BMW Wheels - Genuine & Performance for BMW 6 Series F06 (2013+)

Clear BMW chassis

Please ensure your correct model is selected

The wheels and stance often make the look of the car complete. If your factory alloys are missing center caps, curb-rashed beyond recognition, or have been damaged, we have your replacements all picked out. For a performance-oriented driver, aftermarket alloys shed weight and offer improved aesthetics over the factory options. Space out your stance with our selection of wheel spacers, completely change the look and feel of your BMW with forged or flow-formed aftermarket alloys, or replace old wheels with factory options.

Sub-Categories

Sort By:
MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F80 F82 F87
MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F8...
MSI Racing - Corporate Logo
T#:340355
Part#: MSI-M14X125
In Stock
Starting at $ 25.98 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 25.98 USD
Free Shipping on orders $49 and up
Add to Wish List

 

  • 70MM, 80MM, OR 90MM OVERALL LENGTH
  • OUR HIGHEST-GRADE PREMIUM WHEEL STUD
  • DRY LUBE WITH BLACK M-PHOSPHATE COATING
  • STUD FOR RACE/TRACK USE
  • CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
  • USE WITH 14x1.5 NUT
  • For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.

    These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

    We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
     

    FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:

  • Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
  • Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
  • Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
  • Heat-treated aircraft quality alloy steel
  • Developed from over 20 years of top level NASCAR use
  • These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).

    Sold per stud.
    Wheel nuts sold separately.
Show More Show Less
Turner Black BMW 10mm Wheel Spacers (Pair) - Most BMWs (see applications)
Turner Black BMW 10mm Wheel Spacers (Pair) - Most BMWs (see applicati...
For use on front hubs only
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:304114
Part#: TWH9905010BLACK
In Stock
Sale - Save 25% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 113.24 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 25%
$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 113.24 USD
Free Shipping on orders $49 and up
Add to Wish List
10MM (.39 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4
Turner Black BMW 15mm Wheel Spacers (Pair) - Most BMWs (see applications)
Turner Black BMW 15mm Wheel Spacers (Pair) - Most BMWs (see applicati...
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:304118
Part#: TWH9905015BLACK
In Stock
Sale - Save 25% $ 170.99

This product was last offered at the strikethrough price on
05-03-2026

$ 128.24 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 25%
$ 170.99

This product was last offered at the strikethrough price on
05-03-2026

$ 128.24 USD
Free Shipping on orders $49 and up
Add to Wish List
15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser-engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive
Show More Show Less
Turner Black BMW 12.5mm Wheel Spacers (Pair) - Most BMWs (see applications)
Turner Black BMW 12.5mm Wheel Spacers (Pair) - Most BMWs (see applica...
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:304116
Part#: TWH9905013BLACK
In Stock
Sale - Save 20% $ 144.99

This product was last offered at the strikethrough price on
06-13-2026

$ 115.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 20%
$ 144.99

This product was last offered at the strikethrough price on
06-13-2026

$ 115.99 USD
Free Shipping on orders $49 and up
Add to Wish List
12.5MM (.49 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser-engraved size and part number for easy identification stealthy anthracite or black color Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive
Show More Show Less
Turner Black BMW 5mm Wheel Spacers (Pair) - Most BMWs (see applications)
Turner Black BMW 5mm Wheel Spacers (Pair) - Most BMWs (see applicatio...
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:304113
Part#: TWH9905005BLACK
Ships on Nov 2, 2026
Sale - Save 25% $ 129.99

This product was last offered at the strikethrough price on
06-13-2026

$ 97.49 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 25%
$ 129.99

This product was last offered at the strikethrough price on
06-13-2026

$ 97.49 USD
Free Shipping on orders $49 and up
Add to Wish List
Made in the USA 5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems. A spacer fits between the wheel and the hub assembly. The wheel will be pushed further outboard by the thickness of the spacer. Spacers allow you to correct wheel offset issues when the wheel is too 'tucked in' to the bodywork, clear the wheel from contact with the suspension or inner bodywork, clear larger brakes, improve handling and stability by increasing track width, or simply to get the right look and stance. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum � light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ optional extended bolt sets in factory-matching black or bright silver finish (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Wheel Spacer Tech & FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

Spacer Specs
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Extended Wheel Bolts
Required for all BMW wheel spacers is a set of longer wheel bolts or wheel studs. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.


