Turbos for BMW 3 Series E93 (2007-2013)

VRSF 2" OEM Location High Flow Silicone Inlet Kit - N54

We Price Match - Give Us A Call or Chat! 2" Inlets

T#:585222

Part#: 10901052

In Stock

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Improve your restrictive OEM intake with this 2" Relocated Silicone High Flow Inlet Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF OEM location inlet upgrade kit provides a more direct, high flowing intake path for your turbos. This kit includes everything you need to replace the OEM inlets, including relocation brackets, filters, hoses, and the steel wire reinforced silicon tubing.

Show More Show Less

Pure Turbo Heavy Duty N55 Pneumatic Wastegate Actuator - BMW N55 3.0L...

T#:17771605

Part#: HDN55WG

In Stock

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

The early N55 turbocharger is notorious for pneumatic wastegate actuator failure, a common issue that triggers frustrating boost errors and persistent check engine lights. Because BMW does not provide this specific component as a standalone replacement, owners are often left with few official repair options. Pure Turbos solves this problem with an upgraded actuator engineered to fix the inherent weaknesses of the original equipment while simultaneously boosting the efficiency of the entire turbocharging system. One of the primary benefits of this enhanced actuator is its ability to deliver approximately 2 psi of additional boost compared to the factory unit while maintaining the same Wastegate Duty Cycle. By optimizing how exhaust gases are managed and bypassed, this component allows the engine to generate more power without requiring more effort from the electronics. This increased pressure translates directly into sharper throttle response and a noticeable jump in horsepower, making it an essential upgrade for drivers who want to restore their vehicle's reliability while enjoying a more aggressive and responsive driving experience.

Show More Show Less

VRSF 1.75" OEM Location High Flow Silicone Inlet Kit - N54

We Price Match - Give Us A Call or Chat! 1.75" Inlets

T#:585220

Part#: 10901050

In Stock

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Improve your restrictive OEM intake with this 1.75" Relocated Silicone High Flow Inlet Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF OEM location inlet upgrade kit provides a more direct, high flowing intake path for your turbos. This kit includes everything you need to replace the OEM inlets, including relocation brackets, filters, hoses, and the steel wire reinforced silicon tubing.

Show More Show Less

Pure Turbos PURE600 Turbo Upgrade - BMW E9X 335 N54 3.0L

These will not work with OEM stock inlets - Aftermarket 2" inlet kit is required

T#:594820

Part#: PURE-N54-0014

In Stock

$ 1,995.00 USD

Add to Wish List

Qty

$ 1,995.00 USD

Add to Wish List

With a set of upgraded turbos and some supporting modifications, your N54 engine can produce 550+ wheel horsepower! These PURE600 turbos from Pure Turbos feature aftermarket (OEM design) housings as well, eliminating the need to send in your stock turbos for a core charge.

Show More Show Less

Pure Turbos N55 PURE500 Turbo Upgrade - BMW N55 3.0L w/ PWG

PWG models only

T#:13957903

Part#: N55PURE500PWG

In Stock

$ 1,136.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

These PURE500 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance, there is no better stage 1 turbo option for your N55!

Show More Show Less

URO Vacuum Canister - BMW N54 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:39768337

Part#: 11652247620

In Stock

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Used in the turbo system to help hold vacuum.

CTS Turbo Stage 2 Turbo Upgrade - E9x N54

T#:5788138

Part#: CTS-TR-0300

Ships in 4 Business Days

Sale - Save 10% $ 1,499.99

This product was last offered at the strikethrough price on
09-29-2026

$ 1,349.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,499.99

This product was last offered at the strikethrough price on
09-29-2026

$ 1,349.99 USD

Add to Wish List

If you looking to get the best daily-driven power and torque out of your N54, this is the kit for you! CTS Turbo is proud to announce their standard Stage 2 500 BMW N54 turbocharger kit. Using larger wheels than stock these turbos are good for 550-600hp, with a good low-end torque and excellent boost response, without sacrificing the top end. Features: 6-blade billet compressor wheel 9-blade turbine wheel Flow-optimized stainless steel exhaust manifold and housing Bolt-on fitment, compatible with any downpipes and charge pipes 2″ compressor covers (require aftermarket inlets) Installation kit included Tuning for Stage 2 turbos is required No core required, complete new units

