Fluids for BMW 5 Series F10 (2011-2016)

This is Red Line's latest synthetic transmission fluid that is compatible with BMW's MTF-LT3 transmission fluid. This is the transmission fluid used in both manual and automatic transmissions since the mid-2000's. To confirm, check the decal located on the side of your transmission. Price is per quart.

Synthetic D6 ATF is a lower viscosity version of the D4ATF and is designed for better fuel efficiency in CAFE testing. Dexron VI requires a different approach to a conventional ATF formulation. Rather than beginning with a 7.5 cSt fluid and allowing a viscosity loss in use to drop to 5.5 cSt, the Dexron VI fluid requires a starting viscosity of less than 6.4 and a final drop to no less than 5.5 cSt. Red Line D6 will drop to no less than 6.1 cSt. Since the final viscosity after use of these fluids are similar, Dexron VI fluids can be used where Dexron III fluids were previously recommended (with the exception of some manual transmission applications, our customers report).

D6 ATF also provides significantly improved gear protection and will provide a GL-4 level of gear protection. The balanced frictional characteristics provide smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.

Suitable replacement for the following BMW part numbers: BMW ATF 3 BMW ATF 3+ 83220142516 (M-1375.4) 83222152426 (M-L12108) 83220432807 83220397114 MTF-LT-3 83222289720 83222305397 ZF Lifeguard 6/6 PLUS 8 ZF6/8

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.�

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!� MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Technical Specifications:�

Density at 15�C - .855kg/cm3
Viscosity at 40�C - 80.7mm�/s
Viscosity at 100�C - 14.0mm�/s
Viscosity Index - 180
Flash Point - 230�C
Recommended for the following oil and manufacturer specifications:

ACEA A3
ACEA B4
API SN
API CF
Porsche A40
Renault RN 0700
VW 502.00
VW 505.00

Liqui-Moly Top Tec 4110 Engine Oil (5w-40) - 1 Liter for your BMW

Upgrade your BMW with Turner Motorsport's Liqui-Moly Top Tec 4110 Engine Oil (5w-40) - 1 Liter. This top-class fully synthetic, low-SAPS motor oil features the latest additive technology, ensuring superior performance and efficiency in modern gasoline and diesel vehicles, whether equipped with or without particulate filters (GPF / DPF). It guarantees the lowest friction and outstanding protection even under tough operating conditions in high-performance engines.

Key Benefits:

• Outstanding lubrication reliability
• Rapid oil penetration
• Excellent high-pressure and wear protection properties
• Prevents the build-up of deposits
• Outstanding engine cleanliness
• Optimum stability to aging
• Reduces fuel consumption
• Compatible for use with turbochargers and catalytic converters

Specifications and Approvals:

• ACEA C3, API SN
• BMW Longlife-04 (LL-04) - Backwards compatible with Longlife-98 (LL-98) and Longlife-01 (LL-01)
• MB-Approval 229.31, MB-Approval 229.51, MB-Approval 229.52
• Porsche C40
• VW 511 00

Recommended for Specifications:

• GM dexos2
• MB 226.5
• Renault RN 0700, Renault RN 0710

Specifically developed for selected gasoline and diesel engines of the latest generation. Tested safe with catalytic converters and turbochargers. Depending on the manufacturer's instructions, extended oil change intervals can be achieved.

Founded more than 50 years ago, Liqui Moly GmbH from Ulm in southern Germany offers a wide variety of high-quality products including motor oils, additives, car care products, and chemically-based technical solutions for automotive applications. Liqui Moly develops and tests its products in its own laboratories, manufactures only

Enhance Your BMW's Performance with Red Line 75W90 Gear Oil

Enhance the performance of your BMW's differentials and manual transmissions with Red Line 75W90 Gear Oil, a top choice for fluid service. This gear oil is ideal for car and light truck differentials, including those in racing applications. It contains a special friction modifier for limited slip differentials and promotes smooth shifting in both cold and hot conditions. Red Line 75W90 exceeds API GL-5 specifications and can be used in transmissions requiring 75W, 80W, or 85W GL-4 gear oils, as well as SAE 30 or 5W/10W30 motor oils. For specific requirements like SAE 90 GL-5 gear oil, Red Line offers compatible alternatives like 75W90NS or 75W140NS Gear Oil.

Benefits:

• Ideal for BMW differentials and manual transmissions
• Special friction modifier for limited slip differentials
• Promotes smooth shifting in various conditions
• Exceeds API GL-5 specifications
• Compatible with a wide range of transmission requirements

All sets of 12 now 10% off regular price!

Synthetic D4 ATF is suitable for use where Dexron III, Dexron II, or Mercon fluids are recommended. ATF D4 is similar to Red Line's MTL formula and can be used in many BMW manual transmissions where MTF or MTF-LT2 is called for. The D4 ATF provides significantly improved gear protection than most OEM oils. The balanced frictional characteristics provides smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.

Features:

• Provides G-4 level gear protection (suitable for transmissions and transaxles, like the Corvette T-56).
• Provides smooth and consistent shifts.
• More stable than petroleum fluids; suitable for extended drain intervals.
• Does not varnish at high temperatures.
• Improved cold weather characteristics.

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.�

Synthoil Premium engine oil is a�fully synthetic�engine oil designed to provide the highest amount of engine wear protection as well as fuel savings and reduced oil consumption possible - Liqui Moly prides Synthoil on its ability to withstand�long intervals�between oil changes and provide protection in extremely demanding conditions. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.�

Approved for the following specifications:

• ACEA A3-04 / B4-04
• API SM / CF

Recommended for the following specifications:

• BMW Longlife-98
• MB 229.3
• Porsche A40
• VAG 502.00 / 505.00

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.