BMW Engine Parts for BMW 7 Series F02 (2009+)

OEM Delphi Ignition Coil - N20 N52 N54 N55 S55 S54 N62 S62 M54 ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:14742

Part#: 12138616153

In Stock

$ 47.99

This product was last offered at the strikethrough price on
07-27-2026

$ 28.65 USD

Add to Wish List

Qty

$ 28.65 USD

Add to Wish List

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors).

Show More Show Less

BMW Ignition Coil with Spark Plug Connector (ELDOR)

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:641259

Part#: 12138657273

In Stock

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Used in a wide variety of BMW engines to ensure proper spark plug operation.

Eldor Ignition Coil - 12138616153

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:29234309

Part#: 12138616153

In Stock

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the current replacement for some BMW 6 and 8-cylinder engines built in the late 2000s and after. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. It's listed as a replacement coil for N20, N55, and S55 engines. In March 2015 BMW approved it for N51/N52 engines. This part number replaces the previous BMW part number 12137594937 for the cars listed below.

Sold per coil. Includes boot and connector.

Show More Show Less

ECS Tuning Magnetic Oil Drain Plug - M12x1.5

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:361057

Part#: 002201ECS01A

In Stock

Sale - Save 25% $ 38.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 38.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.24 USD

Add to Wish List

Turn your oil drain plug into an effective metal particle filter! This drain plug fits virtually all BMWs, and has a SUPER strong magnet built into it's tip, trapping iron and steel contaminants and safely removing them from the circulation.

Show More Show Less

BMW N55 NGK Performance Iridium Spark Plug Set

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
We Price Match - Give Us A Call or Chat!

T#:568296

Part#: 97506KT

In Stock

$ 113.99 USD

Add to Wish List

Qty

$ 113.99 USD

Add to Wish List

NOTE: For the N54, these plugs are 2 Steps Colder, while for the N55 they are only 1 Step Colder. When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!

Show More Show Less

Valvetronic Actuator Replacement Kit - BMW N55 S55 3.0L

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:599759

Part#: 11377603979KT2

In Stock

Sale - Save 10% $ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD

Add to Wish List

Qty

Sale - Save 10%

$ 268.99

This product was last offered at the strikethrough price on
05-03-2026

$ 241.95 USD

Add to Wish List

Includes actuator, actuator gasket and valve cover gaskets

BMW N63/S63 4.4L NGK Performance One-Step Colder Spark Plug Set - ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
We Price Match - Give Us A Call or Chat!

T#:587466

Part#: 97506S8KT

In Stock

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!

Show More Show Less

Oil Filter Housing Gasket KIT

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:637846

Part#: 1142753729312KT1

In Stock

Sale - Save 5% $ 97.99

This product was last offered at the strikethrough price on
08-17-2026

$ 93.49 USD

Add to Wish List

Qty

Sale - Save 5%

$ 97.99

This product was last offered at the strikethrough price on
08-17-2026

$ 93.49 USD

Add to Wish List

Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

NGK Performance Iridium Two-Step Colder Spark Plug Set - BMW N54 3.0L...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
We Price Match - Give Us A Call or Chat!

T#:568293

Part#: 97506

In Stock

$ 113.88 USD

Add to Wish List

Qty

$ 113.88 USD

Add to Wish List

When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!

Show More Show Less

BMS N54 Upgraded Replacement PCV Valve For BMW

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:38587650

Part#: N54PCVVR

Back Ordered

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

The BMS N54 Upgraded Replacement PCV Valve is a high-performance upgrade designed to enhance crankcase ventilation and minimize excessive blow-by in BMW N54 engines. Unlike the stock PCV valve, which can degrade over time and lead to oil consumption or boost leaks, this upgraded version provides superior sealing and long-term durability. ### Key Features: - **Direct-Fit Replacement** – Designed for an exact fit, ensuring hassle-free installation. - **Optimized Ventilation** – Improves crankcase pressure management, reducing oil blow-by and deposits. - **Enhanced Durability** – Constructed from premium materials to withstand high-boost applications and prolonged use. - **Boost Leak Prevention** – Delivers a tighter seal than the factory valve, preventing power loss. - **Ideal for Tuned Engines** – A critical upgrade for N54-powered vehicles running increased boost levels. Upgrade your N54’s crankcase ventilation system with the BMS Upgraded PCV Valve to ensure maximum performance, reliability, and engine longevity.