5mm spacer note: a 5mm spacer sits on the existing hub lip but leaves less than 5mm of lip for the wheel to rest on. Therefore, wheels that have a bevel around the center bore will not engage the hub lip and may reseult in a vibration.


+ Year & Model Applications
(click to expand)
2008+ E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less
Turner Black BMW 7.5mm Front Wheel Spacer Kit - E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, Z3, Z4
Turner Black BMW 7.5mm Front Wheel Spacer Kit - E24, E28, E30 M3, E31...
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:304109
Part#: TWH9905003BLACK
In Stock
Sale - Save 53% $ 141.99

This product was last offered at the strikethrough price on
05-03-2026

$ 66.15 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 53%
$ 141.99

This product was last offered at the strikethrough price on
05-03-2026

$ 66.15 USD
Free Shipping on orders $49 and up
Add to Wish List
Our 7.5mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal.
Turner Black BMW 20mm Wheel Spacers (Pair) - Most BMWs (see applications)
Turner Black BMW 20mm Wheel Spacers (Pair) - Most BMWs (see applicati...
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:304121
Part#: TWH9905020BLACK
In Stock
Sale - Save 18% $ 155.99

This product was last offered at the strikethrough price on
05-03-2026

$ 127.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 18%
$ 155.99

This product was last offered at the strikethrough price on
05-03-2026

$ 127.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Our 20mm wheel spacers are lightweight, featuring a durable coating and quick release pockets for easy removal. Longer wheel bolts are required!
Turner BMW 17.5mm Wheel Spacers (Pair) - Most BMWs (see applications)
Turner BMW 17.5mm Wheel Spacers (Pair) - Most BMWs (see applications)...
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:2666
Part#: TWH9905018
In Stock
Sale - Save 40% $ 99.99

This product was last offered at the strikethrough price on
05-03-2026

$ 60.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 40%
$ 99.99

This product was last offered at the strikethrough price on
05-03-2026

$ 60.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Made in the USA 17.5MM (.69 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X),Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems. A spacer fits between the wheel and the hub assembly. The wheel will be pushed further outboard by the thickness of the spacer. Spacers allow you to correct wheel offset issues when the wheel is too 'tucked in' to the bodywork, clear the wheel from contact with the suspension or inner bodywork, clear larger brakes, improve handling and stability by increasing track width, or simply to get the right look and stance. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features
+ hub-centric design, 1-piece spacer with hub-centric lip
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum � light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ optional extended bolt sets in factory-matching black or bright silver finish (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Wheel Spacer Tech & FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

Spacer Specs
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Extended Wheel Bolts
Required for all BMW wheel spacers is a set of longer wheel bolts or wheel studs. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.


+ Year & Model Applications
(click to expand)
2008+ E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
2015+ F80 BMW M3 - Sedan
2015+ F82 BMW M4 - Coupe
2015+ F83 BMW M4 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less
BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four
BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four ...
Black Forest Industries - Corporate Logo
T#:31158762
Part#: WBFI77-E88-501
Ships in 7 Business Days
$ 229.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 229.99 USD
Free Shipping on orders $49 and up
Add to Wish List

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

  • Provide a polished, high-quality look by covering the open center hole
  • Are machined from 6061-T5611 aluminum for superior strength and durability
  • Feature a hand-brushed finish for a seamless OEM appearance
  • Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
  • Are sold in sets of four, with center caps not included
Show More Show Less
M14x1.5, 19mm Lug Nut - Black
M14x1.5, 19mm Lug Nut - Black
MSI Racing - Corporate Logo
T#:641222
Part#: 40.0001BLK
In Stock
$ 5.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 5.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Replacement M14x1.5 19mm Lug nut
Wheel Bolt for BMW, MINI - 14x1.25 - Black - E70, F01, F10, F25, F30, MINI R56
Wheel Bolt for BMW, MINI - 14x1.25 - Black - E70, F01, F10, F25, F30,...
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:338263
Part#: 14253501X
In Stock
Starting at $ 5.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 5.99 USD
Free Shipping on orders $49 and up
Add to Wish List
If you are installing wheel spacers you will need longer bolts to accommodate the extra width. BMW changed their wheel bolt specs around 2006 to use a larger diameter bolt with a rare thread pitch. These 14 x 1.25mm black spacer bolts are correct for the models listed below and have a 17mm head (same as stock). Watch out if you're buying spacers and bolts for these cars as some other retailers are still not up on the change... Replaces BMW part number 36136781151.

