Please ensure your correct model is selected
This product was last offered at the strikethrough price on
06-08-2026
Pulleys begin to squeak once they are reaching the end of their life span and the tensioners can fail, no longer applying enough tension to the accessory belt. If not replaced, tese can seize up and lead to a long host of problems that would leave you stranded on the side of the road. Prevent this with routine maintenance and replace your belts and pulleys every 50,000 miles to ensure continued reliability.
Fits the following BMW chassis:
F22/23 F87 F3X F07/10/11 F06/12/13 F01/02 F25/26 E70/71 F15/16
Fits the following BMW engines:
N55 3.0L, S65 3.0L
This product was last offered at the strikethrough price on
08-28-2026
This product was last offered at the strikethrough price on
09-02-2026
This product was last offered at the strikethrough price on
05-06-2026
This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).
OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMW Chassis:
E70,E71,F06,F07,F10,F12,F13,F15,F16,F01,F02,
Fits BMW Engines including:
N55
BMW N54 N55 N63 S63 HJS V-Band Exhaust Clamp - Priced Each is designed for superior performance and reliability in exhaust system maintenance and upgrades. Engineered by Turner Motorsport, this high-quality clamp ensures a secure and leak-free connection in your BMW's exhaust system.
This product was last offered at the strikethrough price on
05-07-2026
Crafted from impact-resistant ABS plastic, Clinched manufactures fender flares akin to OE bumpers, ensuring both durability and lightweight properties. These adaptable fender flares offer universal fitting, suitable for various vehicle makes and models with minimal adjustments. Choose between seamlessly blending them with the car's body or showcasing them with visible rivets and edges.
Installation involves rivets and bolts, requiring drilling and cutting of the original fenders for proper fitting. Utilize a heat gun or hair dryer to heat and mold the flares, allowing them to conform to the factory body lines. Their remarkable pliability distinguishes them from fiberglass flares.
This product was last offered at the strikethrough price on
06-29-2026
Transform your BMW's appearance and durability with Clinched Fender Flares, expertly crafted from premium-grade, impact-resistant ABS plastic. Engineered to match the material of OE bumpers, these flares offer superior strength while remaining lightweight. Designed to fit a wide range of makes and models, they can be seamlessly integrated into your car's body or left to showcase rivets and edges for added flair. Installation involves drilling and cutting your original fenders, with rivets and bolts ensuring a secure attachment. Use a heat gun or hair dryer to mold the flares to your vehicle's contours, taking advantage of their exceptional pliability for a perfect fit.
Crafted from high-quality, impact-resistant ABS plastic, Clinched manufactures universal fender flares suitable for various makes and models, including BMWs. These flares, akin to OE bumpers, offer exceptional strength combined with lightweight properties. Universally designed, they require minimal customization for installation. You have the option to seamlessly blend them with your car's body or leave them with exposed rivets and edges for a distinct look. Please note, installation involves drilling and cutting the original fenders. Using a heat gun (or hair dryer) aids in molding the flares to conform to your vehicle's factory body lines, thanks to their high pliability, setting them apart from fiberglass alternatives.
Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.
This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
Upgrade the appearance and durability of your BMW with Clinched Universal Fender Flares. Crafted from high-quality, impact-resistant ABS plastic, these fender flares offer strength and lightweight performance. They are designed to be versatile, suitable for installation on various makes and models with minimal customization. Whether blended with the car body or left with exposed rivets and edges, Clinched Flares provide a distinctive look.
Revamp your vehicle's appearance with Clinched Fender Flares, expertly crafted from high-quality, impact-resistant ABS plastic, ensuring strength and lightweight construction similar to OE bumpers. Designed for versatility, these universal flares offer compatibility with various makes and models, allowing easy installation with minor adjustments. Customize your vehicle's look by blending the flares seamlessly with the car's body or leaving them with exposed rivets and edges.
Clinched Flares are installed using rivets and bolts, requiring drilling and cutting of the original fenders for installation. Heat the flares with a heat gun or hair dryer to mold them precisely along the factory body lines. These flares stand out due to their high pliability, distinguishing them from fiberglass alternatives.