Show More Show Less

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Oil Filter Housing Gasket Kit

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:5403248

Part#: 11427537293TMSKT

In Stock

Sale - Save 5% $ 97.99

This product was last offered at the strikethrough price on
08-18-2026

$ 93.49 USD

Add to Wish List

Qty

Sale - Save 5%

$ 97.99

This product was last offered at the strikethrough price on
08-18-2026

$ 93.49 USD

Add to Wish List

Includes gaskets and hardware to replace both oil filter housing gaskets. Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

NGK Performance Iridium One-Step Colder Spark Plug Set - BMW N54 3.0L...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
We Price Match - Give Us A Call or Chat!

T#:376669

Part#: N54PLUGKT

In Stock

$ 125.99

This product was last offered at the strikethrough price on
09-09-2026

$ 110.99 USD

Add to Wish List

Qty

$ 110.99 USD

Add to Wish List

When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring. There are two rules that most people tend to go by when deciding on which spark plugs to buy: The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs. The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel. Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions. We suggest talking to your engine builder or tuner before making the change, or you can call our Turner Motorsport sales staff to discuss what modifications have been made to your vehicle and see if these plugs are right for you!

Show More Show Less

VANOS Solenoid Valve Kit - N52 N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:25805743

Part#: 11367585425TKT

In Stock

Sale - Save 25% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD

Add to Wish List

Qty

Sale - Save 25%

$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD

Add to Wish List

Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.

Show More Show Less

Billet Oil Filter Cap

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

N-Series Ultimate Performance Ignition Coil - Red - Set Of Six ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:23714967

Part#: NSERIESIGNCOILKT

In Stock

$ 205.99 USD

Add to Wish List

Qty

$ 205.99 USD

Add to Wish List

Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.

Show More Show Less

-10AN ORB X 3/4" Hose Barb Fitting Assembly

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:584114

Part#: 003779ECS10

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD

Add to Wish List

Elevate your custom installation with the ECS -10AN O-Ring Boss fitting, a crucial component that connects your ECS Tuning Catch Can to a 3/4" ID hose. This fitting simplifies your plumbing setup, ensuring a seamless solution.

Featuring a pre-installed Viton O-ring, this fitting is engineered for excellence, providing a leak-proof seal that resists the effects of oil and fuel exposure, guaranteeing long-term durability.

The 3/4" nipple is thoughtfully designed with barbs to secure hose position effectively, minimizing the risk of hose disconnection. Keep in mind that clamps and hoses are available for separate purchase. These fittings are sold individually, with most installations requiring a pair of them.

Show More Show Less

Ultimate Turbo Coolant Line Kit - BMW F01/02 F07/10 F06/12/13 N63 4.4...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:21702986

Part#: F0XF1XCOOLANTKT

In Stock

Sale - Save 26% $ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 203.11 USD

Add to Wish List

Qty

Sale - Save 26%

$ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 203.11 USD

Add to Wish List

Elevate your F0X / F1X turbocharger performance and reliability with the Packaged by Turner Kit, meticulously designed to cater to your needs. Benefit from Enhanced Turbocharger Functionality: Improved Cooling: Our Turbocharger Coolant Supply and Return Lines are engineered to enhance coolant circulation, effectively regulating turbocharger temperatures for optimal performance. Precision Fit: Included gasket rings and hose clamps guarantee a snug and secure fit, preventing leaks and ensuring the longevity of your turbocharger system. Enhanced Reliability: By preventing coolant leaks and maintaining consistent temperatures, our kit promotes the reliability and durability of your turbocharger system, ultimately extending its lifespan. Kit Includes: Turbocharger Coolant Return Line - Cylinders 1-4 Turbocharger Coolant Supply Line - Cylinders 1-4 Turbocharger Coolant Return Line - Cylinders 5-8 Turbocharger Coolant Supply Line - Cylinders 5-8 8 Gasket Ring 3 Hose Clamp This kit fits these BMW models: F01/F02 - 750i, 750Li F06/F12/F13 - 650i F07/F10 - 550i

Show More Show Less

VTT N54 Crank Bolt Capture - N54

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:557938

Part#: VTT-N54-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice.

