Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2928986
Part#: 197843342
Back Ordered
$ 1,429.99 USD
Free Shipping
$ 1,429.99 USD
Free Shipping
Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
MMX Performance - Corporate Logo
T#:48608191
Part#: MMR03-0004
Ships in 7 Business Days
$ 40.00 USD
Free Shipping
$ 40.00 USD
Free Shipping
The MMX Billet Air Conditioning Cap Set replaces cheap OEM pieces with durable aluminum replacements that withstand track thermal cycles and everyday driving.

PFS - Corporate Logo
T#:51778140
Part#: PFS-POD-HPFP-UPG
Ships in 10 Business Days
New Item
$ 1,154.99 USD
Free Shipping
$ 1,154.99 USD
Free Shipping
This Planetary OverDrive system allows you to stick with your factory BMW high-pressure fuel pump while unlocking the flow needed for big-turbo builds.
Mahle Motorsports - Corporate Logo
T#:2928985
Part#: 197843342T
Special Order: No Guaranteed ETA
$ 1,673.99 USD
Free Shipping
$ 1,673.99 USD
Free Shipping
Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2928973
Part#: 197832225T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
$ 1,271.99 USD
Free Shipping
Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less

Mahle Motorsports - Corporate Logo
T#:2928990
Part#: 197843642T
Special Order: No Guaranteed ETA
$ 1,673.99 USD
Free Shipping
$ 1,673.99 USD
Free Shipping
Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
Mahle Motorsports - Corporate Logo
T#:2928977
Part#: 197841325T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
$ 1,271.99 USD
Free Shipping
Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
MMX Performance - Corporate Logo
T#:4538249
Part#: MMR17-0201
Special Order: No Guaranteed ETA
$ 770.99 USD
Free Shipping
$ 770.99 USD
Free Shipping
MMX's Performance Engine Oil cooler is a direct upgrade for the E9x M3 cooler. Perfect for upgraded vehicles such as those with superchargers or those simply needing a more reliable option over the OEM cooler. This upgraded cooler will help keep your engine oil temperatures in check be it on or off the track. Dimensions: Width 77cm Height 11.5cm Depth 6.5cm
Show More Show Less


PFS - Corporate Logo
T#:590134
Part#: E90BUCKETSTKDS
Back Ordered
$ 699.00 USD
Free Shipping
$ 699.00 USD
Free Shipping