Show More Show Less

N54 Turbo Boost Leak Tester - BMW 3-Series E9X N54 3.0L

T#:641167

Part#: BMW-N54-CAP

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

This Boost Leak Tester kit mounts inside both of the flexible intake hoses that lead to your turbo's compressor inlet flanges. You will need to remove the air box (or your aftermarket air filters) to expose the 2 intake pipes. Install the testers in each pipe and pressurize the system using the tire schrader with your tire inflation tool. The kit comes with the necessary caps to block the diverter valve return flanges on the intake pipes, also a cap to block the breather line at the bakc of the valve cover. Once the kit is installed, use compressed air to charge the system and you will see that both gauges read the compressor pressure you are filling with. You'll be able to test the turbo to the motor checking all leak points in between, including intercooler, clamped connections, intake manifold, divertor valves and the many random potential leak points. Note: Testing at the intake pipe, you may hear noise coming from the o-ring (at ~12 psi test pressure) that seals the intake pipe to the turbo inlet from debris. This is not a boost leak, these are not meant to see boost and not intended to be perfectly sealed, however hearing this hissing may be mis-diagnosed as a leak. In this case reduce the pressure. If no obvious leaks are heard in any other location, the test is complete and there are no significant leaks The gauge on the boost leak tester allows the user to: apply a safe amount of pressure to prevent injury or damage to the charge pipes or engine read how fast the system holds and bleeds air after removing the air source give a good comparison of compressor outlet air Vs. boost test air while pressurizing. The smaller the difference the lesser the air loss in the system Design Features: Plastic End Caps with 1/8" NPT threaded gauge port & fitting port Boost Gauges with 30 PSI / 1Bar Boost Gauge Universal Tire Schrader Valve (can be removed and tapped for 1/4" NPT thread fitting if desired) (2) Stainless Steel T-Bolt Clamps with Teflon lock-nut (3) Vinyl Caps for diverter valve return and valve cover breather

Show More Show Less

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

For use with converted single turbo N54 engines

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

OEM Rein Turbo Water Return Line - BMW N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:5718801

Part#: 11537583903

In Stock

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Rein turbo hoses are manufactured with premium OE quality material designed to withstand the high demands of automotive power turbo systems. Rein turbo hoses are resistant to excessive heat, oil, and ozone factors that break down rubber and cause premature failure. Rein turbo hoses are manufactured with premium OE quality material to offer maximum protection from premature failures. Rein turbo hoses are designed as direct-fit replacements to ensure a trouble-free installation. Rein turbo hoses come complete with hardware and seals when necessary to save installation time and additional costs. Replace leaking or otherwise faulty hoses with Rein premium components to restore your vehicle to safe and optimal performance levels.

Show More Show Less

OEM Rein Front Turbo Oil Return Line - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:402125

Part#: 11427563713

In Stock

$ 132.99

This product was last offered at the strikethrough price on
05-05-2026

$ 83.99 USD

Add to Wish List

Qty

$ 83.99 USD

Add to Wish List

This is the oil line responsible for carrying oil away from the front turbocharger. When these lines leak, they leak profusely, so be sure and replace them any time a leak starts.

Rein Turbo Water Feed Line

2X Entries Into Our F80 M3 Sweepstakes

T#:17738382

Part#: 11537583900

In Stock

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Replace leaking or faulty hoses with Rein premium components to restore your vehicle to safe and optimal performance levels.

Rein Turbo Water Feed Line - Rear Turbo - N54 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:1653147

Part#: 11537558901

In Stock

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Feeds coolant to the turbo system. This item fits the following BMW Chassis: E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02 Fits BMW Engines including: N54,N54T

Rein Turbo Water Return Line - Rear Turbo - BMW N54 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:8014959

Part#: 11537558902

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Returns the coolant from the turbo system to the cooling system.

BMW N54 3.0L Turbo Oil Feed Line - Rear Turbo

2X Entries Into Our F80 M3 Sweepstakes

T#:554456

Part#: 11427562798

In Stock

Sale - Save 17% $ 71.99

This product was last offered at the strikethrough price on
10-06-2026

$ 59.99 USD

Add to Wish List

Qty

Sale - Save 17%

$ 71.99

This product was last offered at the strikethrough price on
10-06-2026

$ 59.99 USD

Add to Wish List

BMW N54 3.0L Turbo Oil Feed Line - Rear Turbo is essential for supplying oil to the rear turbocharger of the BMW N54 engine. This high-quality oil feed line ensures reliable oil delivery, crucial for the optimal performance of the turbocharger. Designed to replace old or leaking lines, it helps prevent oil leaks, which can lead to severe engine damage. Replacing a worn or leaking oil feed line is crucial for maintaining the integrity of the turbo system and avoiding costly repairs.