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

1x Aluminum Crank Bolt Capture
8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54

Show More Show Less

Oil Pan Gasket - With Bolts

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:5403247

Part#: 11132210959TMSKT

In Stock

$ 83.40 USD

Add to Wish List

Qty

$ 83.40 USD

Add to Wish List

Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Precision Raceworks Ethanol 360 Fittings - 5/16" (7.89mm)

Universal Product - Please confirm your fuel line size prior to ordering

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:37757295

Part#: 601-0240

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Port Injector Plugs

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Spark Plug Gapper Tool BMS Billet

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

N54 Valve Cover Upgrade Kit - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:25772568

Part#: 11127565284MTKT

In Stock

Sale - Save 23% $ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD

Add to Wish List

Qty

Sale - Save 23%

$ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD

Add to Wish List

The stock plastic valve cover from BMW tends to warp and crack over time due to numerous heat cycles. This leads to oil and vacuum leaks that both make a mess and negatively affect performance and reliability. Replace your stock valve cover with this aluminum upgrade from Bremmen Parts to eliminate these issues! The aluminum construction results in a significantly stronger valve cover that won't warp or crack. This kit contains everything you need to upgrade your cover, including the upgraded aluminum valve cover, valve cover gasket, oil cap, and hardware. Additionally, we've also included a new PCV blow-by hose and a Vargas PCV upgrade for additional reliability! This is especially important for tuned vehicles with upgraded turbos.

Show More Show Less

N54 Integrated Oil Pressure Sensor Kit

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:12053507

Part#: N54OILSENSOR

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

In the past adding an oil pressure sensor to your N54 required over $250 in gauges, t-blocks, adapters, hoses & wires.

Precision Raceworks Replacement Ignition Coil - Blue

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:4333508

Part#: 201-0091

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Replaces individual coils found in the Precision Raceworks Ignition Kit.

OEM Accessory Belt Service Kit - N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:554448

Part#: N54ACCKT

Ships in 4 Business Days

Sale - Save 16% $ 187.99

This product was last offered at the strikethrough price on
10-19-2026

$ 158.57 USD

Add to Wish List

Qty

Sale - Save 16%

$ 187.99

This product was last offered at the strikethrough price on
10-19-2026

$ 158.57 USD

Add to Wish List

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Belt - N55 F Chassis ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:5858461

Part#: 8PK1390

Ships on Feb 23, 2027

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

Replaces BMW # 11287628661 Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts.

Show More Show Less

ECS Billet Aluminum Oil Filter Housing Cap - N20 N52 N54 N55 S55 S58 ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:363147

Part#: 003296ECS01

Ships in 2 Business Days

Sale - Save 25% $ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD

Add to Wish List

BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove.

Turner Universal Baffled Oil Catch Can Mounting Bracket Kit - BMW & M...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:383333

Part#: 003779ECS06KT

In Stock

Sale - Save 25% $ 95.99

This product was last offered at the strikethrough price on
06-13-2026

$ 71.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 95.99

This product was last offered at the strikethrough price on
06-13-2026

$ 71.99 USD

Add to Wish List

If you don't wish to fabricate intricate brackets to mount your ECS Baffled Oil Catch Can we have the solution. ECS's three-piece bracket kit includes two options for securing the catch can. Choose from either a flat parallel mounting plate or a bent 90° mounting plate to give you 360° rotation for an infinitely adjustable mounting location.

