BMW Coilovers for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Sort By:

BC Racing - Corporate Logo
T#:47576361
Part#: I-153-ER
Back Ordered
$ 1,955.00 USD
Free Shipping
$ 1,955.00 USD
Free Shipping
The BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precede it, with the addition of more extensive real-world track testing. For racers and enthusiasts that are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.
Show More Show Less
BC Racing - Corporate Logo
T#:46753512
Part#: I-153-DS
Back Ordered
$ 1,415.00 USD
Free Shipping
$ 1,415.00 USD
Free Shipping
The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort.
Show More Show Less
BC Racing - Corporate Logo
T#:46409681
Part#: I-154-BR
Back Ordered
$ 1,215.00 USD
Free Shipping
$ 1,215.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
Show More Show Less

BC Racing - Corporate Logo
T#:47576359
Part#: I-154-RM
Back Ordered
$ 1,515.00 USD
Free Shipping
$ 1,515.00 USD
Free Shipping
The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.
Show More Show Less

BC Racing - Corporate Logo
T#:46409680
Part#: I-153-BR
Back Ordered
$ 1,215.00 USD
Free Shipping
$ 1,215.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
Show More Show Less
BC Racing - Corporate Logo
T#:46753509
Part#: I-154-DS
Back Ordered
$ 1,415.00 USD
Free Shipping
$ 1,415.00 USD
Free Shipping
The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort.
Show More Show Less

BC Racing - Corporate Logo
T#:47576362
Part#: I-154-ER
Back Ordered
$ 1,955.00 USD
Free Shipping
$ 1,955.00 USD
Free Shipping
The BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precede it, with the addition of more extensive real-world track testing. For racers and enthusiasts that are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.
Show More Show Less
Macht Schnell - Corporate Logo
T#:5351
Part#: TMS5351
Ships on Oct 26, 2026
$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:
  • The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required
  • Compatible with iDrive and non-iDrive systems
  • Easy 15-minute installation process with no wire cutting
  • Proper emulation of the EDC monitoring system
  • No dealer visits or coding required after installation
  • Completely removable at any time

    Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
    Will not work on vehicles equiped with BMW's Dynamic Drive system.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6
    2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:31390573
    Part#: 65030047
    Back Ordered
    $ 49.00 USD
    Free Shipping
    $ 49.00 USD
    Free Shipping

    BMW E36 E46 E9X Coil Spring Spacer - 50mm - Priced Each

    The BMW E36 E46 E9X Coil Spring Spacer - 50mm - Priced Each is designed to be used with KW/ST coilover systems, providing additional lift to your vehicle beyond the standard coilover adjustments. Each spacer is 50mm thick and is sold individually, with one required per coil.

    • Adds 50mm of additional height to your vehicle’s suspension.
    • Ideal for use with KW/ST coilover systems.
    • Helps achieve desired ride height when coilovers alone are insufficient.
    • Sold individually for custom fitment.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:51356045
    Part#: I-03-ZX
    Back Ordered
    $ 2,595.00 USD
    Free Shipping
    $ 2,595.00 USD
    Free Shipping
    For the E90/E92 enthusiast looking to bridge the gap between a high-end street car and a professional race machine, the BC Racing ZX Series offers an unparalleled level of feedback. By moving the compression valving to external canisters, the system effectively manages the heat generated during aggressive driving, maintaining valving accuracy and preventing "damper fade." The 3-way adjustment allows the driver to "dial in" the car for specific obstacles—for instance, softening high-speed compression to soak up aggressive track curbing while keeping low-speed compression firm for sharp turn-in response. Combined with standard front pillowball camber plates, this system eliminates factory rubber "mush," providing direct, unmediated steering feedback and allowing for aggressive alignment specs. Key Features: Triple-Valved Control: Precision adjustment of 30 clicks Rebound, 20 clicks Low-Speed Compression, and 12 clicks High-Speed Compression. Thermal Management: External canisters keep fluid away from hot brake components to ensure consistent lap times and drift consistency. Dual Piston Design: Combines the best characteristics of the DS and ER series for a broad range of damping authority. Motorsport-Grade Components: TIG-welded heavy-gauge steel shock bodies with black chrome finish and 6061-T6 aluminum components. Serviceable Construction: All components are individual and fully replaceable, ensuring the long-term serviceability of the system. Specifications: Vehicle Fitment: 2006–2011 BMW 3 Series E90 (Sedan) / E92 (Coupe) - Non-M Models. Spring Rates (Default): Front: 5.5 kg/mm | Rear: 9 kg/mm. Spring Type: High-strength SAE9254 cold-wound steel (Swift Spring upgrade available). Adjustability: Independent ride height, spring preload, and 3-way damping. Rebuildable: Fully rebuildable to original manufacturer specifications.
    Show More Show Less