BMW Intake Parts for BMW 3 Series E93 (2007-2013)

AFE Stage 2 Pro Dry S Intake System improves air flows over the factory components and isolates the intake tube and filter from underhood heat to keep intake air cooler and denser. Improved breathing increases power and torque. Kit includes filter, intake tube, and mounting hardware.

AFE Pro Dry S air filter uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe. High quality perimeter seal prevents filter bypass. Emissions legal in all 50 states.

The air filter must clean 8000-9000 gallons of air for each gallon of gasoline burned inside the engine, without restricting the air intake.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

Fits the Following BMWs:

E90 E92 E93 M3

Upgrade your BMW's air filtration system with Injen's state-of-the-art Ea nano-fiber performance dry filter. Developed by the Injen Technology Research and Development Team, this filter features a built-in velocity stack for enhanced performance. Designed to precise specifications, it ensures reliable performance without the need for oiling. With its advanced filtration technology, this filter provides superior airflow and durability, allowing for thousands of miles of clean and efficient engine operation.

• State-of-the-art Ea nano-fiber dry filter for optimal performance
• Built-in velocity stack enhances airflow and performance
• No oiling required for hassle-free maintenance
• Precision-engineered for a perfect fit and reliable performance
• Provides superior airflow and durability for long-lasting use

The Eventuri E9X M3 Carbon Fiber Plenum is crafted from 100% high-grade prepreg carbon, including the internal trumpets, replacing the stock plastic version. This upgrade enhances the acoustic experience of the naturally aspirated BMW V8 engine without impacting performance. Eventuri maintained the same internal volume as tuned by BMW to preserve the M3's power delivery characteristics.

While the carbon plenum doesn't offer a performance boost, it elevates the induction sound, transforming the M3's driving experience. The raw V8 rumble produced by the plenum imparts a CSL-like sound, creating an exhilarating driving sensation. Extensive testing with various carbon thicknesses has fine-tuned the sound, resulting in an astonishing induction volume and tone.

The Eventuri E9X M3 Carbon Fiber Plenum is compatible with both the OEM airbox and aftermarket intake systems. Pairing it with Eventuri's E9X M3 intake system unlocks genuine performance improvements.

Upgrade your N54/N55 performance effortlessly with this "OEM+" Intercooler from ECS Tuning! This premium intercooler is engineered to deliver superior cooling efficiency and increased horsepower without the hassle of extensive bumper/core support modifications.

Key Features:

Enhanced Core Depth: Featuring a robust aluminum bar and plate core, this intercooler ensures optimal heat dissipation for peak performance. Durable Construction: TIG-welded cast aluminum end tanks provide unmatched durability, replacing the factory's plastic components. Perfect Fitment: Designed to fit just like the OEM unit, it requires no additional brackets or modifications to the bumper or core support. Compatibility: Works seamlessly with OE charge pipes and pipe connectors for easy installation. Benefits:

Improved Cooling Efficiency: Significantly lowers intercooler outlet temperatures, ensuring your engine runs cooler and more efficiently. Increased Durability: Aluminum end tanks offer enhanced durability and longevity compared to factory plastic construction. Hassle-Free Installation: No need for trimming the front bumper or modifying the radiator support, making installation straightforward. Whether you're after increased performance or an OEM purist, the ECS Tuning OEM+ Intercooler is the perfect upgrade for your BMW. Enjoy the benefits of increased horsepower and lower temperatures with an easy, hassle-free installation.

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is a 1/2" (fits -8AN hos perfectly as well) CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run the vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.

This part fits the following BMW engines:
2006-2012 N54

Large 5-Layer Performance Air Filter:
This sealed intake system utilizes a pre-oiled, large 5" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

Roto-mold Tube:
This System uses CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.

Hassle-Free Installation:
All necessary hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

Also available is a Magnum FORCE Intake System Cover (P/N: 54-31918-B)

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicle.

This dual-cone intake for the 135/335/535 is similar to the enclosed carbon fiber intake but without the surrounding air box. If you love the look of the open filters and high-tech carbon fiber, this is the kit for you. High-flow cotton air filters connect to CAD engineered carbon fiber intake tubes for an improvement in air flow. The open filter layout releases more intake roar than the stock muffled intake.

135/335/535 ECS open DCI intake features -

• Designed and engineered using CAD technology for optimal flow and fitment
• Washable/reusable high flow cotton filters (pre-oiled)
• Stainless steel hardware
• Direct replacement for stock air box; integrates seamlessly with stock intake piping
• Beautiful and functional carbon fiber/e-fiberglass construction

Enhance your BMW driving experience with the Turner Motorsport E9X 335i (N55) Valved Catback Exhaust. Designed for hearty exhaust notes and improved performance, this exhaust system offers a subtle factory-like sound with closed valves and a menacing growl when opened. Crafted with Mandrel bent dual 2.5” 304SS pipes and a high-flow valved stainless steel muffler, it ensures efficient gas flow.