Show More Show Less

ECS Tuning Thermostat Cover Upgrade Kit - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:6924312

Part#: 090744ECS09

Back Ordered

Sale - Save 15% $ 79.99

This product was last offered at the strikethrough price on
06-14-2026

$ 67.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 79.99

This product was last offered at the strikethrough price on
06-14-2026

$ 67.99 USD

Add to Wish List

This ECS Tuning Anodized Aluminum Thermostat Cover Plate is a simple way to add a bespoke look to your engine bay. If you have replaced your oil thermostat or deleted your cooler, now is the perfect time for this mod. Installs in minutes and ensures a positive seal for the oiling system. Features: Anodized Black Includes hardware and seal Heatsink fins for added cooling

Show More Show Less

Boost Solenoid/Pressure Converter - Kit - N54, N63

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:5416756

Part#: 11747626350TMSKT

In Stock

Sale - Save 43% $ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 233.69 USD

Add to Wish List

Qty

Sale - Save 43%

$ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 233.69 USD

Add to Wish List

Kit includes both boost solenoids, vacuum hose and T fitting for a easy leak free install

GoldenWrench BLACKLINE Performance Oil Filter Housing Cap

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:7244442

Part#: FXXOFH-R

In Stock

$ 147.00 USD

Add to Wish List

Qty

$ 147.00 USD

Add to Wish List

OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Performance RED Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 3/8" (9.49mm)

Universal Product - Please confirm your fuel line size prior to ordering

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:37892104

Part#: 601-0288

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:38161701

Part#: 101-0257

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

6-micron filtration – Removes fine particles and contaminants to protect engine components
High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
Optimized fuel flow – Maintains consistent fuel delivery for peak performance
Durable construction – Engineered for long-lasting reliability in high-demand applications
Easy replacement – Simple installation for routine maintenance
Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as needed
Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less

BMW Gray Filter Housing Cap - Blackline Performance Edition Oil ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:9901260

Part#: FXXOFH-G

In Stock

$ 147.00 USD

Add to Wish List

Qty

$ 147.00 USD

Add to Wish List

BMW Gray Filter Housing Cap - Blackline Performance Edition Oil is a premium upgrade designed to replace the standard OEM plastic oil filter housing cap. This high-quality billet aluminum cap enhances both the aesthetics and functionality of your BMW's engine.

Durable Construction: Made from 6061 T6 aluminum with a hard anodized finish for superior strength and longevity.
Improved Performance: Features better heat dissipation compared to the factory plastic cap, enhancing engine performance and reliability.
Enhanced Aesthetics: Adds a sleek, high-performance look to your engine bay with 3D precision post-milled detailing and the G Insignia Oil Filter Cage Stabilizer.
Easy Installation: CNC-formed hand grips and a 10mm Allen key maintenance port with a built-in scratch plate simplify the installation and maintenance process.
Direct Replacement: Retains the factory oil filter stalk and is compatible with BMW S55 and most N series engines using BMW part 11427525334.
Increased Longevity: Designed to increase the life span of your oil filter cap and provide a more reliable seal.

Show More Show Less

B58 Ignition Coil Upgrade Adapter Kit - N55/S55

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply
Not forsale in the state of California!

T#:6811828

Part#: ICU-NS55-N5-PL

Ships in 2 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

Does not include ignition coils. To mount the B58 coils onto the N55 & S55 engine the folks at Nexsys developed billet aluminum brackets that are Made in the USA.

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:38094311

Part#: 201-0188

In Stock

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55 is designed for seamless compatibility with most aftermarket intake manifolds featuring top mount port injection. It works with leading brands such as Black Market Parts, BKC, BMS, Sharp Custom, Doc Race, and more, ensuring a high-performance fuel delivery solution for BMW N54 and N55 engines.

Constructed with premium 6061 aluminum and anodized for 100% E85 compliance, this fuel line is engineered for durability and optimal fuel flow. The female quick connectors feature an air hose-style quick connect with dual seals (primary and secondary) to eliminate any risk of fuel leaks. Precision Raceworks utilizes Smooth Bore PTFE hose, a trusted component in high-end E85 applications worldwide.

This plug-and-play solution is fully compatible with both factory and aftermarket fuel lines, providing an easy, reliable way to supply fuel to the port injection system of your upgraded intake manifold.

