BMW Fuel System Parts for BMW 3 Series E93 (2007-2013)

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Bav Auto Fuel Level Sensor & Fuel Pump Lock Ring Tool - BMW & MINI ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580400

Part#: B8800089

In Stock

Sale - Save 10% $ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD

Add to Wish List

Used to remove fuel level and fuel pump lock rings properly to avoid damage.

Bav Auto Fuel Injector Removal/Installation Tool - N55

For E - Chassis N55

10X Entries Into Our F80 M3 Sweepstakes

T#:580388

Part#: B8800075

Ships on Feb 26, 2027

Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.

Bav Auto Low Fuel Pressure Sensor - Multiple BMWs

10X Entries Into Our F80 M3 Sweepstakes

T#:639834

Part#: 13537614317

In Stock

Sale - Save 20% $ 52.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 52.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.39 USD

Add to Wish List

This low-pressure fuel sensor is commonly a cause of an "Increased Emissions" warning on the idrive and for check engine (SES) lights on BMW's with the N54 6 cylinder turbo engine or the S65 V8 engine in the M3. It will also fit a limited number of cars with the N55 engine. This sensor can be traced to a number of drivability issues, including cold start running problems, misfires, stumbling, hesitations, and overall rough running. You will likely have a code for the misfires, rich condition, or for the sensor itself. In some cases, the combination of codes can bring about a limp mode. Replacing this sensor is an easy and inexpensive first step if you're having any of these issues. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Control Unit Fuel Pump - Priced Each

10X Entries Into Our F80 M3 Sweepstakes
This part must be coded to your vehicle

T#:19560854

Part#: 16147229173

In Stock

Sale - Save 20% $ 224.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 224.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.99 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel ...

T#:21933055

Part#: N54PIIMINJECT

Back Ordered

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

Bav Auto Fuel Injector Seal Installer & Remover - N54/N63

10X Entries Into Our F80 M3 Sweepstakes

T#:580445

Part#: B8800140

In Stock

Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.

BLACKLINE Performance Fuel Cap Cover

For Model Years 2010 or Newer

T#:797049

Part#: FXXFCC

In Stock

$ 47.00 USD

Add to Wish List

Qty

$ 47.00 USD

Add to Wish List

Give your gas cap a much-needed upgrade with the all new BMW M Car Series Billet Aluminum Fuel Cap Cover from Goldenwrench Supply Co. This performance Fuel Cap Cover Kit comes with a Billet Aluminum Fuel Cap Cover, and Installation Instructions. Please note this a cover that affixes on top of your factory fuel cap installing easily in minutes.

Show More Show Less

Fuel-It! Port Injection Kit With Intake Manifold, 950cc Injectors & F...

T#:26038558

Part#: BMW-N54-PRM-950

Ships on Oct 22, 2026

$ 1,088.00 USD

Add to Wish List

Qty

$ 1,088.00 USD

Add to Wish List

Bav Auto High Pressure Fuel Pressure Sensor - BMW N54 N63 S63 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:639835

Part#: 13537537319

In Stock

Sale - Save 15% $ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.44 USD

Add to Wish List

Qty

Sale - Save 15%

$ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.44 USD

Add to Wish List

Located at the rear of the high-pressure fuel rail, this pressure sensor relays fuel pressure information to the vehicle's DME/ECS and is a common source of fault codes. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Ch...

T#:589404

Part#: N54-PORTINJCONMO

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more.

Show More Show Less

BLACKLINE Performance Fuel Cap Cover - Motorsport Blue

Fits 2010+ Model Year BMWs only!

T#:6635763

Part#: FXXFCC-B

In Stock

$ 47.00 USD

Add to Wish List

Qty

$ 47.00 USD

Add to Wish List

Give your gas cap a much-needed upgrade with the all new BMW M Car Series Billet Aluminum Fuel Cap Cover from Goldenwrench Supply Co. This performance Fuel Cap Cover Kit comes with a Billet Aluminum Fuel Cap Cover, and Installation Instructions. Please note this a cover that affixes on top of your factory fuel cap installing easily in minutes.

Show More Show Less

Stage 1 Low Pressure Fuel Pump Complete Inline Upgrade

T#:403509

Part#: BMW-S1LPFP-CK

Ships in 2 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

This is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP.

E9X/E8X Bucketed Fuel Pump Upgrade - Single Shot

T#:590135

Part#: E90BUCKETSTKSS

Ships on Oct 21, 2026

$ 551.99 USD

Add to Wish List

Qty

$ 551.99 USD

Add to Wish List

Fuel-It! Low Pressure Fuel Pump Upgrade Bucketless - N54/55 E-Series ...

T#:403280

Part#: FILPFPK4

Ships in 2 Business Days

Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD

Add to Wish List

Sale - Save 3%

$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD

Add to Wish List

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol.

The Stage 2 bucketless kit includes the following:

- A custom anodized billet fitting for the pump output and stock fuel line connection.
- Our custom billet aluminum anodized bracket for the pump and float assembly
- Two cotter pins to secure your float assembly
- A new E85 compatible Walbro 450 pump
- Spare vent tube clip
- A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

- A complete plug and play solution by simply adding the secondary module
- Our custom billet aluminum fitting to run both pumps in parallel
- A new E85 compatible Walbro 450 pump
- Wiring harness for the secondary pump
- Spare vent tube clip
- A new Walbro filter

Recommended accessories:
- Lock Ring Removal Tool
- Hobb's switch
NOTE: These kits include a basic filter assembly. When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump. In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns. Again for those applications we'd recommend one of our standard pump applications.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 1 - N54/55 E-Series ...

T#:403249

Part#: FILPFPK1

Ships in 1 Business Day

Starting at $ 199.99 USD

Add to Wish List

Starting at $ 199.99 USD

Add to Wish List

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP). They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

SAE J30R10 E85 compatible fuel line
14ga fuel resistant wiring harness
Quick connect female bullet connectors (2)
Vent tube replacement clip
Nylon cable ties (10)
Stainless steel lock nuts (2)
10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
Pushlock pump retention fittings (2)
14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)
*Note: Walbro does not warranty this pump for E85 use. If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.
** IMPORTANT: Do NOT attempt to run this kit inline with a Stage 2 kit. The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

T#:403279

Part#: FILPFPK3

Ships Today

Starting at $ 1,155.83 USD

Add to Wish List

Starting at $ 1,155.83 USD

Add to Wish List

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N54/55 E-Series ...

T#:403273

Part#: FILPFPK2

Back Ordered

Sale - Save 2% $ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

Sale - Save 2%

$ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping

Show More Show Less

N54 Dual Bucketless Fuel Pump Upgrade - "External Series"

T#:590122

Part#: PFS-E9X-BCKTLSSE

Back Ordered

$ 609.99 USD

Add to Wish List

Qty

$ 609.99 USD

Add to Wish List

Looking to make 700WHP+ on your N54 powered vehicle, need the fuel to do to so, and don’t want to spend a ton of money? Look no further than the PFS bucketless fuel “External Series” pump upgrade! The external series takes our already best on the market bucketless design and adds a 3/8 Quick Disconnect bulkhead fitting to the top hat which allows you to run the secondary pump independent of the factory lines. This allows FULL FLOW from the second pump unhindered by the factory jet pump, siphon, fuel filter, or Fuel pressure regulator. All PFS “External Series” Bucketless pumps include the following: A complete plug and play solution by simply getting rid of your factory bucket Two New E85 compatible Walbro 450 F9000274 pumps Two new Walbro filters (Hydra-Mat available in options) Wiring Harness for the secondary pump with Fused power Hobbs Switch Fuel pump relay 3/8 QD fitting on the Passenger side top hat -6 Fuel line from Passenger side tank to the front of the vehicle -6 Fuel line from Driver side tank to the front of the vehicle PFS 10 micron filter with choice of outlet fittings Flow testing on the PFS test bench prior to shipping

Show More Show Less

Fuel-It! 650HP S65 E9X BMW M3 LPFP Upgrade - w/ 4PSI Hobbs Switch ...

T#:18202901

Part#: FIS65M3LPFP

Back Ordered

$ 514.00 USD

Add to Wish List

Qty

$ 514.00 USD

Add to Wish List

As these cars get older we're seeing more issues with the stock components and more demand for cost-conscious fueling solutions. The new Fuel-It 650HP line of fuel system upgrades are designed with those needs in mind while maintaining a budget. They make the most of the stock components to maintain stock reliability and drive-ability but when the boost gets cranked up, the Fuel-it 650HP components kick in to support the additional fueling needs of your high horsepower car. With the Fuel-It 650HP lineup, you can upgrade your components all at one time or upgrade them as time and budget allows. If upgrading one component at a time, we'd recommend starting with the LPFP first as that is the heart of your fuel system, without a good Low Pressure Fuel pump (LPFP) you can't supply the fuel needed to any of your other components. Your secondary pump can NOT run full time, it must only be run under boost only. Running it full time will place additional strain on the stock system, will lead to high fuel temps, and pump or component failure. To turn the secondary pump on under boost we recommend running the included 4psi Hobb's switch. Included with all S65 LPFP upgrades: Walbro 450 pump (F90000274) Black Anodized Custom fitting Pump brackets 9/64" terminals and associated hardware Fuel line Replacement PITA clip Wiring harness

Show More Show Less

Fuel-It! Flex Fuel Kit - N54/N55 E Chassis

T#:21242695

Part#: FFK-N5XA

In Stock

Sale - Save 4% $ 485.99

This product was last offered at the strikethrough price on
09-20-2026

Starting at $ 464.99 USD

Add to Wish List

Sale - Save 4%

$ 485.99

This product was last offered at the strikethrough price on
09-20-2026

Starting at $ 464.99 USD

Add to Wish List

If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Chassis BMW. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. *For the BMW N54 E-series JB4 platform connect the white wire to position #15 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *For the BMW N55 E-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Port Injection Kit

