Please ensure your correct model is selected
Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.
In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!
Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!
Features:
An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.
In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.
MADE IN THE USA
**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**
Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.
Used for Pro 5 R filters
An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.
In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.
MADE IN THE USA
**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**
BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.
Upgrade your BMW's performance with the BMS N54 BOV Vacuum Adapter, a plug-and-play solution that enhances engine vacuum functionality. Easily attachable to the throttle body/brake booster vacuum line, this adapter provides two extra 1/8" NPT vacuum ports, offering versatile applications like replacing vacuum lines to diverter valves, connecting boost gauges, and more.
Enhance your BMW's performance and functionality with the BMS N54 BOV Vacuum Adapter – a versatile, plug-and-play solution made in the USA.
DETAILS:
This product was last offered at the strikethrough price on
01-28-2026
This Stage 2 cold air intake system produces 12 max horsepower, 16 lbs. x ft. torque and out-flowed the factory intake by 56%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.
This part fits the following BMWs:
2008-2013 E82/88 128i
2006 E90/91 325i/xi
2006 E90/91/92/93 330i/xi
2007-2013 E90/91/92/93 328i/xi
Upgrade your BMW N54 3.0L engine with the AFE Stage 2 Filter P5R MagnumFLOW IAF PRO 5R Air Filter. Designed to enhance airflow and filtration efficiency, this air filter ensures optimal performance for your vehicle. With its precise dimensions and high-quality construction, it's the perfect upgrade for your BMW's engine.
This product was last offered at the strikethrough price on
01-28-2026
Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.
This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:
E90 E92 E93 3 series: 325i 325Xi 328i 328Xi 330i 330Xi 2006+
E82 1 Series: 128i 2008+
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This Stage 2 cold air intake system produces 12 max horsepower, 16 lbs. x ft. torque and out-flowed the factory intake by 56%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.
This product was last offered at the strikethrough price on
01-28-2026
This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
Fits the Following BMWs:
E82 E88 135i N55
E90 E92 E93 335i 335xi N55
This Stage 2 Sealed Intake produces up to 12hp and 16lbs. x ft. torque and outflows the factory intake by 56%. Fully enclosed in a molded plastic housing. this air intake system features a reusable air filter that improves airflow for increased horsepower and torque. The housing features auxiliary inlet duct for better airflow as well as a black vacuum formed plastic cover that provides ready access to the filter for servicing. This intake system also features a insulated molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance.
This product was last offered at the strikethrough price on
01-28-2026
This unique intake system is designed to use the factory intake box to seal the intake tube and filter and tube against unwanted underhood temperatures while increasing air flow and velocity for optimum performance. This air intake system features either a ProDry S or Pro5R air (choose below), a dyno tuned intake tube and all the hardware necessary for an easy installation. This Stage 2 air intake system produces 12 horsepower, 9lbs. X ft. torque and out-flowed the factory intake by 41%. This system is truly a silent killer.
Choose the optional Carbon Fiber intake tube to reduce weight and enhance the visual appearance of the engine bay. The carbon fiber intake tube features a high gloss clear-coated 2 x 2 Twill Weave Carbon Fiber For Heat Protection, the tube is shaped to maintain factory fit and function.
Choose from Pro5R oiled filter for maximum flow or ProDry S oil-free filter media for maximum convenience.
Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media.
video: E9x M3 aFe Intake Installation
ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 Sedan
2008+ E92 BMW M3 Coupe
2008+ E93 BMW M3 Convertible
This product was last offered at the strikethrough price on
01-28-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.
In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.
MADE IN THE USA
**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**
Large 3-Layer "Oil-Free" Performance air Filter:
This sealed intake system utilizes an oil-free, large 5" tall conical 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience.
Roto-mold Tube:
This System uses CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.
Hassle-Free Installation:
All necessary hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
DETAILS:
Also available is a Magnum FORCE Intake System Cover (P/N: 54-31918-B)
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicle.
This part fits the following BMWs:
E9X 335i 335xi
This product was last offered at the strikethrough price on
01-28-2026
Unique One-Piece High-Quality Housing:
A custom CAD designed roto-molded housing made of black, cross-linked, heat resistant polyethylene material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The auxiliary air inlet allows for the maximum amount of air available for the intake.
High-Quality Tube:
This system uses a high-quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.
Large 5-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 4" flange and is 6-1/2" tall. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media for better air flow, and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.
Premium Hardware:
Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.
Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
This part fits the following BMWs:
2011-2013 E82/88 135i N55
2011-2013 E9X 335i N55
2011-2015 E84 X1 35i
Large 5-Layer Performance Air Filter:
This sealed intake system utilizes a pre-oiled, large 5" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.
Roto-mold Tube:
This System uses CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.
Hassle-Free Installation:
All necessary hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
Also available is a Magnum FORCE Intake System Cover (P/N: 54-31918-B)
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicle.
This product was last offered at the strikethrough price on
01-28-2026
This product was last offered at the strikethrough price on
01-28-2026
Looking to improve your intake without having to tear apart your engine bay? Then this drop-in performance air filter may be the perfect option for you! Allowing for much higher and easier air flow than the stock BMW filter, this filter allows your engine to breathe much easier at any RPM, freeing up horsepower and torque that normally would have been locked away.
Thanks to the direct replacement style of this filter, no modifications need to be made to the intake components. Just pull out your old filter, place this filter in the stock location, and enjoy!
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
01-28-2026
BMW Cold Air Intake System delivers more cool air to your BMW's engine, enhancing performance and producing an aggressive yet refined turbo whistle. Designed for significant performance improvements and ease of use, this intake system offers a range of benefits.
This product was last offered at the strikethrough price on
01-28-2026
Looking to upgrade your intercooler? This Phoenix Racing intercooler designed by Burger Motorsport is a great option that delivers better cooling, more power to the wheels, and allows you to hold that power longer during extended runs. A larger core and increased surface area dramatically improves cooling and reduces pressure drop. After extensive testing, this can allow your N54/55 powered BMW to gain around 10+peak wheel horsepower and during longer pulls and multiple runs, as much as 20-30whp over the factory intercooler.
Phoenix replacement intercoolers are a direct replacement for your factory intercooler and fully reversible. All required hardware is included.
Dimensions: 20" x 5.25" x 5.25"