Bolts are sold per bolt (each). You can enter the quantity you need below after clicking Update Price button below or from the shopping cart.

Choose the extended length bolt you need below based on the size / thickness of the wheel spacer you are using.

These 14x1.25 bolts fit the following BMWs:
2014+ F22 BMW 228i 228i xDrive M235i M235i xDrive
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
2015+ F80 BMW M3
2015+ F82 BMW M4
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive M5
2012+ F12 BMW 640i 640i xDrive 650i 650i xDrive M6
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe 650i Gran Coupe 650i xDrive Gran Coupe M6 Gran Coupe
2009+ F01 BMW 750i 750li 750i xDrive 750li xDrive 760li
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2015+ F26 BMW X4 xDrive28i X4 xDrive35i
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i X5M
2014+ F15 BMW X5 sDrive35i X5 xDrive35d X5 xDrive35i X5 xDrive50i
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
2007+ R56 MINI MINI Cooper, MINI Cooper S
2007+ R55 MINI MINI Cooper Clubman, MINI Cooper S Clubman
2007+ R57 MINI MINI Cooper Convertible, MINI Cooper S Convertible,
Show More Show Less
APEX Wheels Metal Valve Stem - Black - BMW & MINI
APEX Wheels Metal Valve Stem - Black - BMW & MINI
2X Entries Into Our F80 M3 Sweepstakes
APEX Wheels - Corporate Logo
T#:593644
Part#: HW-OEM-VALVE-BK
Ships in 2 Business Days
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
Extended Wheel Bolt - M12x1.5 - 35mm
Extended Wheel Bolt - M12x1.5 - 35mm
Black Forest Industries - Corporate Logo
T#:50899204
Part#: BFI-906-LUG
Ships on Oct 12, 2026
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Specifically engineered for vehicles utilizing a wheel stud conversion.
Black Forest Industries Extended Wheel Bolt - M14x1.25 - 40mm
Black Forest Industries Extended Wheel Bolt - M14x1.25 - 40mm ...
Black Forest Industries - Corporate Logo
T#:50899207
Part#: BFI-905-LUG
Ships on Oct 12, 2026
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Specifically designed for use with 10mm to 15mm wheel spacers to maintain proper thread reach.
Seasonal Tire Tote (set of 4)
Seasonal Tire Tote (set of 4)
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:3463
Part#: 00036
In Stock
Sale - Save 18% $ 71.99

This product was last offered at the strikethrough price on
06-13-2026

$ 58.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 18%
$ 71.99

This product was last offered at the strikethrough price on
06-13-2026

$ 58.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Add to Wish List
Tire carrying and storage system that alleviates the mess and strain of seasonal tire change.

Benefits:
�+�Protects clothing from tire and brake residue
�+�Easier to carry tire
�+�Protects vehicle interior from tire & brake residue
�+�Organizes garage
�+�One size fits all
�+�Extends the life of the tire
�+�Machine Washable
+�Rugged long lasting construction

Kit Includes : - Four Tire Bags, fit most passenger vehicles. (22" through 31" tire)
Show More Show Less
Drive Click Style Inch /Lbs Torque Wrench 3/8" 25-250 In /Lbs
Drive Click Style Inch /Lbs Torque Wrench 3/8" 25-250 In /Lbs ...
OEM Tools - Corporate Logo
T#:641927
Part#: OEM25685
In Stock
$ 50.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 50.99 USD
Free Shipping on orders $49 and up
Add to Wish List

Drive Click Style Inch/Lbs Torque Wrench 3/8" 25-250 In/Lbs offers precise and reliable torque measurement for various applications. This high-quality torque wrench features a 3/8" drive head and measures torque from 25 to 250 inch-pounds, making it ideal for both professional and DIY use. The wrench is designed with a precision 45-tooth ratchet head that provides accurate torque control and an audible click to signal when the desired torque is reached. Its impact-resistant handle ensures durability, and it includes a case for convenient storage.

  • Measures torque from 25-250 inch-pounds for versatile use
  • Precision control with a 45-tooth ratchet head
  • Audible click indicates when the desired torque is achieved
  • Both clockwise and counterclockwise operation
  • Durable, impact-resistant handle and includes a storage case
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping