Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your N52/N54 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install

If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Product Features:

Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

Upgraded or replacement silicone heater hose for our N54 expansion tank relocation kits.

60" silicone performance coolant hose featuring a molded 90-degree bend for installs with space constraints.

Features and benefits:

Constructed of 4-Ply reinforced silicone for improved durability over the failure-prone rubber hoses.
Reduced thermal conductivity
Improved resistance to ozone and UV degradation for improved performance and durability.
Turner branded

BMW is well-known for its problematic cooling systems, which are often a catalyst for irreversible engine damage and a hefty repair bill. The coolant expansion tank, a crucial component responsible for holding hot engine coolant under high pressure, is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory E90 M3 expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.

With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for E90 M3 owners: a heavy-duty expansion tank built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, Turner’s design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!

To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.

Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your E46 M3 today and drive with confidence!

Features & Benefits:

Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure.
Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion.
Factory Coolant Capacity Retention: Maintains the same coolant level as the original design.
Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator.
Internal Baffles: Prevent the introduction of air pockets during high-performance driving.
Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections.
Kit Includes:

Turner Motorsport Aluminum Expansion Tank
Performance Silicone Coolant Overflow Hose
Expansion Tank Cap
Billet coolant bleeder screw
Coolant Level Sensor
Product Development:

Our Heavy Duty Aluminum Expansion Tank was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Installation:

- Click HERE for Installation Instructions -

Track-tested and street-ready. the ULTIMATE cooling system upgrade for your N54 or N55!

Ditch your failure-prone plastic end tanks and increase cooling capacity by 25%, all without modifying your core support or accompanying shrouds. The CSFxTurner Performance Triple-Pass Radiator is the best cooling system upgrade for your N54/N55-equipped BMW!

The BMW 135i and 335i deliver serious performance straight from the factory, thanks to the twin-turbocharged N54 and single-turbo N55 engines. With strong midrange torque, high-revving capabilities, and proven tuning potential, these engines punch well above their weight. However, while the powertrain excels, the factory cooling system often falls short, especially under sustained boost or track conditions. Heat soak, rising coolant temps, and long-term thermal stress are common issues for enthusiasts pushing their N54 or N55 hard, making a performance radiator an essential upgrade for reliability and consistency.

Recognizing the critical need for increased cooling capacity, the team at Turner Motorsport partnered with CSF Race, world leaders in high-performance cooling systems with over 50 years of experience. The result is an Upgraded Performance Radiator: a high-performance, motorsport-grade upgrade engineered to keep your N54/N55 cooler and on the track for longer.

Design:

CSF-Exclusive "B-Tube" Technology
Unlike conventional "O-tube" designs, CSF’s patented "B-tube" structure increases wall strength while creating a more efficient flow path. This alone accounts for a 15% increase in cooling capacity over an OE "O-tube" radiator!
Dual Core Design
2-Row 42mm Core (Dual Core) Featuring CSF's Exclusive B-Tube Technology
Two-Row Compact Structure
This radiator was designed with precise fitment in mind. While total tube count and size are increased, the overall radiator dimensions stay the same as OE, ensuring a drop-in fit with zero modifications required.
25% Increase in Cooling Capacity
All of the above design features translate to a massive 25% cooling increase over the stock radiator!
FEATURES & BENEFITS

Direct-fit upgrade, no modifications required!
Accepts all OEM attachments via CNC-machined "Quick-Connect" hose ends and accessory mounting provisions
TIG-welded aluminum construction provides increased durability
An all-aluminum drain plug replaces the weak OE plastic unit, ensuring seamless functionality for the life of the radiator
Increased cooling efficiency for high-performance and racing use
Aluminum drain plug
Designed and tested by Turner Motorsport in collaboration with CSF Race
Backed by the Turner Lifetime Replacement Program
Every unit features precision CNC-machined brackets and OE-style connections for a seamless, drop-in installation using factory or aftermarket hoses. Whether you're building a track weapon or a high-horsepower street car, this Turner x CSF radiator is the cooling solution your N54 or N55 needs to perform reliably under pressure. All backed by the Turner Lifetime Replacement Program.

Why not upgrade when you're due for a replacement? The ECS Tuning silicone hose replacement fixes these issue with two key features in their design. Offering this hose in a much more heat resistant silicone instead of OE rubber and having the hose wrapped in aluminum. The aluminum coating acts as a heat shield to further protect the silicone as well as reducing the temperatures forced on the coolant running through the hose. 

Replaces OE hose #11537545665

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, this ECS Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, ECS hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Key Benefits:

Direct OE Fitment – Perfectly molded to factory specifications for seamless installation. Enhanced Durability – Heat-resistant silicone prevents cracking, swelling, and deterioration over time. Superior Cooling Performance – Smoother internal passageways improve coolant flow and system efficiency. Pre-Installed Quick-Connect Fittings – Hassle-free installation with OEM-style connectors. Premium Hardware Included – Comes with German-style stainless steel worm-drive hose clamps for a secure fit. Kit Includes:

Upper Radiator Hose Lower Radiator Hose Pre-Installed Factory "Quick-Connect" Flanges (4) Stainless Steel Worm-Drive Hose Clamps (4) Replaces OEM Part Numbers: 17127531579 & 17127564478

Ensure your BMW's cooling system stays in top shape with ECS Tuning's Billet Aluminum Radiator Drain Plug. Designed specifically for late-model 1-Series and 3-Series BMWs, this replacement plug addresses the common issue of weak plastic drain plugs. Constant exposure to engine heat and road debris makes the plastic plugs brittle, leading to frustration with broken plugs. ECS Tuning's billet aluminum alternative puts an end to these problems.

• Durable Replacement: Say goodbye to weak plastic drain plugs.
• Enhanced Material: Billet aluminum provides superior strength and longevity.
• Deeper Screw Head: Accommodates Phillips head or flat head screwdrivers for better engagement.
• Reduced Stripping Risk: Minimize the chance of stripping out the screw head.

Don't let cooling system maintenance be a hassle. Order ECS Tuning's Billet Aluminum Radiator Drain Plug now and experience worry-free service.

Ensure a tight and leak-free seal in your BMW's cooling, vacuum, or intake systems by installing a new adjustable hose clamp. Over time, clamps can deform or lose their tightness due to aging or frequent removal, potentially causing leaks in your coolant or vacuum hoses. Avoid the risk of leaks by replacing old clamps with new hardware, offering peace of mind against coolant and vacuum system issues.

Key benefits of the adjustable hose clamp include:

• Maintaining a secure and leak-free seal in your BMW's systems.
• Preventing coolant or vacuum leaks that can affect performance.
• Adjustable size from 70mm to 78mm for versatile applications.

Upgrade your hose clamps to ensure optimal performance and reliability in your BMW's systems.

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, this ECS Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, ECS hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Key Benefits:

Direct OE Fitment – Perfectly molded to factory specifications for seamless installation.
Enhanced Durability – Heat-resistant silicone prevents cracking, swelling, and deterioration over time.
Superior Cooling Performance – Smoother internal passageways improve coolant flow and system efficiency.
Premium Hardware Included – Comes with German-style stainless steel worm-drive hose clamps for a secure fit.
Kit Includes:

Upper Radiator Hose
Lower Radiator Hose
Stainless Steel Worm-Drive Hose Clamps (4)
Replaces OEM Part Numbers: 17127599450 & 17127540127. Can be used with your factory connectors.

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, this ECS Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, ECS hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Key Benefits:

Direct OE Fitment – Perfectly molded to factory specifications for seamless installation.
Enhanced Durability – Heat-resistant silicone prevents cracking, swelling, and deterioration over time.
Superior Cooling Performance – Smoother internal passageways improve coolant flow and system efficiency.
Pre-Installed Quick-Connect Fittings – Hassle-free installation with OEM-style connectors.
Premium Hardware Included – Comes with German-style stainless steel worm-drive hose clamps for a secure fit.
Kit Includes:

Upper Radiator Hose
Lower Radiator Hose
Pre-Installed Factory "Quick-Connect" Flanges (4)
Stainless Steel Worm-Drive Hose Clamps (4)
Replaces OEM Part Numbers: 17127599450 & 17127540127

The N5X family of engines marked the start of a new era for BMW. The all-new aluminum block powerplants featured a host of technical upgrades, aiding in power output, reliability, and performance. Among these technological advances is an external electronic water pump, which removed load from the engine's accessory drive and allowed for advanced pulse-width-modulated (PWM) control.

From factory, the N52's electronic water pump is limited to a measly 200W output—strong enough for daily driving, but lacking in performance applications. Recognizing this shortcoming, ECS engineers set out to create a high-flow water pump upgrade that doesn't break the bank. Their high-quality adapter wiring harness and bracket allow you to install a 400W N54 water pump without any modification, an effortless, yet effective upgrade that doubles the output of the factory water pump!

By increasing coolant flow capacity, the 400W pump improves heat extraction from the cylinder head and engine block during high-load operation. This added thermal headroom is particularly beneficial for modified engines, sustained aggressive driving, track use, or operation in elevated ambient temperatures where the factory pump can operate near its limits. Improved circulation helps maintain more stable coolant temperatures and reduces the risk of localized hot spots.

Features & Benefits:

Upgrades to the more powerful 400W N54 water pump for increased coolant flow and improved engine cooling efficiency Sealed adaptor harness ensures secure connections and optimal operation under demanding conditions The N54 pump's higher power output offers longer-lasting, more effective cooling compared to the stock N52 pump Design:

40A fused power wire safely handles the increased power demands of the N54 pump, providing consistent and stable performance Sealed and robust construction, designed to withstand heat and moisture, ensuring reliability in even the most challenging environments Plug-and-play compatibility is designed for easy integration with the N52 engine and N54 water pump, minimizing installation time and complexity Kit Contents:

ECS N54 Water Pump Adapter Kit Conversion wiring harness Aluminum bracket Installation hardware Bavarian Autosport Water Pump (11517632426)

The perfect upgrade for your connection between your thermostat and cylinder head. Designed using durable silicone and billet aluminum to greatly outlast the OE rubber and plastic combination.

Some of the weakest point of the cooling systems in BMW's can come down to the OE plastic fittings breaking down from the constant changes in temperature softening these plastic components. When this happens even simply moving the hose slightly could cause the fitting to crack causing the coolant to leak all over. The ECS design silicone hose with billet aluminum adapter retains OE fitment with superior strength to not only handle the performance, but stand up to the wear and tear of a daily driver.

Features: 

• Manufactured from billet 6061-T6 with type III anodize for exceptional durability and corrosion resistance.

  • Much stronger part than OEM plastic

  • Will not become brittle and fatigue over time due thermal cycling.  This will prevent the part from breaking during removal and re-installation.

• Constructed of 4-Ply reinforced silicone for improved durability over the failure prone OE rubber hose.
• Flourosilicone lined internal layer for exceptional chemical resistance.
• Silicone offers reduced thermal conductivity as well as improved resistance to ozone and UV degradation for improved performance and durability.
• Follows OEM form for perfect fitment.
• Utilizes OEM O-ring 11537545278 to ensure a proper seal.

Upgrade your BMW with ECS Tuning's Stainless Steel Hose Clamps, designed for convenience and durability. With various band widths and German-style T-bolts, these clamps offer easy adjustment to your required diameter. Say goodbye to dealer pricing and enjoy the quality you love at ECS Tuning.

• Full stainless steel construction
• Various band widths available
• German-style T-bolts for easy adjustment
• Convenient solution for hose clamp replacement

ECS Tuning 304 Stainless Steel Hose Clamps

Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.

• Made from high-quality 304 stainless steel for durability
• German-style design with T-bolts allows for easy size adjustment
• Various band widths for versatile use
• Avoid dealership pricing without compromising on quality
• Perfect for BMW enthusiasts seeking affordable yet reliable hose clamps

ECS Tuning Stainless Steel Hose Clamps for BMW

Upgrade your BMW's hose clamps with ECS Tuning Stainless Steel Hose Clamps, designed for convenience and durability. Say goodbye to long waits and overpriced dealership clamps. With various band widths available, these stainless steel clamps ensure a secure fit for your vehicle's hoses.

Benefits:

• Convenient replacement for worn-out hose clamps
• Made of durable stainless steel for long-lasting performance
• Available in various band widths for versatile use
• Affordable alternative to dealership pricing

Hose Clamp 2 5/16" - 3 1/4"

Ensure secure hose connections with the Hose Clamp 2 5/16" - 3 1/4", a versatile and reliable solution for various applications. Crafted from durable materials, this clamp offers superior strength and corrosion resistance. Its adjustable design allows for a snug fit, reducing the risk of leaks and ensuring optimal performance. Upgrade your hose connections with the precision and reliability of the Hose Clamp 2 5/16" - 3 1/4".

• Versatile and reliable solution for various applications
• Superior strength and corrosion resistance
• Adjustable design for a snug fit
• Reduces risk of leaks for optimal performance

Includes connector housing with terminals and seals. Commonly used for the coolant level sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 61132359999 - Commonly used for the coolant level sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943