T#:25839000

Part#: BMW-N54-PRM-750

Ships on Oct 22, 2026

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

E-Chassis Stage 3 Bucketless LPFP Upgrade - N54/55

T#:38890918

Part#: BMSS3BLPFPN5455

Ships on Oct 22, 2026

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

If you're already using our Stage 2 Bucketless LPFP and want to upgrade to Stage 3, this kit is for you. If you don’t have the Stage 2 kit, you can purchase it here. Note: Stage 3 requires the Stage 2 bucketless kit. The Stage 3 upgrade kit includes: - Complete plug-and-play solution with the addition of the secondary module - Custom billet aluminum fitting to run both pumps in parallel - Wiring harness for the secondary pump - Spare vent tube clip - New Walbro filter - New E85-compatible Walbro 450 pump (F90000274) - Optional upgrade to Walbro 525 pump (F90000285) Recommended accessories: - Lock Ring Removal Tool - Hobb's switch

Show More Show Less

Fuel-It! Elite Port Injection Kit With 950cc Injectors & Fuel Line ...

T#:26038542

Part#: BMW-EPI-950

Ships on Oct 22, 2026

$ 1,188.00 USD

Add to Wish List

Qty

$ 1,188.00 USD

Add to Wish List

This kit is designed to enhance performance by adding six supplemental low-pressure fuel injectors, capable of supporting 1000+ WHP on E85 and similar high-performance fuels.

Crafted with precision, the manifold spacers are CNC machined and anodized to ensure durability and prolonged service life. Each kit comes complete with all necessary installation hardware, a gasket set, and a plug-and-play fuel line adapter for seamless integration.

The Elite kit stands out with its sleek black anodized finish and includes an additional return port, an upgraded fuel line, and enhanced machining to accommodate a wider range of applications, including the BMW S55 engine.

A port injection controller is not included. This is required for a complete installation.

Show More Show Less

Vargas Planetary OverDrive HPFP Upgrade - BMW N54

T#:51778140

Part#: PFS-POD-HPFP-UPG

Ships on Oct 21, 2026

$ 1,154.99 USD

Add to Wish List

Qty

$ 1,154.99 USD

Add to Wish List

This Planetary OverDrive system allows you to stick with your factory BMW high-pressure fuel pump while unlocking the flow needed for big-turbo builds.

E9X/E8X Bucketed Fuel Pump Upgrade - Double Shot

T#:590134

Part#: E90BUCKETSTKDS

Back Ordered

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

N55 Port Injection Kit With Intake Manifold, 950cc Injectors & Fuel L...

T#:42133542

Part#: BMW-N55-PRM-950

Back Ordered

$ 1,138.00 USD

Add to Wish List

Qty

$ 1,138.00 USD

Add to Wish List

Phoenix Racing N54 Port Injection Intake Manifold With 750cc Injector...

T#:44258354

Part#: BMW-N54PORT-750

Back Ordered

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts for BMW 3 Series E93 (2007-2013)

Sub-Categories

Port Injector Plugs

Bav Auto Fuel Level Sensor & Fuel Pump Lock Ring Tool - BMW & MINI ...

Bav Auto Fuel Injector Removal/Installation Tool - N55

Bav Auto Low Fuel Pressure Sensor - Multiple BMWs

Control Unit Fuel Pump - Priced Each

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel ...

Bav Auto Fuel Injector Seal Installer & Remover - N54/N63

BLACKLINE Performance Fuel Cap Cover

Fuel-It! Port Injection Kit With Intake Manifold, 950cc Injectors & F...

Bav Auto High Pressure Fuel Pressure Sensor - BMW N54 N63 S63 ...

Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Ch...

BLACKLINE Performance Fuel Cap Cover - Motorsport Blue

Stage 1 Low Pressure Fuel Pump Complete Inline Upgrade

E9X/E8X Bucketed Fuel Pump Upgrade - Single Shot

Fuel-It! Low Pressure Fuel Pump Upgrade Bucketless - N54/55 E-Series ...

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 1 - N54/55 E-Series ...

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N54/55 E-Series ...

N54 Dual Bucketless Fuel Pump Upgrade - "External Series"

Fuel-It! 650HP S65 E9X BMW M3 LPFP Upgrade - w/ 4PSI Hobbs Switch ...

Fuel-It! Flex Fuel Kit - N54/N55 E Chassis

Port Injection Kit

E-Chassis Stage 3 Bucketless LPFP Upgrade - N54/55

Fuel-It! Elite Port Injection Kit With 950cc Injectors & Fuel Line ...

Vargas Planetary OverDrive HPFP Upgrade - BMW N54

E9X/E8X Bucketed Fuel Pump Upgrade - Double Shot

N55 Port Injection Kit With Intake Manifold, 950cc Injectors & Fuel L...

Phoenix Racing N54 Port Injection Intake Manifold With 750cc Injector...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results