The kit includes Turner Mid Pipes, a Valved Exhaust, Muffler Valve Controller Kit, and engraved Exhaust Tips. Accuseal slip-fit joints simplify installation, making it a bolt-on replacement for the OE version. The full exhaust system is available as Axle Back, Cat-back, or a full Turbo back system, providing a dual-purpose solution for both your neighbors and your desire for volume.

Key Features:

• Mandrel bent dual 2.5” 304SS pipes with brushed finish
• Turner Engraved Polished exhaust tips
• High flow, valved, stainless steel mufflers
• Accuseal slip-fit joints for easy fitment
• Utilizes factory exhaust hangers

Doorbuster N55 Carbon Intake:

Upgrade your N55 engine with the Turner Carbon Intake, breaking away from common setups. The dual inlet design adds functionality without compromising engine bay aesthetics. Located in the "sweet spot," the second inlet maximizes airflow and lowers intake air temps. The bellmouth velocity stack design reduces turbulence for a satisfying flutter after throttle release. The carbon fiber airbox and intake tube feature a gloss clear coat for UV protection, offering a beautiful OEM+ upgrade.

Turner Carbon Fiber Intakes are CAD-designed, ensuring optimal airflow improvement over stock. The kit includes a Carbon Intake Tube, Full Carbon 2 Piece Airbox, Bellmouth Velocity Stack Cone Filter, Billet Turbo Inlet Adapter, Silicone Coupler, and Hardware for Installation.

Key Benefits:

• Increased flow over the factory intake
• Carbon fiber airbox and intake tube with gloss clear coat
• CAD-Designed for perfect integration
• Custom high-flow air filter
• Smooth interior carbon inlet tube for optimal airflow

Design Features:

Carbon Fiber Intake Tube:

• Smooth interior without corrugations for a streamlined flow path
• Integrated carbon flange for secure mounting
• 2x2 twill weave carbon fiber construction
• Gloss finish clear coat for UV protection
• 4-ply reinforced silicone coupler and 6061-T6 black anodized aluminum flange

Air Box:

• 2X2 twill weave carbon fiber construction
• Gloss finish clear coat for UV resistance
• Mounts in stock location with supplied hardware

Air Filter:

• Conical hi-flow reusable air filter
• 8 ply oiled cotton gauze construction
• Bellmouth (velocity stack) filter flange inlet for reduced turbulence and maximized flow

Large 3-Layer "Oil-Free" Performance air Filter:
This sealed intake system utilizes an oil-free, large 5" tall conical 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience.

Roto-mold Tube:
This System uses CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.

Hassle-Free Installation: 
All necessary hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

DETAILS:

• +16 HP / +26 lbs. x ft. Torque max gains
• Outflows factory intake by 32%
• Pro DRY S oil-free 3-Layer Progressively Finer Porosity Synthetic Media for Maximum Convenience
• CAD-Designed Roto-Molded Intake Tube
• No Cutting or Drilling on OEM Parts for Faster Installation

Also available is a Magnum FORCE Intake System Cover (P/N: 54-31918-B)

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicle.

This part fits the following BMWs:
E9X 335i 335xi

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

• Enhances vehicle performance
• Durable construction for long-lasting reliability
• Specifically designed for BMW vehicles

In addition to the weak stock chargepipe, the factory N54 diverter valves can also be a source for boost leaks. The diverter valve takes overboost and re-directs it back through the intake and turbos instead of allowing it to pass into the intake manifold. It's the same as a blow off valve (BOV) but instead of releasing into the engine bay, it stays contained to the engine. The stock diverter valves (DV) are plastic and connect with more plastic into the chargepipe and turbo inlet pipes. The plastic can become brittle and crack even on stock engines and leak boost, which leads to a loss in power and performance.

Turbosmart has developed two kits to replace and upgrade the stock diverter valves - a direct replacement kit and a combination DV/BOV "Dual Port" kit (shown). This Dual Port Kit is a DV and a BOV together in one unit. An internal valve directs some of the charged air into the turbo inlets and the rest is dumped into the engine bay like a traditional BOV. The amount of boost released into the air is determined by an internal spring in the Dual Port unit (additional springs are also available). This allows you to custom tailor how much boost and BOV "whoosh" you hear. In addition to the DV/BOV combo, stronger silicone hose is included to connect them to the turbo inlet pipes (Vargas silicone inlets are recommended). The Turbosmart Kompact Dual Port will give you all of the strength and reliability you need to take your turbo build to the next level.

You will also need T#553932