This product was last offered at the strikethrough price on
08-27-2026
9cm "Classic" Universal Fender Flares - Pair are expertly crafted by Clinched from high-quality, impact-resistant ABS plastic, a material commonly used for OEM bumpers. These fender flares are designed to be versatile and can fit a wide range of makes and models with minimal customization.
These fender flares are installed using rivets and bolts, ensuring a secure fit. The pliable nature of the ABS plastic allows for easy molding and adherence to your vehicle’s contours.
Clinched specializes in crafting fender flares using high-quality, impact-resistant ABS plastic, akin to the material used in OE bumpers. These flares exhibit:
The installation of Clinched Flares necessitates the drilling and cutting of original fenders. By using a heat gun or hairdryer, the flares can be shaped to fit seamlessly along the factory body lines, highlighting their exceptional pliability compared to fiberglass alternatives.
These are the OEM front brake pads to fit the front of the specific BMWs listed below. BMW used several different suppliers for their brake pads and we buy direct from their distributors to get you the same pad as originally equipped but at a fraction of the cost of the local BMW dealer. These are the same pads as what originally came on your car but without the expensive BMW logo.
This item fits the following BMWs:
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
2012+ F12 BMW 640i 640i xDrive
2011+ F10 BMW 535i 535i xDrive
Rubber Gasket - 5 Meters is a versatile sealing solution suitable for various applications. This high-quality rubber gasket comes in a 5-meter length, providing ample material for multiple projects. With its durable construction and flexible design, it offers excellent sealing properties, ensuring protection against moisture, dust, and other contaminants. Whether for automotive, industrial, or household use, this rubber gasket is a reliable choice for sealing needs.
Upgrade your sealing solutions with the Rubber Gasket - 5 Meters and enjoy reliable protection in automotive, industrial, or household applications.
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
06-24-2026
This product was last offered at the strikethrough price on
06-24-2026
This product was last offered at the strikethrough price on
05-07-2026
Pagid Coated Front Brake Rotor (374 Mm) with Riveted Rotor Hat is a high-performance, corrosion-resistant brake rotor designed specifically for BMW vehicles. Available through Turner Motorsport, this 374 mm front brake rotor by Pagid delivers superior stopping power, reliability, and longevity for drivers who demand excellence from their braking system. With its advanced coating, this rotor provides robust protection against rust and corrosion, ensuring it remains durable under various weather conditions. Its precision engineering guarantees a perfect fit for BMW models, making it an ideal upgrade or replacement.
Constructed with high-quality materials, the Pagid Coated Front Brake Rotor minimizes noise and vibration while enhancing overall braking efficiency, making it perfect for daily driving and high-performance needs alike.
Upgrade your BMW’s braking system with Pagid Coated Front Brake Rotor (374 Mm) from Turner Motorsport for reliable, high-quality stopping power and long-lasting durability.
15cm "Muscle" Universal Fender Flares - Pair are crafted from high-quality, impact-resistant ABS plastic, the same durable material used in OE bumpers. Designed for a universal fit, these fender flares offer both strength and lightweight performance, making them a versatile addition to various makes and models with minor customization.
Enhance your vehicle's look and protection with these high-performance fender flares.
Pagid Coated Front Brake Rotor (374 Mm) is crafted to deliver exceptional braking power and durability for BMW owners who seek reliable, high-performance braking components. Available through Turner Motorsport, this premium front brake rotor from Pagid features an advanced anti-corrosion coating that protects against rust and extends the rotor’s lifespan, even in harsh weather conditions. Precision-engineered for BMW models, this rotor ensures a seamless fit, enhancing both safety and braking efficiency.
The Pagid Coated Front Brake Rotor is built to reduce noise and vibration, providing a smooth, quiet, and comfortable driving experience. Designed with premium materials, it offers lasting durability and is ideal for both daily driving and high-performance needs.
Choose Pagid Coated Front Brake Rotor (374 Mm) from Turner Motorsport to enjoy optimal braking performance and dependable durability for your BMW.
A versatile exterior enhancement for vehicles seeking a rugged and stylish look. Crafted with durable materials, these fender flares offer increased tire coverage and protection from road debris.