Ensures reliable oil supply to the rear turbocharger
Prevents oil leaks that can cause engine damage
Enhances turbocharger performance by providing consistent oil flow
High-quality construction for durability and long-lasting performance
Easy replacement of old or leaking oil lines

Show More Show Less

P3Cars N20/N55 BMW Boost Tap

T#:394449

Part#: P3BTAP1

In Stock

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

Includes 5' of 5/32" boost tubing.

OEM Rein Front Turbo Oil Feed Line - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:402123

Part#: 11427562797

In Stock

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

This is the oil line responsible for supplying oil to the front turbocharger. When these lines leak, they leak profusely, so be sure and replace them any time a leak starts.

OEM Rein Forward Turbo Water Feed Line - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:402119

Part#: 11537558899

In Stock

$ 50.55 USD

Add to Wish List

Qty

$ 50.55 USD

Add to Wish List

A leaking water feed line can create a serious problem in turbo engines. Be sure to fix any leaks immediately.

Rein Turbo Oil Drain Line - Rear Turbo

2X Entries Into Our F80 M3 Sweepstakes

T#:402124

Part#: 11427562800

In Stock

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Carries oil away from the rear turbocharger

Rein Turbo Water Return Line - Front Turbo

2X Entries Into Our F80 M3 Sweepstakes

T#:17771577

Part#: 11537558900

In Stock

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

Rein hoses are resistant to excessive heat, oil, and ozone factors that break down rubber and cause premature failure.

Pure Turbos N55 PURE600 Turbo Upgrade - BMW N55 3.0L w/ PWG

T#:38385325

Part#: BMW-N55-PURE-600

Ships in 8 Business Days

$ 2,589.00 USD

Add to Wish List

Qty

$ 2,589.00 USD

Add to Wish List

Upgrade your N55's turbocharger to Pure Turbo's PURE600 upgrade to make increased power without sacrificing drivability or reliability.

Pure Turbos N54 Stage 1 Turbo Upgrade - Stock Inlet - E9X 335i/is/xi ...

For use with stock inlet pipes (1.81")

T#:578258

Part#: PURE-N54-0009KT

Ships in 5 Business Days

$ 2,336.99

This product was last offered at the strikethrough price on
07-12-2026

$ 2,250.00 USD

Add to Wish List

Qty

$ 2,250.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. If the stock power of your BMW's N54 isn't quite enough for you but you also don't want to go too crazy, this Stage 1 turbo upgrade from Pure Turbos is the best option on the market! With just a few supporting modifications you can easily achieve 450+ reliable wheel horsepower, enough for a bit of fun but not too much to make things unwieldy. In addition to Pure's turbo modifications, these turbos have machined inlets to alleviate issues with inlet hoses popping off. Two options are available: the stock size of 1.81" (this kit) or with 2.0" oversized inlets (T#578261) for use with oversized pipes.

Show More Show Less

Rein Turbocharger Vacuum Reservoir - E chassis - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:53856273

Part#: 11652247620

In Stock at Vendor

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

The Rein Automotive OE Series vacuum reservoir is engineered to maintain peak pneumatic response within your vehicle’s forced induction system.

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ PWG

For vehicles with pneumatic waste gate (PWG)

T#:578272

Part#: PURE-N55-0001KT

Ships in 5 Business Days

$ 2,906.99

This product was last offered at the strikethrough price on
07-14-2026

$ 2,800.00 USD

Add to Wish List

Qty

$ 2,800.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $300 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with pneumatic waste gate (PWG)

Show More Show Less

Pure Turbos N54 Stage 2 "Hi-Flow" Turbo Upgrade - E9X 335i/is/xi N54 ...

For use with 2.0" inlet pipes only - Not compatible with stock inlets

T#:578242

Part#: PURE-N54-0004KT

In Stock

$ 4,042.99

This product was last offered at the strikethrough price on
07-13-2026

$ 4,029.00 USD

Add to Wish List

Qty

$ 4,029.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. For the enthusiast hunting for big power out of their N54, Pure Turbos has the answer with their Stage 2 "Hi-Flow" turbocharger upgrade. With supporting modifications, 600-700 reliable wheel horsepower is achievable - enough to be wild on the street and highly competitive on the track or strip.