Seamless fit – Compatible with most aftermarket top mount port injection manifolds
Durable construction – Machined from 6061 aluminum and anodized for E85 compatibility
Leak-proof design – Dual-seal quick connectors for maximum fuel safety
High-performance fuel delivery – Utilizes Smooth Bore PTFE hose for optimal flow
Easy installation – Direct plug-and-play with factory and aftermarket fuel lines

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:38161736

Part#: 201-0405

Ships in 1-2 days

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

N54 Valve Cover upgrade kit

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:6196925

Part#: 11127565284TKT

Ships in 2 Business Days

Sale - Save 23% $ 423.99

This product was last offered at the strikethrough price on
05-03-2026

$ 326.59 USD

Add to Wish List

Qty

Sale - Save 23%

$ 423.99

This product was last offered at the strikethrough price on
05-03-2026

$ 326.59 USD

Add to Wish List

You want to keep your N54 running properly to enjoy the drive and justify the costs associated with owning an N54 car! This kit has a replacement valve cover for your current cover that is worn or damaged. Along with replacing the valve cover this kit includes an upgraded pcv valve. This upgraded PCV valve uses machined metal components in place of the stock plastic parts, resulting in a more durable part. While replacing your valve cover a common failure is one of the blow by pcv vent hose cracks and is also INCLUDED in the kit for a full proof valve cover upgrade service! Replace and upgrade your valve cover at the same time, with the VTT PCV valve for longer PCV life and better flow.

Show More Show Less

Genuine BMW Oil Change Kit / Inspection I - N52, N54, N55

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:15511870

Part#: 832123659460KT

In Stock

$ 132.86 USD

Add to Wish List

Qty

$ 132.86 USD

Add to Wish List

This oil change kit has everything you need for an easy oil change, including seven liters of oil, an oil filter, and a drain plug.

High-Performance Ignition Service Kit - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:583535

Part#: N54PISKT1

In Stock

Sale - Save 18% $ 279.99

This product was last offered at the strikethrough price on
05-03-2026

$ 228.29 USD

Add to Wish List

Qty

Sale - Save 18%

$ 279.99

This product was last offered at the strikethrough price on
05-03-2026

$ 228.29 USD

Add to Wish List

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This kit contains: 6 BOSCH Spark Plugs 6 Bavarian Autosport Ignition Coils 1 Dielectric Spark Plug Boot Protector - 4 Gram Packet

Show More Show Less

Blackline Performance Edition Blue Oil Filter Housing Cap

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:11366500

Part#: FXXOFH-B

Ships in 5 Business Days

$ 147.00 USD

Add to Wish List

Qty

$ 147.00 USD

Add to Wish List

OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Motorsport Blue Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.

Show More Show Less

N54 Replacement Spark Plug Wires - 6pk, Blue, Short (Factory Location...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:25374610

Part#: 201-0003

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Precision Raceworks BMW N54 Factory Location Replacement Spark Plug Wires are the same high-quality wires featured in our acclaimed BMW N54 High-Performance Ignition Kit. Engineered with low-resistance, high-performance technology, these spark plug wires are a fully custom design. Precision Raceworks is the only manufacturer worldwide to create spark plug wires with boots specifically designed for the N54 BMW, ensuring optimal fitment and superior quality.

Show More Show Less

ECS Billet Aluminum Oil Filter Cap - Black Anodized - N63 S63 ...

10X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:641063

Part#: 006060LA01

In Stock

Sale - Save 25% $ 183.99

This product was last offered at the strikethrough price on
06-14-2026

$ 137.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 183.99

This product was last offered at the strikethrough price on
06-14-2026

$ 137.99 USD

Add to Wish List

BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This aluminum cap is much more sturdy and features a standard 19mm hex post on the top. 19mm is also the size of your engine oil drain plug, reducing the number of tools that you need to complete an oil change. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 2 Business Days

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Precision Raceworks Replacement Spark Plug Wires - Blue - Set of 6 - ...

Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:3786918

Part#: 201-0002

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The Precision Raceworks N54 N55 Manifold Location Replacement Spark Plug Wires are the same wires that come with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits, featuring low-resistance, high-performance spark plug wires. These wires are 100% custom-designed from the ground up to meet or exceed OEM requirements and feature seals that are both dust and water resistant. These spark plug wires work with Precision Raceworks' BMW N54 and N55 High Performance Ignition Kits 601-0021 or 601-0149.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 7 Series F02 (2009+)

Sub-Categories

Fuel Filter Replacement Guidelines:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results