BMW Intake Parts for BMW 3 Series E93 (2007-2013)

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

BMW Cold Air Intake System delivers more cool air to your BMW's engine, enhancing performance and producing an aggressive yet refined turbo whistle. Designed for significant performance improvements and ease of use, this intake system offers a range of benefits.

• Dyno-Proven Gains: Increases power by up to +7 HP and torque by +14 Lbs. x Ft.
• Improved Airflow: Outflows the factory intake by 34% for better engine breathing.
• High-Performance Flow: Measures 605 CFM @ 7" H2O for efficient air delivery.
• Open-Element Design: Allows visibility of the large air filter while sealing when the hood is closed to prevent hot air ingress.
• Convenient Filter: Features a washable and reusable Pro DRY S air filter for easy maintenance.
• Easy Installation: Innovative filter-to-housing interface and minimal hardware ensure a quick and straightforward setup.

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

The VTT PCV Flapper delete is used to get rid of the factory flapper, and add a -10 fitting on N54 powered vehicles. This will allow you to run a single or dual external catch can, or your own custom set up.

This fitting is made from 6061-T6 aircraft aluminum anodized black and comes with O-ring, and a stainless steel holding clip.

This part fits the following BMW engines:
2006-2012 N54

The Eventuri E9X M3 Carbon Fiber Plenum is crafted from 100% high-grade prepreg carbon, including the internal trumpets, replacing the stock plastic version. This upgrade enhances the acoustic experience of the naturally aspirated BMW V8 engine without impacting performance. Eventuri maintained the same internal volume as tuned by BMW to preserve the M3's power delivery characteristics.

While the carbon plenum doesn't offer a performance boost, it elevates the induction sound, transforming the M3's driving experience. The raw V8 rumble produced by the plenum imparts a CSL-like sound, creating an exhilarating driving sensation. Extensive testing with various carbon thicknesses has fine-tuned the sound, resulting in an astonishing induction volume and tone.

The Eventuri E9X M3 Carbon Fiber Plenum is compatible with both the OEM airbox and aftermarket intake systems. Pairing it with Eventuri's E9X M3 intake system unlocks genuine performance improvements.

Want more power out of your N55? The Momentum GT Pro DRY S Cold Air Intake is the best system for creating power, airflow, and maximizing performance. This system provides a +16% air-flow increase over stock, allowing the car to breathe to its best ability. The Pro Dry S Filter is made of a 3-layer synthetic media, providing additional air flow and filtration. The Pro DRY S is convenient, as it requires no re-oiling when being cleaned.

• 400CFM Rating @ 7" Hâ‚‚O
• +12 HP and +14 lbs. x ft. Torque max gains
• Outflows factory intake by 16%
• High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Inlet
• CAD-Designed Roto-Molded Intake Tube
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Pro DRY S oil-free 3-Layer Synthetic Media for Maximum Convenience
• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
• No Cutting or Drilling on Factory Parts for Faster Installation

Unique One-Piece High Quality Housing:
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the air box.

High Quality Tube:
This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.

Large 3-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3/4" x 4-3/4") flange and is 9" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.

Premium Hardware:
Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
E9X 335i, 335xi

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

This is a 1/2" (fits -8AN hos perfectly as well) CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run the vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi.

This part fits the following BMW engines:
2006-2012 N54

K&N's drop-in air intake filter is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance drop-in intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase! 

K&N's drop in air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

• Covered by the K&N Million Mile Limited Warranty
• Washable and reusable
• Emissions legal in all 50 states
• Will not void vehicle warranty

K&N drop-in air filter for 335i and 335xi (E90, E91, E92, E93 chassis), 135i (E82 E88 chassis) and 2007-2010 535i & 535xi (E60 chassis). This filter drops into the air box in minutes, just as the stock air filter element does.

This K&N air filter fits the following BMWs::
2008-2010 E82/E88 1 series 135i
2011 E82 1 series 1M
2007-2010 E90 3 series sedan - 335i and 335xi sedan (N54)
2007-2010 E92 3 series coupe - 335 & 335xi coupe
2010+ E92 3 series coupe - 335is
2007-2010 E93 3 series convertible - 335i convertibles
2007-2010 E60 5 series 535i & 535xi turbo sedan

Large 3-Layer "Oil-Free" Performance air Filter:
This sealed intake system utilizes an oil-free, large 5" tall conical 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience.

Roto-mold Tube:
This System uses CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.

Hassle-Free Installation: 
All necessary hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

DETAILS:

• +16 HP / +26 lbs. x ft. Torque max gains
• Outflows factory intake by 32%
• Pro DRY S oil-free 3-Layer Progressively Finer Porosity Synthetic Media for Maximum Convenience
• CAD-Designed Roto-Molded Intake Tube
• No Cutting or Drilling on OEM Parts for Faster Installation

Also available is a Magnum FORCE Intake System Cover (P/N: 54-31918-B)

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicle.

This part fits the following BMWs:
E9X 335i 335xi