Show More Show Less

Turbocharger Boost Solenoid Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:31622556

Part#: 11747626350

In Stock

$ 80.99 USD

Add to Wish List

Qty

$ 80.99 USD

Add to Wish List

Pure Turbos N55 PURE750 Turbo Upgrade - BMW N55 3.0L w/ PWG

PWG models only

T#:13957911

Part#: N55PURE750PWG

Ships in 5 Business Days

$ 3,107.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,107.00 USD

Add to Wish List

Qty

$ 3,107.00 USD

Add to Wish List

These PURE750 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance! The craziness pursues with the possibility of 608whp with E30 and meth running 25psi but those numbers could reach upwards of 650+ with other upgrades! crazy. we know, which leaves this as one of the best stage 2 options for your N55!

Show More Show Less

Pure Turbos N54 Stage 2 "Daily-Driver" Turbo Upgrade - E9X 335i/is/xi...

For use with 2.0" inlet pipes only - Not compatible with stock inlets

T#:578239

Part#: PURE-N54-0003KT

Ships in 5 Business Days

$ 3,524.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,511.00 USD

Add to Wish List

Qty

$ 3,511.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. For the enthusiast hunting for big street and strip power out of their N54, Pure Turbos has the answer with their Stage 2 "Daily-Driver" turbocharger upgrade. Similar to Pure's Stage 2 "Hi-Flow" turbos, but a little tamer: ideal for a daily driver. With supporting modifications, 450-600 reliable wheel horsepower is achievable - enough to be wild enough for any weekday commute.

Show More Show Less

Pure Turbos N54 Pure Stage 1 Turbo Upgrade - 2.0" Inlet - E9X 335i/is...

For use with 2.0" inlet pipes.

T#:578261

Part#: PURE-N54-0010KT

Ships in 5 Business Days

$ 2,336.99

This product was last offered at the strikethrough price on
07-12-2026

$ 2,250.00 USD

Add to Wish List

Qty

$ 2,250.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. If the stock power of your BMW's N54 isn't quite enough for you but you also don't want to go too crazy, this Stage 1 turbo upgrade from Pure Turbos is the best option on the market! With just a few supporting modifications, you can easily achieve 450+ reliable wheel horsepower, enough for a bit of fun but not too much to make things unwieldy. In addition to Pure's turbo modifications, these turbos have machined inlets to alleviate issues with inlet hoses popping off. Two options are available: the stock size of 1.81" (T#578258) or this package with 2.0" oversized inlets for use with oversized pipes.

Show More Show Less

CTS Turbo Stage 2+ Turbo Upgrade - E9x N54

T#:5788142

Part#: CTS-TR-0300-RS

Back Ordered

$ 1,699.99 USD

Add to Wish List

Qty

$ 1,699.99 USD

Add to Wish List

CTS Turbo is proud to announce their standard Stage 2+ 700 BMW N54 turbocharger kit. This is the perfect upgrade for those wanting to get the most out of their engine before moving completely to single turbos! Using larger wheels than stock these turbos are good for 600-700hp, with extremely noticeable mid-high range RPM performance. Features: GTX Gen2 11-blade billet compressor wheel 9-blade turbine wheel Flow-optimized stainless steel exhaust manifold and housing Bolt-on fitment, compatible with any downpipes and charge pipes 2" compressor covers (require aftermarket inlets) Installation kit included Tuning for Stage 2+ turbos is required No core required, complete new units

Show More Show Less

Pneumatic Boost Solenoid - N20 N55 N63 S63 Engines

2X Entries Into Our F80 M3 Sweepstakes

T#:6166479

Part#: 11747626351

Ships in 2 Business Days

$ 99.99

This product was last offered at the strikethrough price on
06-30-2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Optimize the performance of your BMW's N20, N55, N63, or S63 engine with the Pneumatic Boost Solenoid. This essential actuator plays a crucial role in regulating vacuum, influencing the overall performance of your vehicle. Ensure your BMW operates at its best by addressing faulty boost solenoids promptly.

Engine Performance Optimization: The boost solenoid enhances the overall performance of N20, N55, N63, and S63 engines.
Vacuum Regulation: Precisely regulates vacuum levels, contributing to efficient engine operation.
Compatibility: Designed for BMW vehicles with N20, N55, N63, and S63 engines for a perfect fit.
Fault Resolution: Promptly addressing faulty boost solenoids ensures consistent and reliable vehicle performance.

Upgrade your BMW's engine performance with the Pneumatic Boost Solenoid, designed to deliver optimal functionality for N20, N55, N63, and S63 engines.

Show More Show Less

N54 Single Turbo Conversion Oil Fitting

For use with converted single turbo N54 engines

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Turbocharger Stud - 11658634236 - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:24145941

Part#: 11658634236

Ships in 2 Business Days

$ 13.99

This product was last offered at the strikethrough price on
08-31-2026

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

OE replacement for the threaded bolt/stud found on the N54 front turbocharger assembly.

URO Turbo Coolant Line - BMW N54 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:37925872

Part#: 11537558901

Ships in 2 Business Days

$ 48.54 USD

Add to Wish List

Qty

$ 48.54 USD

Add to Wish List

URO Turbo Coolant Line - BMW N54 3.0L

The URO Turbo Coolant Line - BMW N54 3.0L is a premium replacement designed to restore proper coolant circulation and maintain optimal turbocharger performance. Precision-formed to match the exact OE length and shape, this coolant line ensures seamless integration and factory-correct appearance. Constructed with high-quality materials, it resists exposure to coolant and extreme turbocharger heat, preventing premature wear and failure. Equipped with the correct end fittings, it provides a hassle-free installation and a secure, leak-free connection. Ideal for BMW N54 3.0L engines, this coolant line helps prevent overheating and extends the life of your turbocharger system.

Key Benefits:

Direct OE replacement for a precise fit and factory-like appearance
High-quality construction resists coolant exposure and extreme turbo heat
Pre-formed design ensures proper routing and optimal coolant flow
Leak-free performance with correctly fitted end connections
Enhances turbo longevity by maintaining proper cooling efficiency

Ensure your BMW N54 3.0L turbo system operates at peak efficiency with the URO Turbo Coolant Line, engineered for durability and reliable performance.

Show More Show Less

Pure Turbos N54 Stage 2 "Hi-Flow" Turbo Upgrade w/ Installation Kit -...

With upgraded, 2.0" inlet snout to alleviate inlets popping off. For use with 2.0" inlet pipes.

T#:20749230

Part#: PUREN540004INSKT

Ships in 5 Business Days

$ 4,291.99

This product was last offered at the strikethrough price on
07-14-2026

$ 4,278.00 USD

Add to Wish List

Qty

$ 4,278.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Sometimes, you just have to send it! Pure Turbos have that exact idea for their Stage 2 "Hi-Flow" turbo upgrade. Designed to make your N54 powered BMW a monster on the street or track, this kit is designed to provide you with up to 700 reliable horsepower with supporting modifications. In addition to Pure's turbo modifications, these turbos have machined inlets to alleviate issues with inlet hoses popping off. Two options are available, the stock size of 1.81" (T#578217) or this package with 2.0" oversized inlets for use with oversized pipes. Features of this Pure Turbos upgraded OEM turbocharger: Upgraded billet compressor wheel Upgraded Hi-Flow turbine wheel Bullet-nosed nuts Upgraded wastegates Machined inlet snouts (no more inlet hoses popping off) VSR balanced to better than OE tolerances Featuring a limited 1 year warranty. Price includes a $600 core charge to be refunded once we receive your rebuildable cores.

Show More Show Less

TechSelect Turbocharger Hose Kit - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:14023866

Part#: TRK0010

In Stock

$ 348.99

This product was last offered at the strikethrough price on
09-29-2026

$ 344.99 USD

Add to Wish List

Qty

$ 344.99 USD

Add to Wish List

TechSelect Turbo Kits include all hoses, hardware, and gaskets needed. TechSelect hoses are direct replacements for the OE and include brackets, hardware, and sealing components This hardware is designed and manufactured to withstand the rigorous operating environments of turbocharger systems Gaskets included are direct replacements to the OE ensuring optimal performance

Show More Show Less

Turbocharger Cut-Off Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:25109077

Part#: 11657601058

Ships on Oct 30, 2026

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

If your vehicle is producing boost-related engine fault codes, it may be time to replace your diverter valve. This valve, found on the compressor housing, is designed to vent pressurized air when the throttle plate is closed, preventing compressor surge in the process.

This factory replacement unit is a "plumb-back" style, meaning the pressurized air is recirculated into the inlet for silent operation.

Compressor surge and boost-related fault codes can hurt your vehicle's powertrain. Thankfully, URO Parts offers this replacement unit designed to fix these issues.

Show More Show Less

Project Cars

SELECT YOUR BMW

Turbos for BMW 3 Series E93 (2007-2013)

Sub-Categories

URO Turbo Coolant Line - BMW N54 3.0L

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results